AirCurve 11 Clinical/Provider Menu Settings Adjustment
Vložit
- čas přidán 27. 08. 2024
- In this video we go over the clinical settings in the ResMed AirCurve 11 VAuto Bilevel machine. If you would like written instructions on these settings you can use the link below to access a great tutorial.
AirCurve 11 Bilevel Clinical Settings:
cpapmyway.com/...
You don’t have to factory reset to get the tiMin to 0.3. Press 0 then you can press the decimal to get to .3. It’s a weird step, but easy to change.
Great input. Thank you.
How can I put the airsens11 to sleep during the day
It should do that on its own when you turn it off in the morning.
@@CPAPmyway ....if you have auto start on ...window open sometimes wind will smart start ...;-)
I have the heated hose. I set the temp to 30 deg. C. Humidity set to 6. At night it form water in the hose and it comes to my nose. I drop the humidity setting to 5 it does form condensation but the air is too dry and make me cough. I feel the hose is warm when first start but later at night is cold. I replace the hose and the same. I had S9 and i used to set humidity maximum with heated hose and it never form condensation. Why, the S11 is doing this?
You might want to max out the tube temp instead of turning the humidity down. Worth a try.
Why no auto ramp?
It watches your breath rate, and goes in to therapy mode when it senses you have shifted to a sleep pattern.
What is a oximeter
It monitors blood oxygen levels and pulse.