S&W M&P Shield Plus/Equalizer Speedloader - 13 round mag loading - 1st method
Vložit
- čas přidán 28. 05. 2022
- - Made in the USA from PETG plastics (Coke bottle material, much stronger than PLA, and higher temperature resistance). SEE VIDEOS ABOVE. Free Shipping!!!
- Our "Syringe" style grip/loading makes loading S&W M&P Shield Plus magazines easier and faster (See videos).
- I am the original designer of this "Syringe" style loader.
- To provide the best and strongest quality product, each speedloader takes around 4 hours to make with PETG.
- Works with S&W M&P Shield Plus 9mm magazines only.
- Takes me an average 21 secs to load 13 FMJ's into S&W M&P Shield Plus 13 bullet extended mags. See videos above for 2 methods of loading.
- Magazines are not included, only the loader for S&W M&P Shield Plus 9mm magazine is shipped.
Ebay:
www.ebay.com/itm/314015851059
Order placed. Can't wait to put my 13rd in the mag.
Thank you for the order. Your loader will be shipped in the morning.
This mag loader works amazing very well made loaded my 4 13rd mags and 10rd mag easy the 12th and 13rd need a little more force when applying the loader bit once used over time mag loader becomes easier with use
Thanks again!!!
Just purchased one because I got the 13RD mag and that 13th round is impossible to get in. Hoping this will help me break in the spring a little and then make manual loading easier later on.
It came in today! So clutch gets all 13 in EASILY 🖤 thanks
Magula or get a Chinese magula knockoff.
Mine I received today doesn't work that easily. I have to push down on the forward part of the mag follower to get it the loader operational.
Hi Tom,
For a very, very new magazine, S&W sometimes needs the follower be pushed down by hand for the first round. Once it breaks in after a few reloads, the follower will smooth out. There is also a video on CZcams showing a small manufacturing defect in the follower where the ledge underneath the follower will snag on the spring and cause the rounds to be hard to load. This can be fixed by smoothing out the ledge. Hope this helps.
Richard
Here is the link to that video with the follower issue from S&W manufacturing defect:
czcams.com/video/0I6gB_U6loM/video.html
I hope this works! I'm having the same issue getting the last two I'm the magazine! Is there a return policy if it doesn't work?
Hi, yes, If you don't like it, I have a free 30 day return policy.
@@magspeedloader Okay, I just placed my order. I hope it works! Thanks
@@MzCie1 Thank you for the order. Your loader will go out Tuesday since the Post Office is closed on Monday. Also , please take a look at the 2nd method video since that one doesn't require much grip strength if you are still having difficulties with the last few rounds. Your springs will relax after a few reloads and it should get easier to load.
@magspeedloader I was looking for the second video but, I couldn't find it.