Arbor Press Dental Work!
Vložit
- čas přidán 14. 03. 2024
- Time to get the arbor press off the floor and sorted.
Stick around while we knock out a couple of its teeth and make some simple tooling!
-----
Music: Epic TV Theme - Audionautix - Věda a technologie
This Old Tony, you are by far my favorite CZcams channel. I do wish you would post more, but I understand that life and family come first. Just know that anytime you post something, you make a lot of people happy.❤
I couldn't agree more! Tony for president!
Yep I agree we need more tool time with Tony!! Fart jokes, squeaky toy sounds, sarcasm, dry humor. And the Easter eggs❤
Everytime he posts something it’s like poison in my veins
Can't rush genius
Tony for 2024
It's a good day when we get to watch a This Old Tony video
Yeah right! Today we got new videos from ToT, Inheritance Machining AND Electroboom!!
He saw inheritance machining posted and realized he would be replaced
@@gianlucatomasello9492 I run all 3 channels.
@@ThisOldTonyAnd Wintergatan too for sure. I saw that latch mech there
@@ThisOldTonywe all knew that @InheritanceMachining is really TOT I mean have you ever seen Tony's hands in the same place as inheritance machining?
My wife heard the squeal of a young girl and knew immediately that I had woken to a ToT video release. Thank you
“Oh look, I can now press things in an angle….” That was the best laugh I’ve had in months. Thank you for that.
I have that same press, which also lived on the floor. I only used it a couple of times a year until I got a stand for it. Now I use it twice a year.
I borrow my neighbor's semiannually.
😂👌🏻
Wow, you've virtually QUADRUPLED its use by building a stand! Those of us "extra space handicapped" people are envious
That's a 200% improvement :)
Really, the SAME press?
This Old Tony is now an official Arborist! You should plant the press out back in the Arbor-etum and see if you can grow some mini presses...or maybe breed it with a hydraulic press. That's where pnuematic presses come from. It's the old story of the boards & the beads 😛
It’s been done; they are called cy-press?
I would be impressed to also see some cress. But it requires a lot of spare thyme to do such a project...
Thanks This Oak Tony for the amazing video!
Thanks Dad.
lol "when 2 welds love each other very much..." haha
Oh dear!
The best thing about wire brushing with power tools is the tiny pieces of loose wire you will keep finding embedded in every piece of fabric you did or did not own at the time of the job being done. It always reminds you of the good times you and that wire brush had together🙂
My Dad was a lifelong machinist for Curtis Wright. He's since passed, but I wish he was still around to watch your videos and enjoy your sense of humor. I think of him every time I watch your channel.
Thank you!
So with it being my Dads birthday, and I was missing him something awful, I've been watching TOT all morning long. Like for the last 4 hours I've been watching my old favorites. This one pops up, and im scratching my head thinking how on earth did I miss this one? A TOT I've never seen? Wasn't till 3/4 of the way through, I realized it was just released.
What a great gift, Tony. Dad was a big fan.
I used to listen to the old videos while going to sleep.
TOT is an absolute treat
@@tk429...me to ;)
This Old Tony I get worried when you don’t post anything for ages, things go through my mind like may be he has welded him self to a project, may be misses Tony has cheaped out on the oil and you’ve rusted solid, perhaps he’s over modified his machines and they became sentient again but none of them have a finger that can upload a video please don’t scare me like this just post a screenshot once in while let me know your still turning stock into scrap
That 1 2 3 block trick with the pencil was worth the price of admission alone.
And no, it's not free because if you're not already subscribed to ThisOldTony then you're just like that kid in too many '90s TV shows that sneaks into the movie theaters through the fire escape. And you should feel bad until you subscribe!
But for real, thanks so much for another amazing video Tony. You're always an inspiration and few people on this planet have the talent to provide so many helpful tips in such an entertaining way. You're a true creative genius!
Drill a hole in a bit of wood at any angle you need repeatable holes.
I worked in a shop (brand Yellow...) with about 40 other guys...one whom we nicknamed "Launch master.". Every time he'd use the 150-ton hydraulic press for anything, his tooling setup would look like something from a Dr. Guess cartoon, and he refused to use the safety cage...the entire shop would take cover. Same guy who shot a piece of 1-1/8" grade 8 threaded rod THROUGH his tool box. Entertaining.
Your video saved me preemptively on buying the wrong arbor press 5 years ago. Thanks for the future tense reminder for me in the past.
2 month without a video. I WAS WORRIED ;)
My wife was so relieved when she saw the notification of your video.
Guest she was tired to see me crying in the tub hitting my head waiting for your video to come out. ;)
Happy to listen to you again.
😅
A TOT video AND an Inheritence Machining video on the same day?? The stars must be aligned!
I think they are the same person just TOT has taken over his body!
How ever that works
Hell yeah
Im just waitin for a day they interact
There's a Matthias Wandel video as well. Next thing you know there'll be a new Clickspring Antikythera episode!
@@iWonchan It would be like meeting the person who played you in a porn parody...
And it came on a Friday, so new video at cutting edge engineering Australia (big stuff) as well
Hats off to you sir, for regaining the same style and dad humor after several years of sadness (also of pruning tools videos). Glad to see you still have your old sense of humor. Welcome back!
The welding wire trick to help get welds square is something i learned from you a few years ago and has made my life way easier many times. Thank you for putting formerly tribal knowledge out for people like me learning things the hard way... But help is always nice when you can get it lol
I was about to post and ask what the purpose was for this. Makes sense. Thanks!
As a non-welding would-be welder, that trick only works for non to low force welds right? I mean if there is a gap between the subjects, so only the weld is filling the gap that would not be very load bearing compared to subjects being flat and then welded?
No, it's not like hot melt glue, the weld is similarly strong as the bits of metal it's joining. And, they physically become one piece because the two pieces being joined physically melt into the weld and together.
I'm sure there are specific combinations where it's notably weaker, cases where it's not permitted and even situations where the base metal is the weakest part of the bond, but generally, in most scenarios, just as strong with a gap or no gap.
It doesn't have any downwards force on it, it's only to keep the press from sliding off of the stand.
Tony welded the stand's post the same way.@@tubeonline629
Dang boy, CZcams gets awfully boring without some new TOT videos occasionally. Always a treat. Thank you for continuing to take the time to do this. God bless you and the family sir!
This wasn't boring, this was pressing.
Recently found this channel and watched every single video then felt empty until today. I love this old Tony
Always good for a chuckle, a groan, and a handful of learning moments! Thanks for bringing us along.
Can't wait for PART 2, where you mount the press to that nice yellow stand.
I thought that was going to be the big finale. Obviously he's going to squeeze a whole series out of it. Has he been taken over by Netflix?!
Wait... so it's not going to be a tensegrity press floating between the floor and ceiling?
Has to find the “right” place for it and not be in the way 363/365 days of the year.
I don't know exactly how to tell you this but..... I've never been more entertained by another man's hands. Except for maby Bob Ross. He is legend as well is TOT!
What, never had a bro job?
“Let’s put in some happy little welds…”
A new This Old Tony video made my Friday all that much better. Thanks for the video.
Always a pleasure watching TOT!
For tool holding, instead of a set screw, just put an o-ring on the shaft.
In my last job we had a tiny arbor press like thing to close watches after swapping the batteries.
It used the o-ring method since you had to swap the tools to fit the size of each watch and it was really convenient.
That's why my secondhand arbor press doesn't have a setscrew but has the hole in the bottom!
It's always a good day when ToT uploads. And a nice 30 minute video. Thank you
Always a pleasure! Thanks, This Old Tony!
We love you Tony. Thank you for everything
So in about half a decade, Wintergatan will discover a revolutionary usage for arbor presses
(this joke comes from a place of love)
😂👍
Please explain...
@@them0leisback Watch the latest and next to latest Wintergatan 👍
I quit watching wintergreen when I realized he was going to finish the mmx somewhere about 3 weeks after he dies and someone else takes over the project.
I'm wasting at least 6.25 hrs turning the shop arbor press into a ratcheting press on monday. It gets used prob 3 times a year. I'll charge time to the safety team so we're all good.
Tony, you are the GOAT!
Everybody at Boeing is Safety Team. No safety time for you!
You're the best ToT. You always bring a smile to my face and knowledge to my mind. Thanks.
Excellent ideas thanks. Will put on my list of "to do" for next week.
Happy to say that I was able to maintain my composure though most of this video.... but I lost it when you threw the angle drive attachment on the arbor. Comedic gold.
We all have our breaking points.
You just showed me my next arbor press mod! Mill off two teeth! I already did the hole for tooling. Mine lives on the floor, clamped to table when needed. That ratchet feature is going to get done.
As always an absolute pleasure to watch , laugh, learn and to dream of having the kind of workshop to let you do all the amazing things we see here. Thanks This Old Tony!
Best videography, best humor and now I know what that thing is that I inherited. Thank you.
Oh man. This Old Tony and Inheritance Machining videos on the same day? What a way to cap off the week.
@@GolfMike09 I don't weld, lathe, or engineer, and I still watch all three.
Today was already such a great day, pay day, Friday, steak at work, making brownies at home, had a great ham sub for dinner and now a new TOT video? This day cannot get any better
So entertaining. Just brilliant. Thank you for that many smiles 🙂🙂🙂🙂🙂🙂🙂
Brilliant as usual. Thank you!
I work on a lot of small pumps and the motors that drive them. I have a 1 ton manual arbor press. The “feel” it communicates is terrific.
I need to remove a couple teeth. As soon as you started to mention it I remembered it.
I am often at a bad position and probably would have never remembered on my own.
Thank you for the prod.
Great video, as always!
Something’s wrong here. There are over two hundred comments here, and even though the only substance I’ve greased my brain with is ethanol, I’m still the first one to catch that amazingly smooth pun at 16:25-“Is that redundant? I think all molly grease might be high [pressure]”.
Well played, sir, well played.
Thanks ToT. Your vids are always entertaining. Your humor is par-excellence.
A man that has all the talents in the world and uses them for good😁thank you ToT.
Missed ya buddy!
happy to see you again Tony!
You are the best learn stuff and have a giggle while learning, thank you
That's a great video Tony. I like the facts about the old style press versus hydraulic press.
Thank's a lot
Once in awhile This Old Tony graces us with the gift of another great video and our meager existence again has meaning. Also engagement equals algorithm points. Excellent production and content as always.
Its The same joy as waiting for a long off event knowing you have videos coming at some point, Thanks for the content, I can't tell you how many times in my life a ThisOldTony video made a ruff day so much better, Thanks again
Nice nut buster.
I love my old k.r. Wilson 50ton 2 speed hydraulic press with manual arbor function. Fantastic tool.
Love your info and your humor!!
My Friday got exponentially better!
i finally understand what you're supposed to use a 1-2-3 block for, thanks tony!
Yes they are the perfect stock for making a 0.5-1-1.5 block with that arbor press👌👌
It's always good to remind us the proper hours to utilize dial indicators. I appreciate it.
Still far and above the best entertainment on the internet! Thank you This Old Tony!
Only 15 seconds in and I'm already chuckling!
You never fsil to instruct and entertain at the same time. Thank you for your time and talents.
Interesting, practical, useful, added to my list. Thanks
Saturday morning, cappuccino and croissant for breakfast, watching TOT last video. What a great way of starting the day.
Thanks a lot Tony!
getting home from work to a new TOT is a really special feeling, Thanks Tony!
I watch a lot of CZcams channels....none of them excite me more than when I see yours pop up in my feed. Thanks for making it!
If you don’t already, add On Fire Welding to your subscriptions, he fixes da big boys toys and is an excellent watch👍
You and Watch Wes Work are my favorites by far! So educational and entertaining. Thank you!
Bloody excellent video, thanks for posting
I used to work at Santa Cruz Mountain Bikes as a frame assembler. Each bench had it's own small arbor press like that with its own tooling for carefully pressing bearings into links and frames. Very handy tool.
New Tony video! Perfect Friday!
These videos are like fine wine the delivery the editing and the humor.
Thanks Tony- some great ideas for my arbor press!
I used one of these in my company on an assembly line in 1989 We were still using it daily 2 years ago when we moved to automation. Must have operated multi-million times. And it was a similarly simple press as yours.
I get SO excited when I see a new This Old Tony video!!!
Thanks, Tony! Great content!
Thanks Tony, another great video 👍
You got a "Thumbs Up" just for the pistachio! It made me chuckle.
Nice. This a reward for a long work week.
So awesome to see how you mounted (not!) the press to the lovely new stand you built for it.
The subtlety of your videos is remarkably subtle. I'm glad I was watchin'!
Insurance gag was spot on and the rack alteration was genius. Thanks Tony.
"I could press stuff in at an angle." doubled me over with laughter! SO GREAT. Thank you! Man this video has me thinking about dragging my arbor press out from under the house. Curse you!
😅 agreed! Pressing stuff at an angle😅😅😅
Oh my god!!!😱😱😱 this old Tony video! Made my day🎉🎉
Probably the best TOT vidjao yet.
Tony. You are awesome. Thank you. 😀👍
So glad to see a tot video
Hooray a new video 🎉
Thanks Tony, keep em' coming. I'm going to be in the shop "fixin" my arbor press!
In the early 80s, I had an arbor press, just like yours, that I bought from McMaster or Grainger. It worked great for punching holes into many thousands of scrap circuit boards. TMI
What I really wanted to say was that I love your humor and your videos make me smile.
Thank you!
this old tony and inheritance machining videos on the same day!!!!!! im a happy man
I was just sitting down with my pizza, thinking of what to watch, and, BAM! ToT uploaded 14 seconds ago, like a dream, but reality.
Another excellent, humorous and informative video, as usual. Thank you
I like Tony's gimmick of getting, for lack of a better term, the lowest quality equipment and enhances it till the weaknesses are strong or are accounted for in the design. Real machinist ingenuity with the materials on hand.
Isn't arbor day in like April?
This is what I came to the comments for. Yes it’s in April.
Did you get it from Arbor Freight
I'm always looking forward to your videos. Thank you
Rachet mod made my day. I use mine exclusively for leather work. Rivets, punching slotted holes etc, and due to everything being a different length or thickness, I frequently end up in that dead torque zone. This will fix my issues 100%
Hi Old Tony, thanks, your videos are just great, technical content is too!
Good morning TOT.
This is a great video for ideas to add accessories to an arbor press.
Thanks for sharing.
Quality humor and info as usual, thanks Old Tony! :)
Congratulations!! Very clever!!
Finding a new TOT video brings on a level of happiness akin to a lottery win.
It just improves every aspect of your day.
Another great video from the Master of Machine Shop Educational Komedy! Always an informative treat....
Thanks Tony, always fun seeing a new video!
As always, just a great video. Nice to see you back Sr.
Whatever the topic, it always ends up as a great moment of entertainment. Many thanks old chap 😎