How to Change Thermal paste on Gigabyte RX570 Graphic Card
Vložit
- čas přidán 22. 07. 2021
- Changing the thermal paste on an old GPU can lower temperatures by 5 - 15 degrees, depending on the GPU and the number of fans.
Be careful! Most people don’t want to touch their graphics card, and for a good reason, that piece of hardware usually makes up 40% or more of a PC budget. Stab the wrong thing with a screwdriver or drop the GPU and you can say goodbye to that card.
Thanks for watching. Give support through social media by sharing and following.
Instagram: / chichinjo_official
Twitter: / chichinjo_off
Paypal support: paypal.me/chichinjo
Channel support donation: www.donorbox.org/chichinjo
Recording with NOTE 10 Lite.
Video editing on ASUS Laptop K555l. - Věda a technologie
Hello! I'd like to know if you'd recommend using the same thermal pad thickness or using different sizes on the VRAM and VRM chips for this specific card, and if so, what sizes do you recommend? Thank you in advance 😁
Muchas gracias, excelente video por cierto que mm de thermal pads usaste?
Nice video if I hadn't seen that you have to remove the fans first because of the 3 cables I was lost,what is the size of the thermal pad? mine are very dirty, my rx 570 is a version with backplate is it still the same?
Do you remove back plate before? my gigabyte have a back plate.
thanks
can you tell me the thickness of the replacement thermal pad you use
Nice ,good works 💯🔥💖
Thank you 🤗
My gpu back panel is hitting my ram clips and mobo plug in could I remove my back panel and be fine?
Can you tell me something about your screw drivers
Muito bom o vídeo. Aqui no Brasil nenhum vídeo explica realmente a limpeza total.
Are you using a soft or hard soleplate?
I have an RX 580, what is the measurement of the thermal pads? I bought 2 models, 0.5mm and 1mm to use, I have the Asus model
Go with 1mm 👍
The two screws closest to the IO are completely stuck and I can't even get them to unscrew a little, any help?
Well, can't help you with that. There are methods to do that, but you could find it by searching google, rather then me writing it in text form. 😅
Hello, what mm thermal pad do you recommend for VRAM and VRM. I have the same GPU as yours in the video.
Hello, 1mm pads. 👍
Hola que tal? Puse la 0.5mm y me subio a 90 de temperatura... vi tu video pongo la de 1mm q dice ahi y se me reinicia cuando intento abrir un juego que puede ser?
Can you please tell me which screw drivers you use to open GPU ??
Cross-head screwdriver 🤗
How does one remove the backplate? The heatsink blocks access to the backplate, and the backplate blocks access to the heatsink, so I'm really stuck. Great video, otherwise! Very informative.
Backplate is stuck, just put pressure because thermal paste is glued. 👋
What thickness do you need for the thermal pad of this Gigabyte RX570?
This is risponse of technical support
The thickness of thermal pads are 0.35mm and 1.5mm.
15*50*0.35mm (2pcs)
15*12.5*0.35mm (2pcs)
10.7*63*1.5mm
19*65*1.3mm
hello ! greetings in advance, I would like to know that mm carries an Gigabyte rx 580 8 gb?
Hello Pablo, 1mm 👍
I have that GPU rev 1.0 with Gigabyte and Fan Stop RGB Lights,what thickness is all thermal pads used?
On ram you need 0.5mm pads and for MOSFETs 2mm :)
@@Chichinjo i have paid for Mosfet and vrm 1.5mm,because some websites Tell it's correct,i'm wrong?
Well, you can either send an email to the manufacturer or relay on info from the websites.
@@Chichinjo i bought 1.5mm for vrm and mosfets,because same fóruns and sites tell that...
Im wrong?
Missing the backplate
After changing mine. I got higher temp bro.. any recommendations?
Check if you have screwed all screws, especially at GPU place. 👍
Thanks for the tutorial, reassemble back my GPU but my temps ramp up straight to 89 Celsius when I boot up my game 😭 I replaced with Cooler Master 1mm pads and thermal paste mastergel v2 pro from cooler master as well.
Will try to use 0.5mm pads in these couple of days 😞
Check the losens screws on the gpu. That knows to ne the issue 😅 You welcome 👋🤝
Hi everyone. I've swapped with the 0.5 mm pads for the top, right, bottom and left (there's a small square thing idk the name) and it works fine now. But I think it's best if you guys used 1mm pad for the bottom die because when I placed the heatsink the pad moved a bit loose. Not sure my mistake or the thickness.
Use Arctic MX 4 always, cooler master is good but dries in about 2 years.
Nice video but a bad idea to use a toothbrush on electronics because of static electricity. Buy an anti static brush made for electronics
Can I put thermal paste instead of thermal pads ?
Well, yes and no. I wouldn't do that. 😅
What mm and bran thermal pads do you recommend sir.Thanks
1mm, thermal grizley 😊
Arctic also have great ones. 😅
is 4w/mk conductivity pads enough on rx 570?
Yeah, it's good. 👋
@@Chichinjo oh thx ill change mine later, i dont see anyone use the pink pads (which is usualy 4w/mk) so super thankyou for your reply
You welcome 😉
how much difference in thermals occurred after this.
Idk it was long time ago, but 5 C° at least. 👍
MUCHAS GRACIAS ME SIRVIO DE MUCHA AYUDA!!
Very help thanks i have gigabyte rx580 8GB it is 100% same like gigabyte rx 480
You welcome 🤗
I will be attempting to change the thermal paste on my Gigabyte RX580 8GB Gaming soon and hope I won't need new thermal pads because I didn't think to get any. Wish me luck!
Good luck @dynodope 👍
Did you put 0.5mm thermal pads in the vram? plss reply asap. cause i want to change my old thermal pads to my gigabyte rx 570. btw we're the same gpu 😊
Yeah, you can put 0.5 mm. GPU brothers ❤️
thanks for the reply man. Thankyou! 🤗 now im gonna buy a thermal pads.
You welcome, and go easy with cleaning. 👍
@@Chichinjo did you use any 1.0 pads or was it .5 pads everywhere
Idk, it was long ago, I think it was 1.0mm.
I have a Radeon Rx 570 4gb but the fans stopped working. I was thinking about changing the heatsink and fans to a gigabyte fan and heatsink. Do you think it will line up and fit the same ?
Well idk, they must be the same, in terms of fitting gpu, memory and power modules. 😅
Thanks I'll find out more. Is the fan speed on the gigabyte model adjustable ?
Well, if it have 3 cables united, than yes. 2 cables are for power and one is for fan control.
And you control fans either by graphic itself, or with software like afterburner.
pad thermique of mm? pliz
1mm 😁
1mm for the whole video card?
hey what thermal pads are those?
Hey, not that good ones. Gamebird thermal pads, 0.5 mm i think 🤔
Ok thanks
@@Chichinjojare you fucking serious? Some comments you are saying 1mm and some places you say 0.5mm. I applied 1mm and it shoots up to 90 degrees now.
On memory chips, or graphic overall?
Seven words to make algorithms love you.
VRAM / 0.5mm
VRM / 1.0mm
easy
dont do this if you are a woodcutter XD Dude dont use a toothbrush on the board! its too harsh and can cause damage! use a soft paint brush to remove dust etc and a pipette for the therma pad leftovers.
I realy don't know how many laptops I have opened, and all of them was at some point cleaned with tootbrush, never demaged anything. 😅
@@Chichinjo meaningless anecdotal evidence aside, using a brush on components like this is a really good way to knock off capacitors, resistors, etc. and kill a card.
If you are not carefull enought, yes. 😅
@@Chichinjo Notice the large amount of LGA motherboards out there with damaged CPU sockets, a lot of people are ham handed.
Yes its all relative to how bristle your brush is, to how strong your hand is... Of course caution and accuracy is required.
this is horrible :(___
what is a thickness of termal pads on that gigabite gaphick card?
1mm thermal pads, I recommend Thermal Grizley pads, or cheaper Gamebird...
This is risponse of technical support
The thickness of thermal pads are 0.35mm and 1.5mm.
15*50*0.35mm (2pcs)
15*12.5*0.35mm (2pcs)
10.7*63*1.5mm
19*65*1.3mm