Car Fix - Fiat Punto MK2 Sun Visor Fix / Repair
Vložit
- čas přidán 10. 06. 2015
- Hey guys, here is how i fix my Fiat Punto MK2 loose Sun Visor.
Very simple and fast.
Any questions feel free to ask on comments.
Enjoy.
Parts/Tools Shopping List:
(US/World):
Craft Knife - tinyurl.com/zds7e65
Bolt and Nut - tinyurl.com/hjvmxgz
Cutting Disk - tinyurl.com/he8gwnd
Abrasive Stone - tinyurl.com/zpcfdjl
Contact Glue Spray - tinyurl.com/z44hdnc
(UK):
Craft Knife - tinyurl.com/jmlb2qm
Bolt and Nut - tinyurl.com/zrryoyp
Cutting Disk - tinyurl.com/jun57zl
Abrasive Stone - tinyurl.com/jjegc38
Contact Glue Spray - tinyurl.com/z65te3g
(Spain):
Craft Knife - tinyurl.com/homb6gr
Bolt and Nut - tinyurl.com/jv9p5dl
Cutting Disk - tinyurl.com/zbgazf3
Abrasive Stone - tinyurl.com/hmo94sj
Contact Glue Spray - tinyurl.com/hmo94sj
(Italy):
Craft Knife - tinyurl.com/hgno97r
Bolt and Nut - tinyurl.com/j35c2nr
Cutting Disk - tinyurl.com/zo632br
Abrasive Stone - tinyurl.com/hvgddhg
Contact Glue Spray - tinyurl.com/hvgddhg
Português:
Pessoal vejam ai a reparação de uma pala de Fiat Punto MK2.
Liguem as legendas, estão em Português.
Subscribe us:
/ @houditv - Auta a dopravní prostředky
Just fixed mine using your tutorial. Thanks a lot mate.
Your welcome my friend, I'm happy that I could help you to fix it. Wish you the best. Cheers
Thank you for the sharing which comes at the right time👌, since I am facing the same problem.
Can someone please tell what is this 'broken part' called ?
Have a nice day. 🌸💮🏵
Thanks for watching, i think the part is called "spring" but i don't think is possible to find it in stores. If you find it please tell us where. 🙏 Cheers.
For those who have problems with drilling that piece of steel. Use a Cobalt HSS drill bit. Thanks for the tutorial, it is very useful.
Thanks a lot for your tip ;)
Really useful
Cheers
Thanks for the hint.
I bought for that purpose a set of HSS Co but..still can't make the hole. I paid about 30€ at a professional store for a 1-10 mm set so i think Is not a scam. I pushed hard and used lubricant but after many tries only a 0.1 mm scratch is the result. Drill bit is fine, i can't see any visibile damage and the sharpening is still good to the touch.
Anything helps. Thank you.
You need to use a bench drill, it took long to make the hole, if you can try to heat the piece and then drill it. You need to drill it like 10min,its a very hard piece of metal. Hope it helps, then please say if it worked for you.
@@houditv I'm very grateful. Thanks!
I don't have a bench drill, I'm using a sort of vise. My uncle has all the DIY things, if I fail following your hints I will go in his garage.
At work
Im here for help, any help you need feel free for ask. Cheers 👍
thanks for the video/tutorial, very easy to follow - just fixed mine at a cost of £3:00 and didn't take long at all.
+Andi danks Thank you so much for your comment.
I'm really happy seeing that this video is usefull to help people.
Cheers
great fixed mine too
+Alessia Grottola Thank you so much for your comment.
Im very happy that it could help you ;)
Cheers
this actually worked, thank you sir
No, no, my friend, thank you so much for watching the video, I'm very happy that it could help you in some way. 👍 Cheers my friend
Thank you very much for this tutorial!
You're welcome my friend, thank you for watching 👍
The best tutorial video.
OMG!! Thank you so much my friend, it makes me very happy that I could help you. Thanks for watching and thanks for the comment. 🙏👍
@@houditv i have same problem in my Hyundai Elantra but the other tutorial nothing good,thanks again
Didn't know the Elantra had the same system. I'm happy that it helped you. Thank you my friend. Cheers
same parts and same failure with Alfa Romeo 156 visor. Making repairs now using this video. Thank you!
Your Welcome friend, hope it will be useful.
Try make the hole a lil more up than i did, it makes it stronger.
Send a comment if u get it done good.
Cheers
nope... didn't work. should've drilled a hole closer to the loop I think. It wasn't holding strong and visor moved too freely. Just bought a set of new visors as result. Maybe visor for 156 is heavier?
So sorry about it :(
Try bend a little the iron parts and/or put a little of tape on the plastic mount. It will tight a little.
I never saw one visor from 156, but if ill saw one ill send you a massage.
Cheers
Hi,
I had the same problem with driver's side sun visor on my Alfa 156 and finally I've managed to fix it with 100% success. The steps are the following:
1. I've drilled the hole as close as possible under the loop. (use the proper drill otherwise it is a nightmare to drill it).
2. I've put also 3 zip ties in order to get the proper friction as mention by Trevor (the fix by itself is not enough to hold the visor and don't waste your time by using electric or teflon tape).
Thanks for the tips Nikos ;)
If you made a video of it post it here.
Cheers
almost the same sistem on my megane mk 1. Thanks for the tutorial
Thanks a lot my friend, its been a pleasure to help. ;)
Where are you teached to cut your hands?
We always cut away from the hands!
Thank you!
Your welcome my friend. I'm happy that it was useful for you. ;)
Thanks for your comment.
Cheers
Blz...usa um arrebite, cola com cola de sapateiro e outra não mostrou como encaixar a peça do suporte....
Thank you.
Your welcome my friend, thank you for watching 👍
Goooooooooood❤
Obrigado amigo
👍
somebody please show this to fiat engineers
Yeah, they made an awful job with this sun visors...
They're terrible, they get brittle with age and with weather conditions and the minute you use them, crack.
On mine both the metal and the plastic that clips in broke.
I just replaced it in the end.
That's true, they are really bad made.
@@houditv Italian craftsmanship at its finest 😁
Yeah, they have good things and some bad things 😅
Showww
Obrigado my friend 👍
1000 likes🖒
Thanks a lot Gil Jr. Muito Obrigado ;)
Graças a vc eu e mais alguns não tivemos que ser roubados por compra (150 a 200 reais o par) coisas tão simples com preços estupidamente altos nesse país que trabalhamos pra sustentar políticos
No meu país é igual :)
Abraço
Maybe no drilling is needed. You could possibly wrap a few windings of barbwire arround the wings, instead of a screw to hold them together. I'm going to try.
Its a possibility, try to see how it works, and then please say me, thanks for watching my friend.
@@houditv Years ago I tried with the screw just like you did, it did not hold the visor strong enough. I ended up using the spring of the passenger side. Now that spring is broken lol.
Yesterday I used a wire instead in hopes to keep the halves tighter together. The result was the same as with the screw.
If you're interested, the wire was from a guitar (the outer wounded wire) and then hold in place with regular tape (scotch).
What now more or less works is adding two pieces of ty-wrap into the hole to tighten up.
Hope it helps someone.
@@BrainHurricanes nice, thanks so much for sharing my friend, next time i will try your hack.