Making a Solenoid Boxer 4 Engine
Vložit
- čas přidán 15. 09. 2019
- Get Drawings for this Project: www.maker-b.com
Tools I Use: maker-b.com/pages/tools-i-use
In this video I'm making a 4 cylinder solenoid boxer engine.
I hope you enjoy this as much as I do!
FOLLOW ME:
Instagram: / makrr_b - Věda a technologie
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Big thank you for your wonderful and supportive comments!!
The plans for the project are available at www.maker-b.com
Tools I Use: maker-b.com/pages/tools-i-use
00:00 making the Cylinder
01:34 making the Pistons
02:59 winding the Copper wire
03:10 testing the Solenoid
03:24 making the Crankshaft
06:26 making the Connecting rod
08:37 making the Engine frame
10:24 installing the Bearing by the press fit
12:03 making the Back Flywheel
14:03 making the Front Flywheel
15:27 making the Wood base
16:32 assembling the parts
18:37 showing the finished engine
19:36 checking the rpm
Again, thank you for watching this video :)
Any chance of You making me one of that? I'll pay
Make some more videos like this! It’s amazing! 🤩
@@thekingsilverado9004 " perpetual motion motor" *takes drink*
@@thekingsilverado9004 But, Tesla cars out perform Detroit models, only after being in business for a few years. They're currently building the world's largest automotive manufacturing plant (in China)and revolutionizing Lithium battery technology. You ain't seen nothin, yet.
BTW, SpaceX is going to Mars.😎
♡
No stupid soundtrack, just the real sounds! Perfect skills, perfect tools, perfect work! Perfect video!
Agree
Yeah its usually the really fkn annoying ukulele or epileptic fit techno
Couldn't have worded that better
Agree x infinty
Lame. Usually I break out my glow sticks while watching these... 😁
These are the best type of videos, no commentary, no music, just all observation.
@Joe Dirt yep
I cannot understand why they put the exact same nightcore song in all machining videos, they're so much better when it's just this simple.
.
Sound effects...
Agree
O-kay, so this isn’t the LEGO version or made of parts from the hardware store. No. This is real craftsmanship. And very enjoyable to watch. 👍
Who tf cares if it’s Lego or made of hardware store parts. It would still be a functioning engine.
@@billiam_bob i think ur missing his point
I mean, while the craftsmanship here IS very impressive, I think most people that use LEGOs or hardware store parts do so because they don't have access to this kind of expensive precision machinery. It's more than a question of craftsmanship alone
@@Sven-kc7rq no, I think your missing the point. It doesn't matter if you 3d print, if you use Legos, if you use expensive machines or hardware store supplies. If you make something such as a model engine, then it's craftsmanship. Simple as that.
@@scarecrow5848 you missed the point. This is quality and functional.
This is why I watch CZcams: to watch people do amazing things with tools I cannot afford.
I literally NEVER comment on CZcams videos or really even read the comments. But this right here, is the truest of all things i've ever read on the internet.
In my case it would be 'amazing things with tools I can afford, and with talent I don't have'.
- No flashy BS thumbnail or clickbaity title
- No annoying and pointless intro/outro blather
- No annoying and pointless music, just pure manufacturing sounds
- No pointless and distracting captions
- Pure making, making, making right from the start
- Perfect camera work, allowing the viewer to follow along
- A simple "thank you for watching" at the end. No "please like, please comment, please subscribe, please buy this, please let me annoy you with my other videos" etc.
Thank you ever so much for making this dump called CZcams a better place!
Giorgos S The only thing I would like is an explanation of the process because I don’t know anything about engineering
He even cuts out the time consuming parts of things like winding every coil, drilling every hole, etc.
@@survivor8008 удачи вам ваших творческих дерзаниях.
My thoughts exactly. It’s about the process not the person! Though I’m sure the person behind Maker B is cool :)
The only people I care to hear talking over awesome stuff like this are AvE and TOT!
Absolute precision engineering. Love the diagrams of the parts you are creating. Excellent touch. 👍
Thank you! Cheers!
Easy to follow, precise. This is the kind of content that you don't just skip through.
The whole point is the process of making an interesting device, and that is fantastic.
But the very best part of these videos is the sharp and just-right editing.
As a retired manufacturing engineer and programming with APT in in the early stages of machine programming I must say that your video was a pleasure to watch and your little engine that could was AWSOME.
This video made my day. Me and 8 months old boy were watching this video without blinking and were enjoying all the precision machining, tools used and the lustrous metal pieces. The final outcome was just WHOA!!!!
I was enjoying it with my embryo.
@@custardtart1312 i was enjoying it all alone in the darkness
Honestly one of the coolest things I’ve ever seen someone build.
Very cool to watch.
I especially loved the genius idea of the off-center crankshaft sections serving as cams, each closing microswitches for the pistons' timing.
I do see some runout in the working motor, rather unexpected given the precise tools used to make it.
1 day when I'm all grown up i wanna be like you...i'm 43 years old though. Dude this blew my mind. YOU ARE A GENIUS.
I even have the tools to do this, but i never feel the motavation to try
@@obiwankenobi2749 at least you know to fight with a lightsaber.
Hey My Friend,
I have to tell you that me, being an Electrician, mechanic, and Electrical Engineer for 40 years, You my friend are very talented!!! I believe it's a gift from God. You either have it, or you don't. (like musicians). You really have it and you have the skills to make the world a better place!!!
Amazing!!! My hat comes off for you!! Keep up the good work and God Bless YOU!!!
Thank you for the kind word!!!
I always told my kids when they were growing up "Be grateful for your talents, and be proud of your skills.
Obwohl ich in den 70er Jahren, als ich in der Junior High School war, versucht habe, einen 4-Zylinder-Elektromotor mit Magnetspulen wie diesem zu bauen, habe ich ihn nur ein paar Sekunden zum Laufen gebracht. Ich wünschte, ich hätte eine Metalldrehmaschine, eine Fräsmaschine und die anderen Werkzeuge, mit denen Sie alle Teile hergestellt haben. Alles, was ich hatte, waren Metallklammern, die ich zusammen mit Teilen von einem 8-Spur-Player und wahrscheinlich einigen Erector-Set-Teilen zusammenkratzen konnte. Es ist so viele Jahre her, ich kann mich nicht erinnern, was ich alles benutzt habe. Zu der Zeit fragte ich mich und frage mich immer noch, wie ein Motor wie dieser in Bezug auf Effizienz und Leistung im Vergleich zu einem typischen Motor wäre. Dies ist ein ausgezeichnetes Video, Maker B
Mind-blowing, wonderful, how intelligent is the maker of this small engine - he is worthy of high appreciation.
The precision in making the parts is truly a "next level" skill, let alone the engine is working!
This is beyond what 'brilliant' could describe!
Thank you for sharing, I can't stop admiring your work. When I was in engineering school we made engines plain parts, but were big jobs, your work has more meaning because of the size, precision and detail. All the best from the distance, Montevideo-Uruguay. Be safe and have a good day.
Thank you for making an actual boxer engine and not a wrongly named flat 4, One of my favourite engine configurations, smooth running.
Glad you liked it!
Watching you come up with these things I am left with a sense of awe and relaxation all at the same time.
(1st video I watched was the cylindrical safe this is my 2nd. Can't wait for the rest of them...lol)
You don't show too much and you don't show too little.
And the sounds of the machines are just enough of a sample to give us the idea of the energy involved.
You are highly skilled and much appreciated.
AWE by definition, you are challenging my understanding of the world
That's quite a compliment! Glad you enjoyed it.
ものづくりって凄いなーって思った 日々の機械や道具に感謝 職人さんに感謝と尊敬を
A work of art... Utra quiet too. If I saw videos like this when I was a kid I would not have flunked metal workshop. Truly inspirational.
This is extremely satisfying.
I've nothing to do with this stuff, still I watched this full video. I think you're amazed when you see these mech things working together! Good work..
For some reason, I just really appreciate the audio on this. So soothing. The whole build was excellent.
Had i not being speechless, i would have said (at least) WOW.
Thank you so much for sharing this amazing proof of 'craftsmanship will never die'.
Excellent video!! The concept, craftsmanship, and engineering is impressive.
I am speechless !!! I just watched it all without skipping anything ! Kudos !
I love how you have the part/ assembly ISO in the top corner, thats a nice touch
16:32 wallpaper-esque
I didn't even notice the little blueprints in the top right corner until reading this comment.
That was truly special.
Thank you for listing the awesome tools that you used !
No wonder this Video deserved 18 Million view. This is mechanical craftsmanship at its best.
Kind of amazing how you got the timing correct. Most solenoids and coils have some variance, even amongst the same brand setup. Excellent work!!
Although I tried making a 4 cylinder electric motor with solenoids like this back in the 70s when I was in junior high school, I only got it to run a few seconds. I wish I'd had a metal lathe, a milling machine & the other tools you used to fabricate all the parts. All I had was metal brackets I could scrounge up along with parts from an 8-Track player & probably some erector set parts. It's been so many years ago, I can't remember what all I used. At the time I wondered & still do wonder how a motor like this would compare to a typical motor when it comes to efficiency & power output. This is an excellent video, Maker B.
@Mason Gilbert All true and accurate. Thank you.
Ehh, I like this better. It's got major novelty appeal. If I want something that DOES something, I'll just buy it, pre-done..
@Mason Gilbert I too was curious as to the efficiency of this design, the discharge over time of a battery, etc... Though, I kinda totally figured this to be the case.
Super-cool little widget, though! It would make for a very interesting RC model motor, or just a super-cool paperweight. :D
AGREED 110%
Mason Gilbert I lost it at the joke LMAO
@Mason Gilbert I too appreciate you explaining why this is not efficient. As I have lots time on my hands I don't want to waste it inefficiently. Now I can think of something solenoids CAN DO more efficiently than other machines.thanks
Outstanding! Makes me wish I still had my South Bend lathe and Bridgeport mills. Nice work.
You should not thank us for watching. We should thank you for making this
I've only just found your channel. Congratulations. That is amazing work.
Man, what a genius machinist, master craftsman, and engineer.
No doubt!
This just made me truly appreciate my Tech Ed course I’m taking. Thank you so much for posting this little marvel!
This is more beautiful than anything I could ever hope to make....
Good way to continue on 2021.
I have absolutely no intention of making anything like this, yet it was extremely enjoyable to watch!
Fabulous work, well done!
You're amazing, my son does this job in an industry, where he starts with CAD drawing and works on numerically control machines and does prototypes and experimentation in a team of 4 people.
The skill of this man is incredible,i understand that he uses a great machine for to realize all,(alpha numeric control machine ?), but.....without a clear image in mind on what to do and a great manual skill nothing of that is possible.....congratulations man.
Simplest of concepts put to work in a neat and clean way love it
I'm a Machinists for 26 yrs, so this was an addicting build. Came out beautiful man! Build yourself a small steam engine those are fun to make.
I love how clean and well cared for your shop/tools are!
But this don't reply to his fingernail... gross
@@velinshishkov384 what do you I don’t see anything wrong with his finger
Mind-blowing, wonderful invention, efforts made are appreciable.
Informative. Useful. Calming. Inspiring. Life-changing. Enjoyable. Heart-warming. Other.
Well done, nice to see all the machining and assembly. Then a working model! Good job!
Thank you :)
Very good video. Exactly what we learned in Manufacturing Engineering Technician Program. I will explore more in this field. Thanks.
so many amusing videos to watch during the lock down . thanks
Wow... I think that says it all. Great work bro, it's rare you see a video where all the comments are positive ones. That pretty much speaks for itself. Bravo.
That's an amazing talent !! Thought process and ability to mentally visualize the components is commendable.
You know it is pretty neat it even has a boxer rumble sound.
Genius at work. Works like a real engine.
Great lighting too. Nice and clear! Well done!
Using limit switches to time the energizing of the coils is brilliant!! I really enjoyed watching this work.
Impressive knowledge of mechanized parts over a late... remember me when I was at high school technical. Thanks for sharing!!
Wow! Incredibly clever guy! Thanks for making me feel hopelessly inadequate. Great skills sir.. bravo
This is like watching Bob Ross paint.
You are an artist, keep up the good work!
Wow. This is amazing!! The amount of skill, patience and effort is incredible!!!
Thank you!!
I spent 20 minutes watching this in fascination... and I was sober.
you've got some engineer in ya
Imagine how cool it would have been other wise
Just realized I did the same thing tho it felt like only 5 minutes went by
You are definitely super natural ! You must be a very young person because of the appearance of your hands. I just started watching your videos and also, your machines dont look like very expensive . Amazing quality and workmanship.
I would buy this for my desk and start it here and there, just to enjoy a little bit of craftmanship whenever I feel the urge to procrastinate!
Something so satisfying about watching a lathe cut through metal
I KNOW RIGHT!
@@abhijitnair08 ha, seems I'm not the only one who feels that way lol
2:30 I would have used the lathe on a slow setting to wind the wire and have it in neat rows with the sire perfectly side-by-side. I think it would look better. Thank you for another mesmerizing video.
Yes, as a musician, I would have liked the winding to be like a pickup.
it's a pleasure to see you at work
Blows my mind how that can be timed so accurately
Ah yes, the youtube algorithm at 3am
Kkkk yes
ʕ⁎̯͡⁎ʔ༄
7:30 here
7am.....
my sleepnig schedule is so fucked
응우옌 어서오고
This brings back so many memories of working on my old Subaru Legacy and its Boxer Engine
Hats off to you mate, your skill in micro engineering is beyond amazing....
Thank you! Cheers!
That was awesome, nothing better then watching someone else doing a great job.
I like the small pics in the corner which shows the parts he is making at this moment
Untill you mentioned them I hadent even noticed them, some much was my view glues to the centre, great show!
Good eyes man👍
I don't even know why I ended up watching this but it is superb craftsmanship!! Well done mate!
This guy is a genius. I wish I had his skills.
The video is very instructive. Loved every minute of it. What would make it complete is an explanation of how you managed to program the sequence of the solenoids. That is critical to the proper fiction of the engine. Thank you
Great workmanship! The best part is the lack of music! the sounds of the machines are so much better
Absolutely brilliant,great piece of engineering,well done, subbed
Love the cutting edge grinding/cutting machine!👌👌
One of the best videos I have ever seen around here, on youtube.
Thanks
As a fulltime machinist I would have made a few minor changes.
But thouse would have requiered more complex machines so he still did an amazing job there.
I am very impressed.
Keep it up.
Jack St yes I agree my bro and my dad and my ex was machinists.
love you full of yourself people....you would have made changes....lets see your video...
I wish this was availlable as a kit. I can't make it because of a lack of space and machinery to put in that space. Very nicely done, keep enjoying your hobby.
This was awesome to watch and relaxing
Thank god there was no music.
Facinante trabajo de maquinado e ingeniería.
Mi sincero reconocimiento y admiración.
This is one of the coolest video ever seen in my life, well done !
This was a FASCINATING build!
it even sounds like a beetle, AMAZING!!!
Single most amazing thing I've seen in quite a while.
I have watch many videos on youtube, but I must say, I watch this to the end, it was so good to see, this it made me wish I had the money to buy the tools to make somethings like, not to forget the ability. love your video
I love things like this, no reason for it's existence other than the satisfaction of seeing it run ... although you do realise what you have to do next ... hide the wires through the table, add a small dynamo on it wired back and repost the video as a free engergy machine. Get people arguing over it to make enough advert money so that you can then make a full size one for a car, a V12 arrangement would look cool :D Batteries might be an issue though lol
so this could effectively work poppin out the bonnet of a tesla even if it would ultimately be aesthetic, but could you give it a function, cos it looks like the most thoughtfully designed engines ive ever seen and instead of a huge roar the coils would spit lightening right? maybe you could have a plasma vaccum chamber around it so you could see how the charge intensifies as you depress the accelerator!
Also what kind of loctite is the green and purple solutions for marking things cos if you dont try what i suggest then i WILL!
one love, and keep inspiring the designers of tomorrow!
@@tobiasphillips7359 it's extremely inefficient and serves no purpose other than to watch its moving parts.
No reason for all the extra moving parts with an electric motor either. Making zero sense.
You can bet they thought of this idea though before rotating magnetic fields were discovered. Making early steam engines run via electricity.... hmm.
Yeah and end up like Stanley Meyer?! “They poisoned me!!!”
Complimenti un lavoro di pura bellezza e precisione,l'ingegno umano unito a macchine di precisioni può creare qualsiasi cosa .
Absolutely amazing! Beautiful machine work and creative design with lots of precision.
What an absolutely gorgeous piece of "OCD" engineering!
Thank you for displaying the part that you were working on in the top right hand corner. Very nice work. I started one of these today.
This is the only form of electrical engines I can accept.
As a computer engineer I feel like an imposter amongst anything mechanical. This is marvelous ⭐
when the computer engineer is sus
Hahaha, I know right? Beautiful work.
amogus imposser sus 🤣🤣🤣
Imposter????? Amongst?????
Ах!! Смотрел не отрываясь!!! Залипательное совершенство!!! У Чела - Золотые Руки и Голова!!! Браво!!!😎👍
И очень хороший электромагнитный двигатель получился.
@@user-um2yc1vj8i Ага, прям отличный. 90 процентов энергии - в тепло ;)
You know you're a next-level engineer when your hands are as clean and soft as that.
hmmmm !!! you see the tools ?
czcams.com/video/5PU0Kbo5Tos/video.html
Fascinating and delightful, beginning to end!
I like this video)