Thank you for uploading this. I have a Mitsubishi Outlander 2006 that I need to replace this bushing and I was unable to find anything close that showed what to do. I understand that the Lancer and Outlander are diffirent but this still gives a good idea of what to expect. What tool number did you use to press out the old bearing and fit the new one? MB991444?
My Biggest Cup extractor was 80/90 in my Set.It needs to be 82mm .I Took whole Arm off releasing handbrake cable etc and use a Press for the new bearing cause didnt have right cup size. Where did you get your xtractor.I Pressed in Genuine Mitsubishi bushes 80 euro each and they have Failed after 5months.
He has done a mistake. The bushing must be placed with the "I" profile inside upwards(2:48) instead of forward direction (5:18).
This guy must be too cool to reply to any comments on his nifty video lol still added it to my liked vids though
Thank you for uploading this. I have a Mitsubishi Outlander 2006 that I need to replace this bushing and I was unable to find anything close that showed what to do. I understand that the Lancer and Outlander are diffirent but this still gives a good idea of what to expect. What tool number did you use to press out the old bearing and fit the new one? MB991444?
can you send a link for the tool you are using please !!!
What Size of Cup did you you use to extract the Bushing(Has to be 82mm or more?
My Biggest Cup extractor was 80/90 in my Set.It needs to be 82mm .I Took whole Arm off releasing handbrake cable etc and use a Press for the new bearing cause didnt have right cup size. Where did you get your xtractor.I Pressed in Genuine Mitsubishi bushes 80 euro each and they have Failed after 5months.
What is the part number or name for the bushing you replaced i have a Lancer 2002 4G18
Is that a press and pull sleeve kit you’re using?
My car was in a car crash I have to replace the whole trail arm but I don't know how to remove all the cables and lines☹
I have a 2004 Lancer and they told me I need bushings and the whole trailing arm replaced, but it shows no symptoms can that be right. ?
U9uuu890uyyyu999ytuyyyt061
Aaa8a
What is the part number for the bushing?? Please i need it
4120A001
cod lik