Video není dostupné.
Omlouváme se.
Dremel Bits And Accessory Guide Overview
Vložit
- čas přidán 15. 08. 2024
- In this video I explain about some of the more common Dremel bits and accessories. This is a valuable video for beginners and a guide to the Dremel Accessories. I explain what they are and what they can be used for. I go through each bit and accessory 1 by 1 and give a close up look. Learn what these bits and accessories are and what you could use them for!
AFFILIATE DISCLAIMER PLEASE READ:
The links below are affiliate links. This means I will earn a small commission, at no additional cost to you, if you choose to click the link and make a qualifying purchase. As an Amazon Associate I earn from qualifying purchases.
Amazon:
Dremel Sanding Band (Select Your Grit Size) On Amazon - amzn.to/3KC0KJM
Dremel 429 Polishing Wheel On Amazon - amzn.to/3EXXTHx
Dremel EZ Lock Mandrel EZ402 On Amazon - amzn.to/3xODgJw
Dremel Polishing Compound On Amazon - amzn.to/3XTn8kI
Basic Safety Equipment - Safety Glasses On Amazon - amzn.to/3IDvbfU
Basic Safety Equipment - Nitrile Gloves On Amazon - amzn.to/3J6BUAx
Basic Safety Equipment - N95 Masks On Amazon - amzn.to/41BrTCy
Basic Safety Equipment - Earplugs On Amazon - amzn.to/3kFfj4u
Intro/Outro Music: RKVC - Tropical Thunder
DISCLAIMER PLEASE READ:
For reasons beyond the control of Todd’s Garage there is no guarantee of the information in this video and/or description. Use of the information in this video and/or description is at your own risk. Todd’s Garage recommends the use of proper safety equipment and taking all safety precautions when working with the tools, items, or other things seen or talked about in this video and/or description. The information in this video and/or description does not guarantee a certain result or warranty of any kind, expressed or implied. Under no circumstances shall Todd’s Garage have any liability or responsibility for any injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description. Any Injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description is the sole responsibility and liability of the user.
Finally found a good video that explains a lot of whats in the box. Thank you
I have literally just watched 7.36 hours of video to just find out the names of the different bits and how to install them. My thanks to you in the deepest and kindest of ways… You truly have no idea how much I appreciate your video and just thank you for getting straight to the point and answering what I felt like was a very simple question. Thank you.
Thank you! I couldn’t figure out how the “ezlock” worked.
Thank you! I’ve been trying to figure out a couple of these for awhile now. Trial and error and trying to look through the manual let me figure out 70%. You are my hero for this overview - exactly what I needed and something any beginner w a Dremmel should watch.
This video was extremely helpful to me. I'm new to using a rotary tool (or any tool for that matter), and this video put me more at ease and helped me have a foundation to start a few projects.
Can you use it with a Milwaukee drill ?
found this guide EXTREMELY helpful, thank you!
Thank you watching, I appreciate the feedback!
Thank you for a making the BEST video for beginners. I got Dremel 4000 went through many videos, tried to decipher the manual book to figure out how to use the attachments .. no one and nothing was as helpful as this video.. THANK YOU SOOOOO MUCH!!!!
Thank God for you tube and you. Lost my manual and I was having a hell of a time just putting bits in!!!!!! Again, THANKS
Thanks Todd! Helpful for all rotary tool beginners.
Hi Patrick and thanks for watching. I appreciate the feedback!
Best vid on how to use these accessories hands down! Thank you!
Thanks for watching, and I appreciate the feedback!
Great video thanks. I had so many bits in my box that I didn’t know what to do with. It would be fantastic if you could do a video demonstrating how they can be used in action?????
Excellent video! I can finally use many of my Dremel bits properly! Thank you for detailing each of the bits and their usage.
Excellent video, answered a lot of questions I had about that box full of accessories that came with my Dremel
Thanks for watching, I appreciate the feedback!
I don't have Dremel brand but i needed to know that the felt tips go with the mandrel. Thanks 👍🏼
Your videos are so helpful to get started using the dremel tool
I just needed a simple tutorial and your really helped!
The wrench screwdriver end can also be used to unscrew the plastic brush covers & screw them back.
Thanks for this video. My generic rotary tool kit did not come with a manual and this really helped!
Thank you. Helpful I took notes.
Learned a lot. I’m saving this video for future reference.
This was very (emphasis added) helpful, thank you. Whilst watching the video, I couldn't help but think of that smart kid in school that would always preface their questions in class w "isn't it true that...." Thumbs up on video!!!
Hi and thanks for watching. Thank you for the feedback and I am glad this video was helpful!
Never knew what that felt mandrel was for or what it was called. THANK YOU!
Cool. I tried the EZ-lock system with the metal cutting wheel. It works really well at moderate speed and light pressure cutting steel (don't bog it down or it will break). I'm still on my first one and have done a solid 10min of cutting with it. Gonna pickup some AO ones to fix some very old door latches. Just picked up a Milwaukee m12 rotary tool and it is very nice not having the cord.
I’m just started using My Dremel tool and this helps a lot thanks
Great video! Thank you for taking the time to explain the various bits and how to install them!
Thank you for the overview
Very good instructional video. Thank you
Thanks to you now I know how to use the accessories. Don’t know how to thank you 😄
very informative, thank you
super helpful! I didn't know what to do with most of my dremel accessories, thanks!
i'v had mine for a year and it didn't came with a guidebooks. very helpful video thanks a lot!
Thank you, I have a kit with most of the tools you have listed and a few extras. Was not sure what all the pieces were for, therefore, this is an extremely resourceful video that I plan to save in the project folder. Thank you again for creating this video. Carmelle from MN
So helpful and clear, understandable voice.
Thank you so much! This is so usefulll
This is the perfect explanation very simple and direct to the point easy to understand salute mate
Thank you very helpful video
Wow- Thanks for posting this- I broke a few of the cutting stones trying to figure out how to get em to stay on the bit-
This is the best video clear and precise thankyou
A great instructional video that goes straight o the point. Other videos are so long winded. I just subscribed and look forward to more interesting videos. I have a Dremel 4000, Motosaw and workstation. Great tools for my work. Thanks Todd. Really appreciate you. Regards from Singapore.
Thank you. This was good information which I look forward to putting it to use
Thank you so much. Very well explained that this beginner is happy! 😀
Hey Tom - Wow, thank you so much for this - exactly what I needed! Really appreciate it
Thanks man for a great vid. Your gloves make me think of neferious activities so I am glad you werent detailing chainsaws or hacksaws in a dungeon environment. Peace out.
This is a great little video! You really helped me get the hang of my first-ever Dremel. Thanks man!
Thank you for your explanation. I have a few more from power smith tool kit.
Your a super star bud thank you. Cos now M in my garage sanding & cutting anything my end connects with even my finger at one point. Can someone tell me how you know what grade sand drum is plz ???
Thx for the video.. I never knew what the bit for the polishing wheel was used for till now.
Just arrived. I didn’t have any idea how to use it and for what. Great info
Thanks for watching and I am glad the video helped!
Learned something new. Thank you!
before even watching this, this should be pretty useful because i bought a full dremel accessory pack and the bastard didnt come with any description of what the bits were for
Thanks for watching, I hope the video was helpful!
Thankyou. I can now use the dremel I was given. Manual is too complicated, much prefer a visual demo.
Super presentation on a device that is not clear how to use in the instructions, whatsoever. Thanks much.
Thank you! ☺️💖 My boyfriend is making me learn all of the parts before he lets me use it lol
This was just what I needed, thank you!
Thanks a lot buddy had no idea what some of the things were for.
Very useful for beginners like me many thanks... All the best
Thanks, very helpful.
Your video is a big help to thanks very much 😀
Thanks, wish you would've demonstrated the usage of the bits.
Thanks. Just got a Dremel.
Great video man! Thanks!
Anyone who gets a new Dremel should watch this video! The manual doesn’t even tell you what each bit is for.
Brilliant. Thank you for sharing
very helpful thanks for posting
Had a basic idea thank you for your time making the video
Thanks for watching, I am glad the video helped!
Would the cutting bit or carving bit work on a stripped drywall screw? Screw extractor broke the screw more so will I be able to dremel out what's left?
Can you use those little tools with a Milwaukee drill it’s a m18 drill 18V
I'm trying to find which piece works best for trimming/sanding down dog nails
Very useful thank you! 😁
Important safety tip: The thin cutting disks have a tendency to shatter (had one incident) so: eye protection!
I opened it up and looked at the manual. Couldn’t for the life of me figure out what the buffing pads attach to. Thanks for this video!
Very helpful. Thank you.
I Have 2 Ryobi Rotary Tools &
A Dremel Rotary Tool
Also. One Of My Ryobi
Tools uses An 18 Volt Battery
& Is A Flex Shaft Tool.
& The other Ryobi Tool Uses A 4 Volt
USB Battery & It Works Pretty Good
Great work! do you know if the flat headed mandrel and adhesive sanding discs are sold separately? Just thinking about replacements down the road?
Really helpful thank you!!!
What are the razors for? I mean it's fun to attach them on the end and it makes a interesting cutter.. but it doesn't seem like a razor blade goes in a drammel idk
Many thanks. Todd. Super helpful. I couldn’t find the link to the cutting guide. I struggle with that bit and could use some help. Can you add a link please?
Found it! czcams.com/video/62yfnTvVtHI/video.html&feature=shares
The cut off wheel on my drenel was so cheap it flew off or break
Thank you for this. It was very helpful. But I don't know which way to turn the screw on the sand drum. It's really tight and it seems like I'm stripping the screw and I don't want to damage it. I tried both ways and it won't move. Can you advise, please?
Righty tighty, lefty loosy
yeah, I know. The thing is damaged. It was a bad screw. I tried one of the others and it came off fine.
@@papermoon50 I cannot unscrew mine either. I've had mine for years and watching this video made me realize I could solve a problem with a project I am working on. Got my mandrel out and could not get it to unscrew. I gave up on my project for tonight but will be going to find me a new one tomorrow. Pretty sure mine's bad too.
My issue is that I am not a daily user of dremel rotary tool and bits. But when I use them, I use them and store the used bits in a box, all mixed up. Then next time when I need to use them, I open the box and I am confused which bit is for what. What is their catalog number and what speed to run it at. I wish Dremel had marked at least the cutting and sanding wheels and drum s with their catalog numbers.
This is so helpful!!!
I can’t see how the sand paper discs could even work without a backing… do they just flop around? I can’t help but think there’s gotta be a different mandrel that is supposed to go with these they just didn’t wanna include in the 160pc set… they included soooo many discs though!
Thanks
Have You Seen The Ryobi USB
Rechargeable Rotary Tool?
Wery usefull 👍 how do you clean the white ones #429, #414?
That was very useful.
I had to shorten some screws and now they are all flat. Which dremel accessory you would advise to point them again (just enough to for them to guide themselves inside the wads on the wall)? Aluminum oxide grinding stones?
Thanks.
Thanks bro, for the life of me I couldn’t figure out how the sanding bands are supposed to stay on the sanding drum. I think that screw on the top just appeared after you mentioned them. 😅
Good instructional video!!!!
Thanks for watching, I appreciate the feedback!
Can this be used on a normal drill?
Great video 🥂
Estos acesorios lo trae la dreemel 4000 de 3 acoples y 36 acesorio
Multipurpose cutting bit is in fact side cutter .
Thank you
Thanks again~!
Thanks for watching my videos, I appreciate it!
Is there a jpg or pdf online where I can find this bit guide
The carbon steel brush and the Nylon steel brush look the same how do I know which one is which?
I mostly use mine for removing resin supports from 3d prints, may get more of those grinding stones for hard to reach areas and flattening out shapes, they have different colors, how do they differ?
Do you clean the bits ? If so how do you recommend to do that ?
I'm confused about the gloves... are the tools toxic?
Helpful overview, thanks very much.
Thanks for watching, I appreciate it!
Yay!!