Lancer Fix 16 | Change Outer Tie Rods and Diy Alignment
Vložit
- čas přidán 27. 07. 2024
- Lancer Fix Playlist bit.ly/2JQkmfC
---
🌐 Website www.darkdragonwing.com
---
0:00 Intro
0:14 Outer Tie Rods
2:24 DIY Alignment
---
This is a blue 2003 Mitsubishi Lancer ES 2.0L 4G94 SOHC AUTO FWD.
---
Outer Tie Rods ebay.to/2VH3xY3 amzn.to/3aGT7My
---
1. Changing the front outer tie rods
2. Doing the alignment
1. เปลี่ยนลูกหมาก
2. ตั้งศูนย์
---
Mods on this car:
*Red calipers, red drums
*Security alarm CrimeStopper SP-400 with the engine start system
*Trunk release kit
*GENUINE A/C heater air controller gears kit
*Dual XDM7615 Stereo
*STATIC SILVER RIM By LIQUID METAL WHEELS 17"x7" Rims, 205/40/17 Tires
---
⚠️ Disclosure: This section contains affiliate links to products. We may receive a commission for purchases made through these links. - Auta a dopravní prostředky
Outer Tie Rods
eBay goo.gl/dt6hzz
You are a Right *LEGEND!* I've done this before with my older Mitsubishi Lancer (CK2/Mirage), and came here for a refresher course on how to get it done. I have the Tie Rods, so I am referring to this video to get this done!
I love how simple our lancer suspension and steering system is. Great video ❤
Thanks for this! Just got my tie rods replaced but since there are tons of potholes here in Chicago, I might have to replaced them again but don't want to pay $100+ for a shop to do it.
Thanks for your videos! I just replaced my tie rods. I didn't figure it would be too difficult as I have done it before on a Mazda about 10 years ago. However, I had no idea how easy it would be to DIY on the alignment. When I took it for a spin my wheel was moving to the left a bit just as yours was so I did like you said and I got it perfect now. It runs so much smoother now and I probably saved a few hundred dollars doing it myself. Next time I need something fixed on my Lancer I'll check your channel again for sure. Thanks again!
+ACSpexarth Cheers!!
thank you for filming all of these repairs. ive done alot of the same ones, because of your channel i was able to do everything myself and save a shit load of money and know it was done correctly. much appreciated!
YESS! I think so. and also check the outer tie-rods too.
ขอบคุณครับผม
Easy explanation great video easy to understand Perfectly executed
คับ
Nice idea!
Cheers!
The more you fix your car the better keep up the good work
Cheers!
I simply moved it to the side and used screws to hold it to the bumper.
Go take a look at the pictures at my EvoM forum, link in the description.
thanks cheers!
I'm thinking even further than just that. I'm thinking about time attack car with wings, after market parts on the engine, nitrous, neon, harden suspension, drift wheels, body kits from Thailand, repaint the car, new seats, racing steering wheel, etc.
.
Then I ended up asking myself, "Oh that would be cool, now where's your money?" LOL
cheers
Have a great week. :)
Haha I will, thanks!
จำได้คร้าบ... :D วิดิโอหน้าก็จะเป็การพ้นสี คาลิปเปอร์ กับเบรคดิส คับ
You always do a great job! ^-^
:D Thanks.
เยี่ยมเลยครับ ได้ความรู้มากๆ ตามมาดูทุกคลิปเลย
Good Video For sharing.....
No problem. Facebok page link in description!
With the way you do this stuff you should have your own workshop bro
Keep making these vids bra and CHEERS
thank a lot
thanks
ขอบคุณครับ
สุดยอดครับ
ตอนที่พี่ทำงานเก็บตังได้นู้นหละคับ ตอนนี้ต้องใช้ตังซื้อข้าวก่อน 55 สงสัยคงจะเป็นปีหน้านู้นแหละ
ได้ความรู้มากเลย
Great vid really helped me out
Mack bring it in the shop for digital wheel balancing.
Yea, um I kind of scratch the rust off a little bit and spray paint matte black to cover it.
เก่งมากๆเลยคับ
Not trying to sound mean too, but somebody needs to sponsor me some money because I'm very poor and broke right now. xD
wow you are a beast man
good job bro
Nice work man. been working on my lancer too. thanx for the videos
great vid and work keep it up XD
great video dude.
Thanks!
สวัสดีครับ มีประโยชน์มากๆครับ
ครับผม
เยี่ยม
GOOD JOD THANK YOU
I believe on front FWD cars you want a slight toe out because when in drive they push the toe slighty in so they make them slightly toe out to compensate for that and your wheels are actually straight while driving. RWD make tires go slightly toe out so they do the opposite for the front.
wrong you toe in on front and the back has to have 0 degrees of camber or toe.
hi my friend,make a video changing rear drum brake shoes thx in advance, i learn a lot with your videos
I would strongly recommend to use a Torque Wrench for tightening the rod. over tightened rod may get damaged. The Torque is 25Nm +-5Nm. Still pretty good channel buddy. Wish I found it earlier
Pizdzirynka1 Thank you. cheers
Not trying to sound mean but you should do an episode of you installing some lowering springs.
Nice work man have you ever thought of lowering or upgrading to turbo or something
ผมจะรอดูละกันครับ :D
Hey man thanks for the vid.... I changed it yesterday, took maybe an hr give or take ... 2005 es
cheers
Yup, the old ones were worn out. :)
Nice one man.
Just one question, have you tried to do anything with the rust under the car? I have the same thing on my car. cheers!
Nice video... I have an 1989 Mitsubishi Lancer, I hit a couple pot holes and the last time I hit one I noticed right away my steering was a little off and so I failed to fix it my front tires next started splitting... Geez, I had a mechanic look at it and he said something about changing two stabilizer bars? I'm not experienced with this.
ใช้ปะแจเบอรรัยบ้างครับ
sawati khap dude,
what are the advantages of upgrading them tie rod ends? better steering response? or were your old ones just worn out.
Can you post a video changing the ball joint? Please
Buy the whole new control arm is better. Parts are cheap nowadays. :Lancer Fix | Front Drive Hub, Control Arm - Ep.14
www.ebay.com/sch/i.html?_sacat=0&_from=R40&LH_BIN=1&_nkw=lancer+es+2003+front+control+arm&_sop=15
cheers
Yay :D
Thank you for the video!! I just got new tires and they informed me both inner and outer tie rods are junk... looks like i'll be doing this too.. any tips for inner tie rods?
Yes, get the good tool for the inner-tied rods, the one I was using requires a lot of patience, but still work just fine. cheers
Here I changed the inner tie-rods at the last part in this video: Lancer Fix | Shaking While Driving 60 mph (Semi Fix) - Ep.5
I did the 666 like! By the way you did good! Thanks!
Bro.. my 5yrs old lancer steering has a little bit of play.. do u think its because of e tie rod?
felicidades mui vien eso que tu ase yo los aprendi con tigo y ya los ise y me esconomiso un buen dinero aciendolo yo mismos
where did you get the Sideways Front license plate , plate at ?
great videos very informative..could you please do a inner tie rod on 2002 lancer...shop charging me 400 bucks for parts and labor to change inner tie rod. I found inner tie rod Moog brand onlin for $28 i thinking of doing it myself. Thanks.
Just wondering what brand you went with for the outer and inner tie rods?
Any brand that is cheap.
HEY I CHANGED THE OUTER TIE RODS, DO THE ALIGNMENT PUT NEW TIRES BUT WHEN I HIT 45-60 MPH GOT A LOUD NOISE ON THE RIGHT SIDE CAN YOU TELL ME WHAT'S WRONG WITH IT IT'S REALLY ANNOYING THANKS
That means the bearing is bad. Watch this:
czcams.com/video/HdKiYbj_vy4/video.html
Also buy this to take out the snap ring, it will save you a lot of time.
www.harborfreight.com/11-inch-long-reach-needlenose-pliers-with-45-offset-jaws-39537.html
Is there a way to adjust the rear camber
I have no idea about it yet.
te amo bebe
น็อตล้อรถ ck2 เบออะไรครับ
Hey if u still have the car . can you do a EGR video on taking it out and cleaning it out the carbon
Chris Ruiz Here: czcams.com/video/941McEcxQDg/video.html
Thanks 😁
Is it free? oO
would it be harder to do a rear alignment or is it similar? because i have the same one but oz rally
+Saul Sanchez Hmm, I have never do that to the rear actually, most of the time, you don't have to.
@@DarkDragonWing
Could you show a moderate video or explanation of the rear side alignment parts of your car? I have a 2002 Mitsubishi Lancer ES 1.6L Automatic & my tires are getting bold from the inside thread, my outside outer thread is ok.
Thank You Awaiting For Your Prosperous Response from You Or Anyone Please...
Hey Mackey, can the front cambers be adjusted without any modifications? How come front cambers become offset on this Lancer. Great videos by the way.
I was just adjusting the tide-rods, nothing more. I didn't do anything to the camber. If you want to adjust the camber, you will have to buy aftermarket coilovers for this Lancer.
oh. Thanks for the speedy reply. Your recommended solution for the camber could be my ticket. But, I prefer the factory (stock) setting. How about camber bolts? Does it exist on this model? More power.
No, I don't know that neither.
Thanks bro.. u have a fb or instagram so that I can add u..
Would this fix the shaking when your driving 60 or higher on the freeway ?
Chris Ruiz Yes, it will help stop shaking. To really fix the shaking, you will need to balance your front wheels/tires.
+Chris Ruiz also your control arm bushings may be worn replaced mine and the tie rods and we are good to go!
อยากให้มีเวอร์ชั่นพากษ์ไทยบ้างครับ 😁😁😁
วิดิโอเก่าไม่มีครับ วิดิโอใหม่ๆ จะมีภาษาไทยด้วย czcams.com/users/DarkDragonWing2
สวัสดีคับ จำผมได้ป่าว แล้วต่อไปพี่จะทำอะไรต่อหรอครับ
Why even touch the lock nut? If you don't move the lock nut then the alignment should remain exactly the same as before IF the new tie rod end is the same length as the previous one you're replacing.
:D
the needle in the cluster for my gas gauge drops down dramatically once it reaches halfway, I change the fuel pump but it still the same can it be something else?
+wilber714hernandez Try this to clean the sensor: www.ebay.com/itm/Chevron-65740-Techron-Concentrate-Plus-Fuel-System-Cleaner-20-oz-20-Ounce-/261976510949?hash=item3cff0451e5:g:LOIAAOSwyQtVrvV9&vxp=mtr
Or your cluster might be bad
Hi Mackie. Is there a simple way you could explain the diy alignment. If your steering wheel is going to the right, and your wheels are equal beforehand, then you'd turn each tie rod up instead of down equal turns on both sides?? Sorry for the long question, I hope you can get back to me. I'm trying to learn the tape measuring way..
-Alex
Just think of turning the screw. Are you screwing it in or out? Something like that.
Okay. It's suppose to be slightly toe in. Okay thank you. And tips you suggest??
@@user-hv9bx6yp4g Yes, with steering going to the right and the wheels are already the way you wanted, that means you have to turn each rod up equally on both sides.
@@DarkDragonWing okay.. very much so appreciated. Seems to be the biggest problem for me too. Very informational video too btw!
What I need to do if my steering wheel moves alone sideways, right into plane sites is maintained but if the street is pending, the steering wheel moves to the slope.
Your "steering rack" might be bad.
oh ok ty i will check that, btw im a new sub all the work you do on cars is awesome
una abrazo desde el vecino pais del sur
Does it go toe in or is it toe out?
Not sure. Best to take it to the shop for an alignment.
Pozdrav (Srbija) Lanser 1.3 gl
สอนแกะคอนโซน ช่องลมแอร์ck 2
+Nuare Rukoo czcams.com/video/JKSNNpeFjAk/video.htmlm49s
send me a video a video of a Nissan Sentra alignment the outside tire rod thank you how many times do I turn it to take it off and to put it in
+Frankdmorin14 Morin Hi. I don't have the video.
0:39 how to use that tool ?
Or fixing the AC because my 05 Lancer has a AC problem ,when the air comes out warm ,when its suppose to be cold air.
Chris Ruiz Here: czcams.com/video/cpU-blF9SVU/video.html
That for the gears but I meant about the air conditioner when I want cold air it comes out kinda cold, but 10 mins later it ,the AC air starts warming up
Chris Ruiz
I see. You need to turn it off for a couple of minutes. When you turn in on really cold, the hose will start to freeze and it will not get colder, thus it gets warm.
So the solution is ? My brother told me about the air compresser . Idk
Sorry for asking a lot of questions .its just because, this lancer is my first car and I'm learning on fixing it ☺️
hit it with a shot of spray paint, that way u don't have ta count
next time use the clip, o have learn the hard way the nut will come lose because off vibration. and it fall off while driving 50 mph and went in a ditch not fun all. just saying
Тамаша
แล้วพี่จะแต่ง body ตอนไหนหรอครับ
czcams.com/video/t8og6tM6Fvg/video.html. ถ้าเสียงแบบนี้มันพังตรงไหนอ่ะครับ
It's still maybe Towing in or Towing out,!!
Just because the steering wheel is straight does not mean that it is lined up!!!
I totally disagree !
You can't do it like that!!
ดูคนอื่นทำไมง่ายจัง -*-
ทำเองแค่แกะน๊อตล้อยังไม่ค่อยอยากจะออก T^T
ปล.ดูคลิปพี่หมดนี้ซ่อม ซีเดียเองได้แน่นอน เบื่อจะไปร้านหละ
:D