Meiji Finer Force Type B Clearcoat Mini Spraygun Unboxing & physical Comparison To Kiwami1
Vložit
- čas přidán 5. 02. 2022
- My first Meiji spray gun the side cup Finer Force, haven't used it yet but if the build quality is anything to go by it will be excellent
Please Subscribe My CZcams Channel, link below
/ @peteshobbies5383
My Top 12 Mini Spray Guns Video,
• Top 12 Mini Spray Guns...
Below is a link to where i purchased it from
paintingtool_jp...
Follow on Facebook,
/ petes-hobbies-10370917...
Follow on Instagram,
/ petes_hobbies
Music: Shanhai
Musician: FOREVERT
URL: icons8.com/music
All my videos are made for entertainment only, the views expressed are my own and should you choose to follow them you do so at your own risk.
Products, materials, machines and machinery used can be hazardous if used inappropriately, for your safety all will have instructions on there safe use either by contacting the manufacturer, viewing on manufacturers web sites, viewing there operating instructions or via technical data sheets, ensuring you are familiar with all this information will help with safe use of equipment and products.
Your local health and safety executive with help with information for the safe use and disposal of materials in accordance with your local environmental health regulations.
Thanks for watching
Very nice looking gun and I also like their full size guns , I think yours will lay the clear down beautifully
Hi Roger, I haven't seen much of their larger guns to be honest, I thought I would get one of these because they are quite similar to the W101 and Kiwami1 Iwata which I really like, I took a chance on the fitment of the cup being the same as the Iwatas and luckily enough it was so only needed the gun, they are really well made so really looking forward to using it, cheers mate 👍
guy!what a ocol job, 😲
Thank you buddy 👍
Hi Pete, another great video, no need to rush mate when taking the gun apart remember we are all sitting here enjoying the video with a nice cup of tea 😀. Seriously I do know how you feel when your on camera you feel rushed into doing things, im not sure why that is but you just do sometimes. Cheers mate see you in the next one. Steve.
Thanks Steve, It's really funny, as you say you feel the need to rush, i think get as much information out as possible, I clean my guns throughout after each use so are always taking them apart and never take the tip off before the needle yet put a camera on my head and i do, looking forward to using this as it looks so well made, cheers buddy 👍
OK, I will wait for the review
@Zyuzja Zizin Thank you 👍
@@peteshobbies5383 It is strange everything goes out the window when you involve a camera. The gun looks fantastic and the fine threads on the knobs are a very nice touch. Interesting that these both have a hook arrangement on the top you could almost say it’s a copy of the other. I have to kus myself if I start to undo the tip before pulling the needle back out take it out altogether, like you I strip the gun and give it a good clean after each use then put it back together for a final rinse with thinners, note sure if this is necessary but makes me feel better 😁 cheers mate.
Looks a nice gun Pete, it's difficult for the viewer to tell if it's good quality but you can tell it's good when you removed the air cap it seemed to come of very easily plus I couldn't hear the usual rattle as unscrewed very smoothly, overall it's a nice looing gun so look forward to your review 👍
It's a really well made gun John so hopefully it should preform well 👍
Hi Pete, this is really super spray gun! When you test that gun?
Hi Mate, I've only just got it so will need time to give it a good test but it won't be too long before I have a video ready, cheers 👍
Hi Pete
Where did you see that gun “Knock Garage”?
That’s the only place I’ve seen one.
Question.If you were to rate your best clearcoat gun & best basecoat gun bar none irrespective of price, which two guns would you pick” for motorcycles”?
I know you have a wealth of gun testing.
The thing is buying cheaper guns to see if they could do the same job ends up costing alot more,than just buying the best two.😳
Hi Mate, never heard of Knock Garage so wasn't there, I found them on ebay, I search all the time for different sprayguns, just to see if anyone is selling something i may want and came across these.
I really like the Japanese stuff and really like my Kiwami1 Iwatas because of the side cups and this is very similar so thought i would get one to have a look.
To be honest i probably wouldn't have bothered because i thought 1.6 was a bit big for clear but i have a set of purple cap Kiwami1 which are the same as these in that you have a 1.4 for base and a 1.6 for clear and that works well so knew it's should be fine.
If your talking tanks and fairings, side panels and front mudguards on bikes i would go for a full size gun these days, they make it so easy and give a great finish especially for clearcoat.
If i was to pick one of each regardless of price for clear i would really struggle in choosing between the Sagola 4600 Xtreme DVR Clear, the Sata 5500x "0" and the Walcom 360 Carbonio, i normally pick the Sagola because it's cheaper but as i say i would struggle if price was not a worry.
For base i would go the Sagola 4600 Xtreme Aqua even with solvent or the DV1 base with the B+ cap, both are really good base guns
@@peteshobbies5383 Thanks for that comprehensive reply, really appreciate it.
Knock Garage is a CZcams channel like you & they use that gun.
Been looking at the kiwami after watching your vid but already have a Bellaria 400 Classic.
My favourite gun for clear is my Sata 3000rp 1.3 it’s fast but got used to it.👍
Have you seen Z11Kustom channel?
He lives in Russia & only has the barest of equipment but produces some great bike tanks?
@vonovine You're welcome , I'll have to give them a look up on CZcams then, cheers buddy 👍
@vonovine No, I'll have to look that up as well, I really like people that do good work with minimal amounts of equipment, that shows real expertise
Hii pete, im looking for mini gun for clearcoating, which one do you prefer between : sata minijet, devilbiss sri pro lite, and walcom ego 190 carbonio. Thank you before..
Hi Buddy, It would depend on what you want to do with it as to what i would recommend, of the three you mentioned the 190 is probably the best gun but is also the most expensive, the Sri is the best value for money, I'm not overly keen on the Sata, I really like there full size guns but the Minijet falls a bit short imo.
Let me know what your main use will be and I'll try and help more, cheers 👍
@@peteshobbies5383 thank you buddy, i want to get flat mirror finish, I usually use it for vespa bodyparts and another motorcycle parts.
If finish is your main priority I would suggest the DV1s or LPH80, they both atomise really fine but are slower especially the LPH80 as it has a small fan but they give really good results partially the DV1s but it's very expensive
@@peteshobbies5383 thankyou for your answer and recomendation. Stay safe and stay healty.. cheer 🥳
@wahyu adji wibowo Thanks mate, you too 👍
These are very similar to the Iwat,s
Hi mate, yes, very similar although the finish seems better, i took a chance the cups were the same fitting which they are so only bought the gun, looking forward to using it 😀 👍
@@peteshobbies5383 Yes, the chrome finish on the Iwata’s always have faults.
@vonovine I've never had a problem with the chrome lifting but i know people often do, these seem better made than the Iwatas so looking forward to seeing what it's like
No spanner ?? In a 1.6 man it must come out like a fire hose 😄😄😄
Pete is it another Chinese knock off?
Hi Dean, I've used the Iwata equivalent that is in the video which is also a 1.6 and it works really well, it's quite a wet pattern but being a mini gun it's perfectly controllable, that set has a 1.4 for the base which is the case with these Meijis as well, it's so well made though, i was really surprised
No mate, they are made in Japan and quite highly regarded there but hardly know outside of Japan
To me 1.6 is high build . Stay filler and primer territory
Meant spray filler