DIY Cable Railing Installation
Vložit
- čas přidán 3. 06. 2024
- This DIY cable railing installation tutorial is all about how to install a wire railing from start to finish. This railing remodel shows the step by step process of a complete railing renovation using a Viewrail stainless steel wire railing system. Bring Your Own Tools (#BYOTools 176).
Apparel List:
-Georgia Boot (20% off with "BYOT"): bit.ly/395WxO6
-BYOT Shirt: bit.ly/36tsgE0
-Knee Pads: amzn.to/3y2T0XT
Material List:
-6" Power Pro Lag Screws: amzn.to/3Xds9p7
-3" Power Prow Screws: amzn.to/3OnXIbJ
-Shims: amzn.to/3Ohp5Es
-Viewrail Angle End Post (Qty: 2): bit.ly/3iiDcgY
-Viewrail Angle Line Post (Qty: 4): bit.ly/3u2dpMw
-Viewrail Level End Post (Qty: 2): bit.ly/3AOKHTc
-Viewrail Level Line Post (Qty: 6): bit.ly/3F0oOTk
-SS Cable Wire (400 LF): bit.ly/3GMwlq0
-Wood Finish: amzn.to/3EBVoJP
Tool List:
-Digital Angle Finder: amzn.to/3Ax3KRF
-Drills: amzn.to/3V7aFcp
-Chop Saw: amzn.to/3XtDulf
-Tape Measure amzn.to/3hrUYeG
-6' Level: amzn.to/37ZgT7x
-Small Level: amzn.to/3H5SKwV
-Sander: amzn.to/3EBgS9x
-Shop Vac: Shop Vac: amzn.to/3Xu2Uiu
CHAPTERS:
0:00 - Intro
0:47 - Railing Post Install
3:40 - Walnut Handrail Install
10:18 - Cable Railing Installation
12:28 - Finishing Touches
13:53 - Finished Product
MUSIC:
-Venice Beach: Topher Mohr & Alex Elena
-Pata Pata: Miriam Makeba (Matt Cherne Remix) www.chernebeats.com
#byot #diy #howto - Jak na to + styl
Nice project! Love the combo of the walnut handrail with the black powder-coated posts!
Seperior craftsmanship, that really opened up the area and looks very sharp.
Brent, I love your videos and the final outcomes. I feel as if you are talking directly to me when you do these projects!
Beautiful rails,GOD BLESS
What a transformation, nice job!!!
This is probably one of my favorite projects you have done, awesome job!
Love hearing that James. Thanks so much for watching and all the support.
Love it !!!!
Thanks so much for watching Leah. glad you enjoy the final product :)
Looks amazing as always! Thank you for the video!
Oh wow Im jealous Brent! Thats an amazing transformation. Mines are in wood but very old 1998 look. In Canada we cant install horizontal railing because kids could climb it, so the vertical posts or glass panels is about the only choices.
Great project as always and hope to see another video soon.
yes, huge improvements.
Fantastic job!
Absolutely beautiful, I came here for the cable rail system & I think I'm sold, I was going to go with the HAAS Cable rail system but I just may have changed my mind.
......and after writing that last comment I priced it out on their website, aaah no thanks too damm expensive.
Amazing! You make it look so easy!
Thanks so much for the kind words and the support John. The beauty of video editing. Always makes it look easier then it is but hopefully it helps my audience in order to actually make it this easy :)
Amazing transformation! That new railing opened up the space so nicely! Great work as usual!!
That turned out nice man!
That is stunningly beautiful! Almost--ALMOST--makes me wish I had stairs! Sadly, my ruined hip joints and spine won't let it happen. Oh well! I'll just admire these ones from afar. :D
Thanks so much for watching and the kind words. Glad you don't have to worry about stairs in your own place. The beauty of the railing isn't enough to sacrifice your health for it.
"experience true level" - I caught your easter egg. Good ol' Rick Sanchez ;)
Looks good but needs the pass throughs on the posts for the cable to finish it off.
Railing looks great! I’m from your area and I was wondering what the specialty lumber store was called. I really like that walnut
Excellent 👍👍
My favorite style of railing but is against building code here in canada. Kids like to climb it and fall off the other side.
Looks great! Question though, how does the height of the stair railing feel? Since you added the wood blocks, it’s raises the height of the railing 5-6”. So with the 36” height of the posts, that puts the total height to around 41-42”. Seems kinda high … thoughts?
Hi, from where did you buy the materials? (Posts, cable, etc.)
thanks this si what i was trying to tell my wife idk if i like it or not gonna try
@BYOTools , what's the flooring in this video. It's beautiful.
That looks amazing. How much does a project like that will cost?
It looks great, but I have no trust for those screws and that structure. railing posts and fastening are under a lot of stress and nothing there gives me any confidence based on failures I've had to fix.
I feel if you felt this structure you may be singing a different tune. Extremely solid and I have zero worries long term. Unless someone takes a sledge hammer and a reciprocating saw to it like I did I think we will be ok. But will make sure to let everyone know if issues occur down the road. What failures have you seen in the past? Where they with posts like this one? Thanks for watching and your support in any case.
I know @sylvan_db ‘s feeling. If you watch videos from “finish carpentry TV” or “insider carpentry” the newel posts I’ve seen them install on staircases were buried all the way through the staircase or they used super long 3/4” or 1” threaded rod and those suckers didn’t budget one bit
@@BYOTools Usually the issues are caused by using screws or lugs into pine/fir to fasten the post. They loosen up over time. The fix is thru bolts but even those loosen up as the relatively soft wood compresses so it is necessary to retighten as they do in order to prevent outright failure. Fixing posts like yours with a screw from the top and no lower access, I've had to drill out for a 1in hardwood dowel for each screw. Hardwood (preferably maple) keeps screws tight longer and can be retightened more times before needing replaced.
What a transformation, it looks incredible! 👍 How much tension do you put on the cables?
Good questions Brian and its a bit open ended based on preference. I did it by feel and as long as it felt taught we were good to go.
Looks great but the price is astronomical. Anyone know of a better value system?
they also cover those welds
Where can i buy the crimp fittings????
Could you please tell me how much did you cost for the entire project. I mean just for the stuff.
Where did you buy railing
How well does the wood glue adhere to a painted surface? I'd think you would want wood to wood with the glue.
Gorilla extreme Construction adhesive would have been better
Fantastic work. What is the overall cost
Not sure if I missed it, but if you are cutting the other end of the wire at 1.5 inches how do you crimp it ? I was thinking it wouldnt extend out far enough
Crimp the fitting then thread it thru the post. The fitting extends past the end of the wire.
@@Sylvan_dB Oh ok thanks, so it can push thru the post hole with the threaded piece on it ?
@@lawrenceporter7753 yes, then a cap is threaded on to hold and tension it. If cut too long, cannot tension so must cut off the end and crimp on a new one.
@@Sylvan_dB thank you
How much would be for you this to my house
What’s your favorite go to brand of power tool?
can't do that railing in Canada, not Code compliant
What did this cost you?
Wondering.why the steel posts are 2.5 x the cost of a 36" steel post for vinyl All of the rail system manufacturers seem to have fixed the price.
My advice is just cause this guy can do it doesn’t mean you can from my experience
You could've used some basic trigonometry to figure out the angles for the post caps.
You could have done less runs with a wider gap while ensuring safety.
🙏👏👍💪
Thanks for watching as always Alain.
@@BYOTools what brand cable receivers / terminals did you use? I can’t find ones this shirt anywhere and longer ones don’t work with angled installations…
NOTE: install this only if you are single, no kids or they are grown ups.
Love to hire contractors that has O.C.D.😅😅😎😎
This wld not be legal in the UK as it gives kids a ladder to climb over lol
Interesting Mark. Does that mean in the UK they only allow Vertical slats and nothing horizontal? Thanks for watching.
Salve parli italiano
Those wires are gonna look super dated in no time. 👎
View rail is as ugly as they come. They provide cover plates to hide those disgusting welds. Hope that the powder coat isn't going to crack or flake. If you want a real sexy railing that screams quality...hit up AGSStainless.