Lancer Fix 23 | FL Bearing, FR Axle
Vložit
- čas přidán 27. 07. 2024
- NOTE!! Use long nose pliers to take out the snap ring! It will be much easier. Here: goo.gl/4SZosj
Lancer Fix Playlist bit.ly/2JQkmfC
---
🌐 Website www.darkdragonwing.com
---
0:00 Intro
0:52 Bearing
7:17 Axle
---
This is a blue 2003 Mitsubishi Lancer ES 2.0L 4G94 SOHC AUTO FWD.
---
Front Wheel Bearing ebay.to/3jRiSBM amzn.to/2KFoU5L
Front Wheel Bearing Retainer ebay.to/3dTVYpM
Front Axles ebay.to/3qUJXWn amzn.to/3dS52vp
---
1. change front left bearing, hub, and retaining ring เปลี่ยนลูกปืน
2. change front right axle เปลี่ยนเพลาขับ
Axle nut: 31.75 - 32mm or 1-1/4" Socket (1/2" drive)
---
Mods on this car:
*Red calipers, red drums, silver rotors
*Security alarm CrimeStopper SP-400 with the engine start system
*Trunk release kit
*GENUINE A/C heater air controller gears kit
*Dual XDM7615 Stereo
*STATIC SILVER RIM By LIQUID METAL WHEELS 17"x7" Rims, 205/40R17 XL 84W Tires
---
⚠️ Disclosure: This section contains affiliate links to products. We may receive a commission for purchases made through these links. - Auta a dopravní prostředky
Front Wheel Bearing
eBay goo.gl/eXizdV
Front Wheel Bearing Retainer
eBay goo.gl/xzbuoT
Front Axles
eBay goo.gl/aE0sZQ
Best way to fill the transmission oil is on level ground with the engine running and the transmission in neutral
this man deserves a medal for hardwork and commitment!
I love how've you condensed... what, like 6+ hours of work over at least two days into a ten minute video? Definitely makes it look easy!
Excellent mechcanic skills,bro......
Your lancer will work more 20 years with such a great maintenance condition. All parts are new NOW 🇯🇵🇯🇵🔥🔥🔥
Great hardworking person
Hey, great video. I'm an auto mechanic and can appreciate the effort. One thing though, remember to check transmission fluid while the engine is running. You won't get an accurate reading with the car off.
oh i see
cheers
You're most welcome.
So patient and humble. Just subbed. Keep the videos coming especially on Mitsubishi lancers. Thanks
Wow! That ring was a nightmare! I tried your method all morning, and could not do it. I finally hammered the clip into the top groove, c-clamped a piece of wood over about 1/3 of the clip with the notched ends exposed.Tapped one end into the groove; tapped the other end, and it went in like a magic trick. Your video showed me that it could be done. I lost how many times that clip sprang out like a rocket. After all this, the same noise is coming out of the drivers side. I replaced a good wheel bearing.
+tim prater yay finally. But it did not fix the problem you were having?
Correct, same thumping noise from that side. I'll just drive it until whatever it is gets looser, and I can find it. Good Lord, I got to find a tool for that clip! I don't want do that again.
tim prater
It could be the strut or tie-rods or the lower control arm joint
Nice work man
love this grind sound
Good video, informative and well shot. I have a 03 lancer 5 speed.
love your vids
Very informative video. I learned of some new tools I will need to do the job! Thanks!
cheers!
Hi I always look on you CZcams channel with pleasure. Greetings from the Netherlands
Nice vid, thx for sharing.
nice work bro
cool stuff bro.
Dude you awsome man
Thanks for Sharing man!!!
Your car looking good
good job man,
nice vid!
ขอบคุณมุมช่างดีๆที่สอนให้ครับ
ฉัตร ครับ ครับผม
Good job :)
เก่งมากๆน้องชายสู้ๆ
Dude you can literally make a video of you bullshiting us and I'll still be interested. Something of you makes me enjoy watching your videos thumbs-up :DDDDD
haha :D Thanks, cheers!
พี่ นี้ก่ง มากเลยนะ พูด ภาษาไทย ได้ เเล้วยัง เอากีฬา อย่าตก้อ มาเล่นให้ดูด้วยงะ เจ๋มากเลย
@darkdragonwing Did you have to use wheel seals ? I am getting ready to replace my bearings on my mirage, wanted to know if they need the wheel seals or not.
Thanks for the great videos friend, really enjoy the mirage ones ! :)
Mayor Fuglycool
Nice man, Subcribed!, saw ur RC vids also.. cool to watch. From LA/California
cheers
excellent!!!
MUITO BOM!
You're suppose to check the transmission fluid with the car in neutral and running. You overfilled the transmission, which could cause issues in the future..
ขอบคุณมากครับ ผมชอบรถมาก ใช้งานอยู่ 3 คัน กำลังไปลงเรียนสารพัดช่างเพราะชอบครับ
มีประโยชน์มาก ครับ
Hi Thx for Your video's it's Really Nice
jone cena CHeers
i wish u lived in sf...so i can hire u to replace parts on my car than rip off shops
es primera ves que veo estos videos yo también tengo un lancer 2002 soy de panamá y me ahn ayudado muchísimo ya que nesecito saber todo lo relacionado sobre estoy lancer exelente explicación sobre la mecánica aunque no se ingles solo español
Hellooo From Mexico! I Have a Same Lancer !
I really love all your videos about mirage and specially lancer cause I have lancer 02 please upgrade more videos for your lancer fans pleaseee. Thanksss
Thanks, I will do more Lancer for sure. cheers
nice video man. i need to ask one thing, these models have the same fr axle. because i have a lancer 1.6 4G18 SOCH 2002 and the fr axle is broken. greetings from chile.
nice job.
U should probably do a honda civic fix
Muy buenos los videos
Good video thx for the share! So after connecting the McPherson back to the spindle, were the bolts able to line back up pretty easily for correct camber?
Joel Bargas Yes. But alignment after this kind of job is recommended.
Smart :D
THANKS FOR A GREAT VIDEO IM FROM BAYAMON, PUERTO RICO IT REALY SAVE ME A LOT OF TIME TO THE MECHANIC I HAVE A MITSUBISHI LANCER ES 2006 AND IM WAITING FOR A TIE ROD END GRACIAS UN MONTON
first of all love the videos, Now can I give you a few tips ........ " NEVER " spray your brake discs with paint, it contaminates your brake pads, and will cause sqeeking and bad brakes, and always put copper grease on the back of the new pads when installing. And when changing the oil, fill your new oil filter with oil.
sam Leigh guess what it's his car and he can do what he wants
What tools did you use for those I have that problem and might as well fix the whole axel from both sides
Excellent work I love very Chglk
ชอบมากครับ ขอนแก่น ไทยแลนด
Hey what's going on Maki appreciate the info on the O2 sensor that work out
Hey what's up my friend I hope that you can help me please ,,What kind of oil can I put in my manual transmission, and where can I put it?
Nice
Has cambiado el aceite de la transmisión que aceite usas? Gracias
새해복많이받아요
Hey Maki by the way those aluminum rims what they come off oh😊 thanks brother
Your smart
Everything I go down in a hold I keep hearing a noise by the back tire what could be causing that it's new shocks I put on
question..i just had my front brakes replaced about two weeks ago...now they squeel on slow speed why u think is the reason? thanxs
It's normal. It should go away pretty soon.
cool
Hey thanks for the video, I saved so much money! btw I have a mitsubishi lancer 2003 oz rally and everytime I switch gears it jerks really hard, do you know why this is happening?
+Josue De La Pava Is your car manual? It could be that the clutch is bad.
+DarkDragonWing yeah its manual, I got the clutch replaced about 3 months ago?
Josue De La Pava The clutch pump maybe. Maybe you need to bleed it, there might be some air in there,
+DarkDragonWing thank man, ill try that and see how it goes !
THANK YOU ! :)
Mayor Fuglycool
Hi, did you change the transmission fluid or you just feel it up when it needs?
Just fill it up when it needs, or you can to a shop and get it changed.
thanks a lot for very useful videos plz i want vudeo about check and fix defogger system and rear window grid fix
ผมว่าจะซื้อ ซีวิค ไดเมนชั่น 2005 และถ้าซื้อมาแล้วต้องตรวจเช็กอะไรก่อนครับ ขอบคุรครับ
(คนไทยไม่แพ้ชาติไดในโลก สุดยอดมากครับพี่ )
ก็ธรรมดาครับ เสียงเครื่อง มีเสียงก็อกๆเยอะให้ เยอะเกินไปก็ไม่ดี สนิม ไฟ ประตู กระจก เครื่องเล่นเสียง ทุกอย่างทำงานไหม เบาะขาดไหม ยางดีป่าว มีรอยขูดขีดป่าวครับ
ขอบคุณครับ
Hi! Excellent video. You have no videos how to replace the alternator bearings? Because of their whistles belt
Sergey Pronin Oh no, I don't, but you should replace the whole alternator. Or easy fix is to tighten up the belt and see if it will stop making noise..
DarkDragonWing Hola tengo un Mitsubishi Lancer del 2006 y me ala la dirección para un lado como lo puedo arreglar
I cracking bit of Heath and safety there! Having a pair of thongs on your feet lol? Joking aside NICE job pal
Didn't see any bearing hub seal in the assembly, does it have any? how do you protect it against dirt and dust?
No seal for this car.
hey darkdragonwing, what socket did you use the press out the bearing at 3:34 and was it the same socket used to support the bearing while pressing in the hub at 5:49? thanks in advance! Your vids are so helpfull!
Those ones might be a 32mm
Mackey that green bumper is for your lancer
how did you replace automatic transmission fluid?
FABULOUS WORK THANK YOU VIDEO IS GOOD (THE FRANCE THE FRENCH°) merci QI 180
nice job, i wonder were you get money to buy all that stuff because anytime you need something you just buying love to watch you work i have a mirage and i got to much ideas !!!
Jorge Jusino haha I'm glad you got more ideas! I work as a machinist. I don't spend much, I often save. cheers
I hace a mitsubishi mirage 1998 i waiting for more videos
Macky you cheated your using an impact gun lol. You were fixing the faster without it hehehe! Nice job
+kikass187 haha xD
Sorry to reply here, but not able to post like usual on CZcams,,,,,how did you get the retaining ring back in? I have my Lancer torn down and can't get the ring on. I hammered the old one out like you did. I've spent hours, and tried 4 different retaining ring pliers. I can't get the new ring in. How did you do that?
tim prater
Angle it down on one side first, and then use a flat head screw driver to pry it down while pushing/holding it down with a finger, and then use two flat head screw drivers at the same time to pry down even more.
Take a look here: czcams.com/video/HdKiYbj_vy4/video.htmlm8s
you are brave to wear sandals my friend but nicely done like your videos
คนไทยเก่งไม่เเพ้ชาติใดในโลก
Все легко и просто у лансера
what is the best bearing brand to buy and part no please
what are thoes light blue bumpers for what car will y put it on
Jack Sparrow Those are the things I work on when I have time. They are for the Lancer.
where did you get the manual hydraulic press? and without it do you think you could complete the same task with hand tools?
alex ramos Without it, it would be much harder, but it's possible. czcams.com/video/80MnSpZS-a0/video.html Though, I would recommend getting it. I got it from Harbor Freight. Cheers
where did you purchase the bearing?
alex ramos
I got it from ebay.com. I also got the retainer ring from ebay
hola amigo me gustaron tus videos bien intrutivos
i think u should check the ATF while the car is ON! put the gear to N not P because when its P the oil will be at the bottom (which is lower than it supposed to be) , no?
what tranmision fluded you used
Yo dude I have the same problem but with my OZ rally 04 I need help fixing it I did brakes, barings I'm going to do the CV axle I need an opinion or some advice
What do you need?
I think it's the steering rods my shop said the whole steering needs to be replaced. I haven't done steering rods before it's going to be my first time any advice on how I should do it
Here are the videos:
Outer tie rods czcams.com/video/jlYT7OB0ebg/video.html
Inner tie rods czcams.com/video/zPLwHQmKxTc/video.html
Thank you these videos will be very helpful 👍
now thats a long cheater bar 1:04 Maybe I should go find a long pipe next time i work on my car.
my left side axle is clicking on my lancer 2003 GLX .... i think it's bad. i cannot get the part number on it. where can i get the whole axle assembly? and if i cannot source it should i rebuild it?
lee22she Here it is www.ebay.com/itm/CV-Axle-Shaft-New-Front-Left-SurTrack-MI-8113-fits-02-07-Mitsubishi-Lancer-/261646068983?fits=Year%3A2003|Model%3ALancer|Submodel%3AES&hash=item3ceb522cf7&vxp=mtr
The DarkDragonWing
i placed the order....... thanks
+lee22she the noise i was hearing was from my transmission( it's a CVT), while changing the axle i got pieces of metal in the fluid that came out from the gear box. i convert my car from cvt to manual and it drives really good
oh and what socket size did you use at 2:36 to press out the hub?
Sorry late reply. I would guess it was 22mm
Why did you change your bearings?
ernesto7373 It's not good anymore.
well done who teach u these stuffs?
***** I learn it myself
Can you put the BLUE lancer bodykit ON your dark Gray LANCER?
I am Danial DDM
+McGross GTW Will see.
Si tienes un video de los soportes del motor Mitsubishi lancer Ralliart 2004
Sir what is the size of your front wheel bearing?
What is the year, brand, and model of your car?
That happened to me to ( pulled the axle out and oil spilled all over)
Yea that's weird. Did you park on the slope like I did too?
ผมโคตรชอบแท่นอัดคุณจริงๆ
55 ครับ
my lancer 2002 gear oil leak how to i repair ? and also aft ( Speed 70 ) Car Shakes
+jone cena Take it to the mechanic to fix gear leak. You need to get your front wheels balanced. You might also want to check the tie-rods: czcams.com/video/zPLwHQmKxTc/video.html czcams.com/video/jlYT7OB0ebg/video.html
I Was Balanced But Little Good Not More Now Aft 100 Shake
jone cena Ok, at this point you will have to make sure everything feels tight, from rotors, brake pads, tie-rods, to front lower control arms.
The most difficult part to replace would be the front bearings. Jack the car up and sake the wheel to check it. Here is how: czcams.com/video/NBb3ucb3bTQ/video.html
0:55 What happened to the rim? It's broken?
DiRT Luke1992 Yeah, broken rim. Big pot hole on the road.
The DarkDragonWing Okay, cheers.
Will a damaged or bad wheel bearing cause the ABS light to come on?
hollow3501 I believe so. But it also depends on your car's ABS, some cars will indicate that something else is wrong, not necessary the bearing.
+The DarkDragonWing i did a scan for a trouble code and it indicated that it was the sensors, i changed them both, the abs pump and both axles....same problem. Im clueless right now.
What car do you have?
+The DarkDragonWing the 2005 lancer, i think its the model after yours
hollow3501
Did you remove the ABS code? Much like the engine light, after I replace my oxygen sensor, I have to remove the engine light/code.
มาอีกแล้ว *0* เย้
แท่น อัดลูกปืนราคาเป็นเงินไทยเท่าไหร่คับ
4,300 บาทครับ
Necesito saber cómo son los soportes del motor Mitsubishi lancer Ralliart 2004
ขอบคุณครับ
คนไทยเหรอครับเนี่ย
วิทยา ศรีจันทริวงศ์ ครับผม 55