Dyson V10 disassembly and cleaning tutorial.
Vložit
- čas přidán 31. 08. 2023
- Is your Dyson pulsating, loosing suction or does it smell terrible?
In this video I show you how to deep clean your Dyson V10.
If you have any questions or comments, feel free to drop them in the comments! Enjoy!
→If you don't want to miss a video or if you want to support the channel consider subscribing.
→Instagram: / spare_time_. .
→As an Amazon Associate I earn from qualifying purchases.
Tools I used:
-iFixit Pro Tech Toolkit: amzn.to/3X92AFk
-Stanley PZ1 screwdriver amzn.to/3QYxMH7
-Isopropanolalcohol (IPA) amzn.to/3kovZg2
-Canned air amzn.to/3kcgPKU
-Contact cleaner
-Q-tips
Parts:
- Filter amzn.to/48088Yr
Recorded with:
-Canon 4000D: amzn.to/3ZxNSt2 - Jak na to + styl
Thank you so much. Too often these tutorial videos are not detailed enough for a novice or first timer to understand, or miss key details about screw placements or types used for each step. Never once felt lost or without instruction. Successfully tore apart, cleaned and reassembled. Now have (most of) a second vacuum after the first main body was replaced under warranty. Thanks again!
A very detail disassembly and cleaning tutorial, thank you so much. I am just doing my deep cleaning following your steps.
Well done. However another solution is that Dyson actually build their vacuums to NOT require this complex process and that the removable filter be all that is needed. My opinion of Dyson has significantly lowered.
Helped a lot, I was cleaning it up, but I was afraid to open it. Now you gave the confidence
Nicely done. I would never have braved disconnecting the wires without your tutorial. This is the most difficult of any of the other Dysons I have disassembled and cleaned. Not sure I would do it again. Hopefully won’t need to. Thank you.
Thank you, I also found it the most intimidating dyson to take apart. (So far) I had also tried disconnecting the connector on the other side. But I couldn't get that done.
Excellent step by step! Thank you much. It was a great help to unclog my Dyson
My internal / cyclone bit was 95% clogged with fine dust. Absolutely no airflow getting throw. Even the motor part had dust falling out of it. I thought the bin was to collect all the dust not the internals! Anyhow thank you working like new now.
Great video, helped me a lot.
Thank you very much.
Très belle démonstration 👍👍👍
Verry good
Thanks!
Verry good, thanks
You're welcome, thanks for leaving a comment.
Здравствуйте. А на максимальных оборотах проблема не ушла?
Dust container is stuck on something. I can't even fully lower is to clean all trash from it. Any idea what could be stopping it. The little lever you touched to remove it doesn't disengage it. Thanks!
No sorry, I was surprised though how much force it takes to slide it open. Maybe it's only stuck that it comes loose with a bit more force. I don't know any other way to open it.
Thank you
Dust gets everywhere. A downside of a bag less vacuum
I want to clean inside the piece that the filter attaches to as that's where mine is smelly. But it wasn't shown in the video as far as I can tell.
No I did not show that in this video. Search on youtube for motor replacement dyson v10 I never filmed this myself.
@@SpareTimeWorkshop
Cheers found it, looks like there isn't much to clean in there anyway but it smells so it must be something!
Muy bueno el tutorial pero yo de siempre lo primero que hago es quitar la batería o cualquier fuente de alimentación
Thank you, I guess in this case it doesn't hurt that much to leave the battery in. But thanks for sharing your advice
Franchement je préfére un aspirateur puissant avec un sac à changer, qu'un dyson impuissant qu'il faut complétement démonté pour le nettoyer....on marche sur la tête, comme en presque TOUT !!
Yo desarmarlo muy bien, pero montarlo imposible. Adiós Dyson
👌👍👍👍
I don’t have that little bit of extra cable length to be able to push the cable out to disconnect the wires
Not even if you slide the parts back together?
Yea. All that extra cord you had after pulling off the first part at like 3:05, mine didn’t have that extra little bit of wire tucked in that second part
@@ishnipepew6461 That is annoying. There is also a video online of someone unplugging the connector on the other side. But I don't think that's any easier.
Can you maybe pull out the connector while the parts are still together?
@@SpareTimeWorkshop so after I pretty much but the parts just about completely back together I had just enough slack to push it out like you did and just barely get the box out to disconnect the wires. Idk why my cables are so short
@@ishnipepew6461 Well done, seemingly not all dyson v10s are created the same. So it seems. 😄
Absolutely the worst value machine out there. Why? I moved into a brand new flat, am single and hardly make any mess. This is my second replacement. It is impossible to see where there could be a blockage. Initially it stopped working after a week and I was given a replacement. After 4 months, it stopped again. Was sent a new filter, did not work. Was sent a new main body. Why do we know this machine is useless? Dyson send a new body and do not ask for the old one as they know this will happen over and over again. As it has done to many, many other people. Just Google Dyson V10 problems and it is always the same issue...BLOCKAGE! Very expensive vacuum cleaner and when the guarantee runs out...no more replacement parts and you will have wasted your money. DO NOT BOTHER BUYING THIS MODEL.
Which vacuum did you end up buying after this dyson?
Ridiculous, ridiculous, ridiculous. To have to go through all that that get the damn thing to work.
Tutorial goes way too fast! Needs to explain more clearly each step. ie tapping the electrical connection to get it loose. I did as was shown in the video and broke the connector clip to hold things in place, by tapping on the wrong thing. We must have stopped the tutorial at least 50 times to try to see exactly what was supposed to be done. aVERY FRUSTRATING!
Thank you for your feedback. I am sorry to hear that you damaged your Dyson.
Besides the part of disconnecting the connector, can you explain which parts of the video were too fast for you? Then I can make my future videos clearer for everyone.
Thank you.