Making a Pocket Hydraulic Car Jack
Vložit
- čas přidán 10. 11. 2023
- Get Drawings for this Project: www.maker-b.com
Tools I Use: maker-b.com/pages/tools-i-use
Thank you for watching :)
This is how I made a 1/5 scale hydraulic car jack(bottle jack) from scratch.
+ Explanation of basic working principle through 2D animation.
Instagram: / makrr_b - Věda a technologie
What do you want me to build next? 😀
The mechanical drawings for this project are available at www.maker-b.com
Tools I Use: maker-b.com/pages/tools-i-use
We will love anything from U, 💗 Love from India, can I ask which country are u from?❤😊
Can you make a clock?
mini power washer
For the mill you have, a rotating fixture table that allows you to make radius cuts. ;)
an orrery please
the fact that you went back and cleaned up the cuts on the foot earned another sub, that little attention to detail is what my brain craves
You made a mini car jack and didn't jack up an rc car or truck lol seriously though nice job.
I love it!! I grew up in a mechanic shop where bottle jacks were considered a third arm. My grandfather offered twenty bucks to anyone who could carry one of our twenty-ton jacks one mile without changing hands or setting it down for a moment. I just remembered that until I watched your video. Gramps has been gone for forty years, so thanks for the memory! You haven't lived until you used one to jack up a semi along side an interstate in sub-zero temps!!!
I've always wondered how those jack worked when I go out with my dad to lift our cars. This is such a cool project! The precision of your work satisfies me very much. Amazing work!
Glad you liked it!
You and JohnnyQ90, are two of my favorite channels. Simply, informative and relaxing. The ASMR of machining.
I have to tell you an embarrassing thing. At 2:35, when the mill stopped, I literally blew on my phone to clear the chips.
not just me then
That's 4K for you 😀
I almost reached a thumb across my screen to do the same thing
OMG ME TOO!!! I feel so much less hopeless now hahahahaha
I’m just glad that I’m not the only one
Would love to see it tested against a scale
Just not tested to the “failing point”
@@redneck_cowboy7826 the failing point would likely be the o-rings, so that's relatively easy to repair anyway. I don't think the metal itself would break
True@@dantevito1193
Exactly, I only watched to see it tested to its limit. Once I saw that rubber plug I was instantly disappointed
@@6daysago167 the rubber plug only seals the oil reservoir, it's never exposed to any pressure
As a fellow engineer, this is highly informative. Very nice work.
@@ImproveConditions
>on youtube
>using 4chan texting
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Everything about this was badass and impressive.
Stellar work as usual. Loved the animation and explanation at the end!
I think you earned compliments for the filming and schematic demonstration. Also for your steady patience while making this humourous tiny tool. It must have a great powered ratio ? Two or three hundred pounds, I'll estimate! Wonderful machinery. If you know the upper limit of capacity ( which I'll search for next) do let us know in reply? Thanks for sharing your adventures
Beautiful work! You are truly an artist!
You had my interest during the manufacture, but the concise explanation of the mechanism's function after? Now, sir, you have my attention.
Fabulously edited.
I absolutely love watching things being made for no reason other than because.
Wow! It's amazing how many parts are in that little thing. Great job!
This is one of the coolest things I have ever seen on CZcams! Great work!
Now this is to darn cool. Beautiful work.
Finally! A useful jack for my Hotwheels cars🤩
Your videos are always worth the wait!
Glad to hear that!
Finally. A decent video of an obviously talented mill operator that has no blah blah yackety yack and no crappy Muzak. Love it.
Yakety yak ... don't talk back...
You just put on your coat and hat
And walk yourself to the laundromat
And when you finish doin' that
Bring in the dog and put out the cat
I never miss one of your videos. Just amazing. Thanks for sharing them.
Great work, and the cad at the end was really informative.
You're a bloody genius. What I would love is a commentary or subtitles to explain what magic you are actually doing, and why you do it the way you do.
Subtitles or annotations, but please no dialogue. The silence is the main reason I like this channel
@@scumbaag and I'd agree with that, you're right
Or, keep it as it is. Some of us like seeing how everything falls into place…
A fellow engineer (retired) and hobby shop machinist - one of my favorites for projects. I’d love to tackle this. Great video too. 😊👍🏼
that's pretty darn cool and creative!!
Yes, this is really excellent work.
Super!
Now I finally know where my little jack is.
I've been looking for it for so long.
Thanks again for this nice tutorial.
Hey man, you're making great stuff and the channel is growing well. Just keep working on such topics. Everything's fine
The whole process and the result are great. But so is the editing! Very nice, educational and relaxing video. Thank you very much
Glad you enjoyed it!
And the Lathe is a lot of it
Wow. Just, wow, man. Excellent work. I loved the testing rig. Quite impressive lift!
I'm always amazed by the power of hydraulics. Very cool.
I could see myself buying this as a kit, its soo awesome.
That was *_OUTSTANDING!!!_* Now you need to do a 1/5 scale hydraulic (roll around floor jack)
Sometimes these young people really shine, This young man is a real treasure,
That is very kind of you to say. Thank you so much!
This was some mighty fine machining, beautiful craftsmanship, and excellent attention to detail!
You earned a sub. Thank you for sharing!
Thanks for the sub!
Amazing workmanship. Neatly and precisely done. Hats off to you bro. 👏 🎉
Thank you!😀
Beautiful job and perfect editing 🙂
Very well made.
Also the explanation is very clear.
Love to watch this kind of high quality tech films.
Thanks for sharing this nice piece of art.
Glad you liked it!
Incredible scale work! Thanks for sharing!
23:27 this reminds me of a desktop "toy" that my uncle received when he retired from the mining industry. About the same size as the jack you made, a fully functional antique style miner's lamp. My brother and i would always sneak it out to play with. :))
Finally, a bottle Jack rated to change the tire on my Prius
That’s cool, glad you jacked something up with it. Thank you for your time and knowledge
Mechanical engineering lifted to another level, but ever sooooooo beautiful!
Снимаю шляпу перед таким мастером. Моё Вам почтение и уважение.
I actually think this little jack could be handy for all sorts of stuff around the shop! Never know when you need a tiny press. Or you could squeeze it into a body panel cavity to push out a dent! Cool stuff dude!
There will come a day when it will be useful, right?
@@MakerB I bet you'll find a good use for it. So long as you keep working on stuff 😉
You can use it to lift rc car to change wheel
Nice work! Like to see when skills and patience work together, quite rear compilation🤔🤔 Thanks for the video, relaxing after 12 hour workday!!!!
Wow, super cool lil project! I’d love to have one of those sitting on my desk!
이런 영상들을 볼때마다 항상 궁금했던게 이런것이 어떻게 돌아가고 작동하는지였는데 마지막에 있던 설명덕분에 완벽히 이해했습니다. Maker B님을 존경하고 저도 언젠가는 스스로 설계하고 만드는 사람이 되기위해 매일매일 노력 중입니다 이 글을 못알아 보실수도 있겠지만 항상 감사합니다!
Good luck with everything. I'm rooting for you!
k wea
Beautiful scale piece, enjoyed the build completely. Are plans an available for this project, it might be fun for a winter project. Cheers!
That is a pretty small jack, I am impressed that you can make it work without compromising tolerances.
This is the kind of precision that only a true master can pull off.
Inacreditável 😱 parabéns mto top 🇧🇷🇧🇷🇧🇷😁
if i won the lottery i wouldnt tell anyone but their would be signs...... *me purchases all the tools to have one on my desk*
*Awwww so cute!!!!*
Lovely work
I can actually see a lot of real world potential for that small jack. Brilliant.
Can you build a tiny hydraulic press
This is exactly the kind of extremely functional but entirely useless thing that i wish I had the patience to make myself.
Also my most complex tool is a hammer, and my hammer is actually a broken wrench
Great content deserving a 👍No head banging metal music, constant narration, cussing etc-very relaxing and easy to watch.
First time here and it seemed to end before I knew it-well done. God bless.
Thanks for the kind words!😀
The quality and precision of your work is outstanding, please keep up the good work👌👍
It didn't lift a car.
Well done. I enjoyed watching this so much. It brightened up my day. Thank you 😊👍
Great work! Wonderful little jack!😁🛠️🔧
Great job, great mastery. Producing it obviously is not as easy as it seems. Full of art. More videos please, wish you good luck :)
Much appreciated, thank you!
So impressed. That is awesome!
Thank you!
I don't care what you make, just watching your work is incredible enough..😉👍👍
Great little project. Your video is fantastic showing the build of the component parts and drawing explaining the functions.
Thanks for sharing.
Glad it was helpful!😀
That was freaking awesome! Highly skilled, and i learned a few things❤
Beautiful work - Bravo ! - Very well done - Masterpiece !
glad to see you back. I super enjoy your videos!!!
Stunning job
Excellent working model....collector's item !!
May be small, but it's built better than most mass produced tools. Nicely done!
Pretty little machine, well made and beautifully filmed!
Awesome - Really great work 👍
🙏
I started my hobby machining on a Sherline. Miss it and wish I still had it. Good machines and I was surprised the size of things I could make with some creativity.
Well done.
Sensational !!!
Best Regards From Brazil 🇧🇷
He is back!!!! amazing work man keep it up hehe
Beautiful piece! Well donw! Thank you for sharing.
There aren't enough thumbs up for this video. Awesome result.
Your editing is so excellent ❤
Very cool, and great workmanship!
You memang best cara pembuatan nya cukup lengkap sekali ni di katakan pro original no 1 k bro up2 lagi benda lain selain ini ok
Love seeing shearling lathes produce such amazing work
A work of art, a real jewel.
What an amazing build, thank you for the information about how it all works as well.
My pleasure!
this is hilarious, love you actually using hydraulic fluid and all.
Finally, the perfect jack for my Miata.
Awesome! 😻
I love your work. Your interest in metal working and machinist skills must have begun at a very young age. 👍
Ambitious and brilliant 👏.
Thanks for sharing
You did such a phenomenal job sir. Interesting at the 7:00 minute mark how the cylinder was warped, but wasn’t for long!
Mr maker b you are amazing .
I take my hat off to such a master. My respect and respect to you.
As a fellow engineer, this is highly informative. Very nice work.. Beautiful work! You are truly an artist!.
Much appreciated, thank you!
Really your ability with metallic materials, is amazing.
raw skill 😮 very envious.
Beautiful - Thank you. Tom (from France)
My pleasure!
Amazing work, as always!
A man of few words, respectable