How a Turbocharger Disassembly Turbo Diesel Cleaning and Turbos Repair Informative Videos
Vložit
- čas přidán 29. 08. 2024
- How Turbo diesel cartridge replacement. How a turbocharger disassembly & turbo cleaning. Turbocharger cartridge replacement and turbo reassemble.
You can support Pakistani Trucker to watch more truck related interesting videos, by clicking the link below:
www.buymeacoff...
#Repair
As an European truckdriver, i have massive amount of respect for these guys.
Subscribed, keep up the good work
Thank you so much ❤️❤️
... me too , bravour craftmenship ... ! Grets from Europe to Pakistan
they are the real deal. After watching these guys working, my working efficiency increased because they don't say how good they are , they're proving it by action
He is the only mechanic in the entire country that doesn’t work on the floor
No i co że nie na podłodze, jak wszystkie uszczelki na silikon pokleił. W tym gorącą stronę z kolektorem. Zaraz będą przedmuchy spalin spod kolektora...
Don't worry very soon you people in America going be working on the ground too.
What's wrong with the floor it carries you through day and night without complaint
here we dont use gloves, we use wour skin as gloves to wash turbo with gasoline...and we love it, its a good antiviral liquid.
@@nazicass377
🇬🇧Don't think they have ratchets either , or a speedbrace 🇬🇧
No words needed, no instructions given. Every man doing his own thing, in perfect harmony!!!
I noticed that too.
I can't believe it.
He is standing up.
And using a work bench.
It's a miracle.
Every viedo they work
On the ground in the dirt.
A new era start
Some guys dont really care some go out and get better Equipment
@Runa khatun We know that they are poor, we dont laugh at them, but it look like table is worth a car
Stop camplaining about these guy where they working on floor or an bench if you fell sorry than send them money so they can buy stuff fucking camplaining for nothing you watch free they video fucking ideats
William
🇬🇧 That's an old school workbench ,made by a mechanic , no snap on here 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏 🇬🇧
This is one way of saving the environment… recycling instead of throwing out the whole part.
I love watching you guys repairing parts instead of buying new, great recycling for the world, keep it coming guys, thanks.
Thank you so much friend !
I was shocked to see him working on a real bench!! Top Pakistani shop I’m sure Evolution at its finest
🤣😄👍
exactly😁
It is cultural way of working on ground it has nothing to do with poor or rich
Finally! Glad to see a work table in your videos 👍👍
😍❤️👍
Hahaha, good one.
I live in the UK and worked as a mechanic. No way would we do it like those boys. This is the problem today, just technicians not mechanics. These men are awesome.
Thank you so much for your comments ❤️
Oh Wow! Nice to see a work bench, vise, proper tools and a decent clean environment. And you even brought your pet Bird to work.
Thanks 😍❤️👍
Rooster at workbench!!!! Was meant for lunch?
We are used to see this guys in the floor working in the dirt this 2 guys have the right work environment
Thinking the same thing, no more squatting
The bird is the supervisor.
3 brothers working in close proximity and no cursing, or arguing - well done! :)
У меня доверия больше к этим мужикам, чем официалом👍🏻
The rooster is telling them it's break time!!!!!!
😁
Дружище, посмотри пожалуйста как забивает катридж, - он стал на перекос(мог повредить крыльчатку)
You can tell they have done this 100x before. No guess or thinking, they just know what needs to be done. Impressive
im okay with the disassembly but the assembly is kinda bad ...the orange o ring is not seated properly notice how twisted it is also soft hammers needs to be used here with assembly to minimize the chances of cracking , its also funny he used gasket maker on a metal gasket designed to take high temperatures unlike that blue lotion he just rubbed thinking that he is doing him a favor by adding it looool (gasket maker)
These guys are very organized.
They've obviously done this many times before. 👍
Малой молодец!!!! С детства учится ремонту!!!! Голодным не останется!!!
Галодным не останется куры под сталом живут
Gotta say I am really impressed... Can tell he has been at it a long time and could probably throw a rebuild kit in a turbo while he slept.
First time I've seen these guys working on a proper bench. That young fellow is a good apprentice, he'll be taking over the work soon.
It's good to watch these folks work, it's kind of like what it was here back when I was a young'un helping my old Dad fixing cars in his shed.
Couple of shops have a table, some don't do on table.
Thanks for your comments & sharing your experience 👍👍❤️❤️
Professional mechanic with a apprentice working at a bench with proper tools. 👏👏👏 Excellent job.
Thanks for your comments ❤️
Впервые вижу у них РАБОЧИЙ СТОЛ!!!
Ну да, обычно они у них вкопаны в землю на уровне пола..
Ага,обычно всё делают на полу. 😁
ну да обычно все в песке делают ))
после сборки глуша блестел изнутри от пескоструя ))
Это ремонт турбин, серьёзное производство. Без европейских технологий никуда
in Russia the craftsmen will take more money for the work done than the turbine itself,
Thanks for sharing; excellent work, fun to watch these experienced mechanics together with all the helpers and junior mechanics! in training. You guys seem to be really enjoying yourselves. Keep up the excellent work. I look forward to the next video. Thanks from Canada.
Robert Baker thank you for the comments ❤️❤️
Даже есть личный выдавливатель - подаватель герметика. Сильно!
Все ремонтируют
Что можно и что нельзя. И наверное все работает.
Here in the UK reconditioned turbos are very expensive but new cores can be had at a very fair price. They are fairly easy to take apart and do yourself similar to this video but most people seem to be afraid of this. They normally fail due to blocked oil lines due to lack of proper overall engine servicing.
Чудо герметик.и на холодную и на горячую и куда угодно
Скорее всего это ABBRO Gray 999. Только вот в инструкции написано, что нужно после намазывания 10 минут подождать, а потом собирать конструкцию. А они намазали и в путь! Подсос воздуха неизбежен. Точнее утечка.
@@robertpaulson9231 перматекс фирма герметика
@@user-rm1ri9lq4v там пох, как называется, технология явно нарушена))
И на прокладку ….
Походу майонезом мажут.
С большой сделал 2 маленькие турбины ну типа битурбо теперь.... И все с помощью зубной пасты...
Сила пальца☝️! После работы очень удобно шершавым пальцем жене волосы на ногах приглаживать или усы 🤗
I think it the first table I’ve seen them use!! It’s usually always on the ground.
Right some of them use table & others don't its ok they said...
Lol I was thinking the same thing
True and safety sandals always
the table was only for yT
Lol.. same here 🤘
the 2 men working on the turbo just work together so well...they already know the next move...wish we could work like that in the usa...we use to but not anymore..great vid
Thank you so much for your comments 😍❤️🇵🇰
I need a bigger steel hammer.
I was always taught that a brass hammer should be used on cast iron so as to not crack it.
*But NO!*
A BIG STEEL HAMMER IS COMPULSORY
Thanks guys, I learned so much from you 🤩
😊👍❤️
You can see a lot of experience in the renovation of turbochargers. Young boys are already learning this job. That's good because practice makes perfect. I first studied with a blacksmith, Mr. Józef. He could repair wheels, carts and perform other blacksmith and locksmith work on large drills. Congratulations 😄.
Thank you 😀.
I miss being able to do this. I like this shop. More of these guys please
😍❤️❤️
It's great stuff; Growing up and helping my mechanic Dad got me into cars, and gave me the inclination to become a mechanical designer...
Lots of respect for these fellows getting the job done with the most basic tools and equipment. Most Americans can't even work on their own lawnmower.
😍❤️
like watching these guys work they manage and keep things running with there, we can fix it attitude... awesome
все , буду открывать автосервис по турбинам 😃 я уже все знаю
Силиконовым герметиком мазать соединение где темпер мае несколько тысяч градусов..... Щедеврально. Паки так и в Японии машины делают. На отыбись.
То зубная паста для притирки 🏁🇺🇦
Great teamwork and no egos!!!!!!!!!!!
Герметик это мелочи. Они после того как крыльчатки с вала сняли, не отбалансировали заново вал с крыльчатками заново. Без балансировки можно выкидывать эту турбину - никакого толку с нее не будет.
@@alexandrkushnir5728 так они меняли целиком новый картридж, а разборку провели для камеры ну или как будто понимают что делают
The first guy standing up to work. With a tool box. And a clean(able) surface! I'm impressed. I wonder what the function of the rooster in the cage is. (And to the young man learning the trade, Kudos.)
Young guy learning right ! they also love birds & keep in their shop ❤️️
Rooster is most likely going to be the dinner!
Amazing how these guys work on things with BARE hands with quality. I should call this TOP PAY ,just saying, ✌️ Very inspiring video. Thank you for sharing!
Thank you so much !
@@PakistaniTrucker You're so welcome. If only you're my neighbor, I would hire you to fix my car problem, lol 😂
Отдельный кайф- читать коменты.
It's amazing there work is like having a good time they know what they doing and more than one hand working on the same things and the chickens in the back yard easy life they making aliven
Read "Zen and the art of Motorcycle Maintenance" and you will get an idea as to what is going on in the man's mind, surrounded by peace and quiet.
If anyone wants a great mechanic, this is where to find one, as long as they're willing to unlearn, and relearn quite a few things. These dudes + and education, and proper environment = a better world imo.
Great respect, these guys hardly even talk and work with old tools but know exactly what they are doing
😍❤️❤️❤️
Красавцы , с помощью молотка, без зубила, и помощью какой то матери, отремонтировали такой сложный узел как турбина.
Особенно горячая часть на герметик воооообще огонь
Разбирали одну турбину ска, собрали другую, фокусники!!!!!
Той хана было.... 😁
@@user-xm7fd5wq1y она рядом лежало,видать запчастей дожидался.
Прикол,замыли турбину до такой степени,что из грузовой превратилась в легковую,жесть
I'm definitely gonna hit up Abdollah Mohammed turbos from now on. They know their stuff. 💯
never use silicone on a turbo, it will clog up and the turbo needs to rebuild again.
Yeah.. unfortunately they don't know it..
It's different, that kind is for high temperature
@@atlasflame2510 didn't look like it, just regular.
finally a working bench!!!
Лучше с ключами чем оружие Молодцы
Я уж было подумал, что они сейчас крыльчатку новую на коленке выточат, а тут все так просто....
)))
Эта турбина не будет работать. После того как крыльчатку с вала снял, обратно ее точно так же не поставишь. Балансировать надо на станке специальном. Иначе никакого толку с этой турбины не будет. Она выть будет очень громко и не будет создавать рабочего давления.
@@alexandrkushnir5728 у них охуенные станки, балансировка на глаз
Хуже всего когда лопасти отлитают от крыльчатки и все машина встала
@@alexandrkushnir5728 это пакистан. И если работать не будет к ним ходить перестанут. А у них щеки пухлые. Значит и заказы есть
2 different turbos being shown? Why show a different turbo being assembled than what was disassembled?
Maybe they needed to order some parts for the one that was disassembled. If that is what happened, the cameraman may not have had the time to wait for the part(s) to come in.
They probably broke it.
They did disassemble truck turbo and later assembled passenger car turbo using brand new Toyota turbo cartridge. You can see first turbo parts on the table in the end of the video.
So you can learn both in the same video, these guys are so efficient they even teach you twice as much as everyone else.... All in the same video!!!
Besides, putting it back together can be seen by playing the video in reverse.
People like this are doing a better job than i pro i enjoy those videos sometimes
Thank you so much 😍❤️❤️👍🇵🇰
Love you’re work ,,, like to see kids learning the trade ..thanks for sharing with us,,,👍🏼🙏🏻🙏🏻🙏🏻🙏🏻
That always cracks me up. Always several boys about learning, that's the way it use to be.
У элиты Пакистанского авторемонта есть стол с тисками, и чинят они турбины!
ПРО БАЛАНСИРОВКУ ВАЛА ДУМАЮ ОНИ НЕ СЛЫШАЛИ !
2 Things that I liked the crowing of the roosters and how fantastic they work. Very laborious. I'm going to hire them.
i stumbled on here and said what the heck ,,,,i did the same thing you guys are doing and i became a good tech ,,,,bless all of you for your courage .
❤️❤️
И самым большим шиком щитаеться после манипуляции с механизмом бросить его в сторону или бросить чем работал в сторону.
Это указывает на то, что работают "профессионалы".. для нас эта культура не досягаема, т.к эту ветвь развития мы прошли век назад.
Silence in motion and work in progress ... well done. The kid in the green hat will someday be the ‘Turbo Master’.
Yep, kid is learning 😊❤️
Кинуть крыльчатку на металлический стол? Да похуй мы же герметиком подмажем....
Смотрите внимательно! Картридж новый ,крыльчатку в помойку, так как у них песка много ,да и от работы крыльчатка зачастую задевает улиту и снашивается неравномерно ,потому по любому ее в хлам.Видео о том как сменить картридж , собственно ничего такого,а герметиком намазал потому что ценники как на картридж так и на прокладки жаропрочные весьма огого.
А нахрен он нужен? Всё равно
картридж будет новый.
Плоскость горячей части не удосужились хотя бы отторцевать на наждачке, уложенной на ровную плиту, намазали герметик на грязь. Не проверили люфты в клапане, как был нагар внутри, так и оставили, потом недодув будет
На верстаке и в тесках работают , это элита ремонтников работает , только зачем на турбине использовать герметик особенно на горячей части .
Керамический герметик.
@@shato1832 какая разница какой герметик. По герметику сразу виден уровень ремонта. Чем его больше, тем ниже уровень. Герметик чтобы до "дома" доехать, а не мотор на нем собирать.
@@user-6x6truck Так это и не мотор.Для них это вентилятор😁
герметика много кладет. он просто выдавится в стороны и в саму трубку
@@shato1832 нельзя.выдавит внутрь, застынет и эти камни отколяться попадут в крыльчатку
Impressive how fast it has been disassembled. They are professionals with a lot of experience.
I always like how the kids paying attention and learning from the experienced professionals.
Thank you so much for watching & comments 😍❤️
this is so entertaining...hard working people...very smart and confident...my respects 👏👏👏
Thank you so much !
It’s a miracle, that turbo shrunk after it was repaired!
Yeah I think those are two different sets of turbos. Cause the first one is definitely bigger with certain ports and toward the end of the video the ports are different too. Nice observation.
You're right. They show the turbo they finished with, then switch to beefy Garrett turbo disassembly, then finish of showing the reassembly of the turbo they started with. I think something happened to their video, they might have lost the footage.
They work so well. The young fella cleaning up. So many shops there is garbage everywhere. These gentlemen take pride in their shop which reflects in pride in their work. Thank you for sharing. Nice work!
Thank you so much ❤️
Чётко. Разобрал одну, собрал другую.
За тобой выехали
@@user-6x6truck ++))
These guys are the real deal skilled in their craft. Not like in the West with fancy gadgets!
Молодцы ребята 👍
Самое главное, у всех умные лица😁
Всё бы ни чего, вот только турбокомпрессоры собираются БЕЗ герметика!!!
@@pro100ept
Дружище, ты просто не разбираешься в турбинах😁.
@@user-nn2yn9nb4k 😉
@@user-nn2yn9nb4k за то, клиенты постоянные)))
In france : Just buy a new one .
... Me : fix everything
Good job pakistani
I’m enjoying your channel from California!!!!!
Mike Moore thank you so much ❤️
Unbelievable unbelievable unbelievable
Pakistan zindabad Pakistan zindabad
I love my ppl and their working class abilities
Thank you so much Pakistan hamesha ZINDAABAD 🇵🇰❤️❤️
The Garrett air research service guys would faint looking at this. Hardwork though. When a hammer is the only tool you have, every problem appears to be a nail.
And they nailed it 😂
@@muh.ferdiansyah7989 True that. Much respects for the hardwork. Elsewhere these repairs could cost a bomb. ✊✊✊✊
Jaja
High tech and I do mean high the amount of precision shown is Third to none
But we dont have machine to calibrate the turbo so it must be calibrated by the nail itself.
For the love of Allah, somebody send those guys some ratchets
Nothing like repairing a turbo and taking care of the chickens at the same time team work
I admire your work. repair engine parts with very few tools, frankly hat
Thank you so much 😍❤️❤️
Another great vid. Thanks for posting. These guys just " get it done "
To say I'm impressed is an understatement
Why show disassembly of a twin scroll turbo charger, and show a different turbo being assembled.
If you play the video in reverse, you get the disassembly of a single scroll and the assembly of a twin scroll.
All in the same video..!!
Finally a damn work bench.... But then they go back to washing parts on the ground
Actually table was full of stuff 😂👍
Pakistanis are really hardworking.. just imagine the world wherein both Indians and Pakistanis live like brothers and sisters.. oh, we could have ruled the Asia!! But in reality its different.. Sigh.. anyways, good luck to both Indians and Pakistanis..
Solid work, anyone else notice that the turbo that was taken apart in the beginning was a completely different turbo than the one that went back together lol
SAME HOUSING...NEW INTERNALS...
Fico admirando o trabalho desses reparadores, como são criativos e eficientes. Parabéns pelo vídeo. Abraços aos colegas mecânicos aí.
Gracias Muchos, from Pakistan
Wow, This man actually has a table... and tools!
This must be the Taj Mahal of truck repair shops in Pakistan?
😂
Right this workshop is good among others 👍❤️
Imagine if they had a set of Dewalt impacts and new snap-on tools along with a good Quincy air compressor and a proper building. They have the skills, drive and determination but all the wrong tools.
And yet they still get the job done with no snap on tools.
Real Mechanics use their skills is never the tools it is always the skills and knowledge just ask the old timers! The old timers didn't need much and they created amazing pieces of art with a carpentry hammer a dolly and lead lmao
Despite the fancy doodads..E TOOLS... DRILLS..these MEN...no soy boys ..are the Mothers of Necessity so to speak..they take what we in AMERICA would buy KNEW or Refurbed......using the hands and brains and restoration of items many can't afford to replace...so rebuild on SITE...cool to Watch...see the tyre fix one. It's a real patch !!
It was un beliavable this guy from pakistan so skillfull ...salute🇧🇳
😍❤️
Amazing work as usual, however silicone on hot side of turbo is a no no and pointless lol
Probably going to guess it is high temp silicone. I don't think it's there first rodeo and they are rebuilding this turbo to redo the job in few.
Another good video from Pakistan 🇵🇰.
Thank you
У пакистанцев верстак? Чтото новое!)
Заметь, половину работы стоя делают!
I don't know a garage in the UK that wouldn't bin it and replace the lot. How can you give these guys a thumbs down, there brilliant 👏👏👏
Uk is shiet when it's comes to auto repairs, machines here just want to change everything on your car even its needed or not.
да после такого ремонта плюс 500 лошадей к стоку и всё таки главный инструмент молотоки герметик осталось только им поршни намазать да и глушитель заодно.
I love to watch these boys work. We replace and they rebuild love it
those safety sandals lmfao. 1 dropped part, no more toes
Its more like prevention is better than the cure 😂
🤣🤣😅😅
This is pure mechanic best ever.
Многие комментаторы,да и я в том числе, в жизни бы не полезли такую турбину крутить. А парни молодцы- не бояться.На коленке, через .опу,без инструмента.Результат не сильно важен-главное процесс!
Ну в общем то да.😁
А лица погляди работают спецы
А что там сложного поменять картредж ?
@@user-ci3vf7df4j Если есть опыт ремонта турбин на коленке, возможно и ничего сложного нет.Я вот например не знаю, про какой картрИдж вы говорите.
@@Fantik22 картридж в принтере
Say what you will, but these chaps get the work done. Most people here wish they can do this at home and have their vehicles back on the cheap.
0:25 How come he can knock that clip off and lands right on the flange. Mine always launches into low earth orbit, or the deepest crack around. No fair.
Practice my friend
Lot of Practice
These guys are my heroes because they have a workbench.
everyone starts out as silicone assistant
Love the team work. Greetings from Dundalk Ireland 🇮🇪....
Thank you so much !
The Rooster keeps the track of the time. А петух отсчитывает время.
lol
Hahaha I was on the floor pissing myself
American Mechanic's would be crying working "in these conditions". These guys will be er be unemployed. Enjoyable to watch.
Here’s the good thing about this mechanic his the only who’s not working on the floor but actually have a functional tool box which is plus in that country but still lacking of the professional tools required but homemade are always much better
Man we make AK 47 by hand in pakistan 🇵🇰.
@@pathfinder5794 even much better an Ak 47 made by hand put 10 on my order anytime
@@andresquinonezramirez9373 I am not joking mate I can send you the video of hand made guns of Pakistan.
Just search in you tube, Darra made AK 47 and you will find many videos of hand made
AK 47s.
@@pathfinder5794 ok
Very clever and skilled artisan engineers. I dread to think what this work would cost here in the U.K.