STAINING A DOOR. How to refinish a door. Door glazing tips.
Vložit
- čas přidán 29. 12. 2015
- How to stain or refinish a front door part 1. Instructions and tips using glaze to make a door new. Simple hacks and tutorials that make it easy to refurbish you front door. Take terrible looking door and make it look new with Sherwin Williams glaze and Helmsman urethane. Door refinishing tips and instructions how to stain a door. DIY home improvement tips including how to restore a wood door.
Watch more door staining and painting here: goo.gl/twD6Cm
LINKS TO TOOLS IN MY VIDEOS ARE BELOW.
Paint Life Gear: paintlifesupply.com
Foam brush set: t.ly/3pA0W
Respirator: t.ly/OdH2
Hyde Spray Pole: t.ly/GrXRb
3M M3000 Hand Masker:
Spring Tools Hinge Pin Remover: t.ly/vRBPA
Raven Latex gloves: t.ly/4LDa
Medium sanding sponge: t.ly/d8Da
Teaching the World to paint one house at a time!
Learn the secrets that professional painters, sheet rockers, and finish carpenters don't want you to know. We have all the household painting hacks you could ever want. Come visit my channel to learn how to paint anything and everything around your house. Why pay a painter when you can be the painter? - Jak na to + styl
Best way in my opinion, remove door, lay on work table, Sand with 80g/180/220 on the orbital, only flat surfaces, apply jasco or aircraft stripper in groves/mouldings, use steelwool, use afterwash. now you got a bare clean surface in under 1 hr. apply sherwood stain, apply vynl sealer, sand with 320, coat with General finish 450 exterior satin. let dry, sand, re apply clear.. and in under 4 hrs new door.. inbetween times do the same on side panels.. with exception of removal..work on in place. best turn over..and best finish.
Thx dude
Thanks for putting this out there. I'm a remodeling contractor always looking to up my game. I'm so surprised by the negative comments, what's wrong with these people. Nice job, and thanks for all of your instruction, and also appreciate the Bible verse references.
Thank you for sharing and for watching!👍
What’s wrong. Ex Union painter here 40 years experience commercial and residential. Own my own union company at one point in time. 100 ways to do something only a few ways to do it right.
I am learning English to understand your videos , you are so good, I am designer painter here in Brazil , and I intend to live and work as a painter in america year. hugs
Marcelo Carvalho you in America yet?
@Karol Szymon Wiśniewski -No he isn't. No one thinks he actually is. It's rhetorical BS.
@Karol Szymon Wiśniewski lol trump lost. No more wall thank goodness. And yes trump has certainly lied more than a handful of times
Hello I am Alex Painting i enjoy your videos and I have learned alot from watching you.
Thanks for being with us!
Amazing! Good job done!
That looks sooo AMAZING !!!!!! Is there anyway to get that look on a steel or fiberglass door ?
LOVE the passage ref!
Hi, I have qsn. for you. Why do you use lacquer on the door and then use a water base Helmsman finish on it. In my area S.Texas humidity and heat is te enemy of many poples fornt door. What do you think about using Wipe on poly instead then Helsmann after wards
Good job guys I live in Boise, I love your channel man
very helpful video. Many thanks
Great video...saw one of your trucks at a costco parking lot when we took a COVID road trip to Boise from California. Almost wanted to walk up and say hi...thanks for all you do...now I have to look up Psalm 135!!
Praise Jah! Praise the name of Jehovah
Question are you working on a Fiberglass door or wood door with side/lights? Is this procedure for both Fiberglass and Wood doors?
Good job.. Chris 🇺🇸
Hi- I have a question on using sher-wood stain. I noticed it is rated for interior use only- I’m assuming you haven’t encountered many issues using on exterior doors? . Any comments on this would be greatly appreciated.
wish you all the best for 2016, cheers
Great video, sanding at the begining, how much do you want to sand it down? until some of hte finish comes off or just to open the pores so the stain goes in?
just the top finish. If you sand too much you'll be removing the patina (the changes in the wood caused by oxidation and sun) and it will stain different and patchy.
I couldn't see how bad the checking was near the base of the weathered door. Would you ever consider using a wood filler for hairline cracks? If starting from raw White Oak or African Mahogany, would you bother with an oil-based wood grain filler mixed in if you were using an oil-based wiping stain on Oak or Mahogany finished with a Spar Varnish?
Can you please do,or explain the process on a how to refinish a fiberglass door that has a golden Oak gel stain.
I'd like to see you do a video on restaining a fiberglass door that has woodgrain. How do you do it without sanding (which would ruin the fake grain.)
i am refinishing all the doors & door frames in my apt. i sanded the first door, wiped it down then stained it, wiped again but its still a little tacky. I'm about to put the finishing gloss on & hope it looks gd. Now the 2nd door i got lazy and didn't sand just went straight to the stain. when i wiped it the next day, the stain was coming off. its already stained and very tacky. i can't go back & sand it now...what do i do?!?
so, you are using spray lacquer for the purpose of "bonding" correct? Because you aren't sure of previous finish? I did catch the instructional mistake at 3:08 so I'm not referring to that part. I can't help but feeling that ALL that sanding rather than stripping first and less sanding would result in a blotchy finish due to previous sun exposure/wear and ect.
Thanks for the videos. I did not see part 3 of the video. The link you posted on the upright corner is another project starting from the scratch. Where to find part 3
What if you waned to ;put a LIGHTER stain over a darker stain... would you need to completely sand to the bare wood? Also, what do you suggest to fill in cracks in the wood due to weathering
yes
Top coat is only as good as the bottom coat. Lacquer can be shaded to blend the door in to look great. However, this is an exterior door lacquer will not last outside. Even lacquer stain. Best to strip it, stain it and apply coats of automotive urethane ( 2 part) sheen of your choice. This will last.
Pshh I have a huge double door and need this done ASAP. If you ever in salt lake come though
Great video and explanation of each process. What would be an accurate quote to give someone who has the same or closely similar entry (Exterior Only)? I an actually going to do a job like this and want to be as accurate as possible when I bid it. It will just be me doing the job. I appreciate any feedback. Thank you
Watch our videos on bidding projects czcams.com/video/z3ROWk8jmJ0/video.html
Hello, Great videos - thanks for sharing! Do you have any videos on refinishing Mahogany entry doors?
What # of sandpaper did used in this project?
Cris, what about the other side of the door, how did you paint?
Most doors are fine on the inside
how long did this take start to finish (1 side)
What are the steps to staining cause im trying to learn...my boss doesnt want to teach us...what i saw he did was use lacquer to clean...sand...and then staind and added something that smelled like bubblegum then sanded again and sprayed clear...he used something called bac wiping stain and i dont know what else
I think I seen you spray laquer was that done before or after the stain? Also what's the point of laquer if your adding Urathane?
Put the cans in warm water the spray comes out better some times I've used two cans together to get a better spray pattern. Seriously wear a mask if you can find one.
Where can I find the links to video 2 and 3 ? Thank you
If it was just the door, would you have taken off the door?
Old masters best product for this job.....
Love the verse, bro.
why did you use a spray can lacquer instead of on airless?
hey Chris So when I stained a chair that I have I used a Minwax pre-stain, stained it, and used a Polyurethane. However after I finished it, it ended up being where some parts look like there was something smeared on there. Do you think the issue is that I may have not wiped off enough of the excess stain?
Possibly, I would not be able to say for sure unless I saw it
Can these products be used on a Fiberglass Door. We have a mix of wood & fiberglass between the door frame, sidelight & front door.
Also, it looks like you put the laquer on heavy. What do you do if you get a run?
Yes
Will this work on previously stained Fiberglass entry?
Hey, thank you for being here with us! Due to the overwhelming amount of messages we get each day, we have created an amazing community through a private FaceBook group called Paint Life Mafia. Join us for private live shows and much more. Only members will be allowed to enter and interact in the group, creating a tighter knit community of painters. Each tier has different perks, depending on what you are looking for. Click here to learn more about this EXCLUSIVE group and join: facebook.com/groups/2305219262837596/
Special Thanks - Chris Berry, The Idaho Painter
Hi, good video just asking, how many coats of stain, and one thing the can should not be shaken since it will have air bubbles.
Use a wide piece of metal or wood to stir.
Cheers
What's the lacquer for? Is that like the clear cost after staining it? How come u guys don't roll or brush on clear coat on the door? What is lacquer is it water based or oil based product?
It is lacquer based and it keeps the glaze from making the door to dark
What tool is your helper using to put up the paper and tape together?
The Idaho Painter
a "hand masker"
Did you sand all of the old poly/varnish off the door and sidelights before you stained it? If you don't the stain won't penetrate and it will take forever to dry, correct?
What sidelights? They're called windows.
@@age_of_reason Maybe you should actually listen to the video Poindexter. The vertical windows on either side of an entry door are called SIDELIGHTS as indicated by the Idaho Painter at 0:03 into this video.
@@simul8guy75 Maybe you should tell your kids that you met an internet troll today.
How much do you charge for a job like this ?
Actually the Rust O Leum Lacquer is a nice product
You get that buff from lifting paint cans all day? Nice video!
I think so!
Where in Idaho are you? I need my door refinished lol!
Awesome
I noticed you guys double masked the sides of the doors... Lowes sells 18" paper masking paper. I like to use the the 18" because you use less tape... u don't have to put a second layer of tape and paper to secure your walls for over spray. just something I wanted to point out
Love the accent
Oh accent? Thanks for watching!
My local Sherwin Williams paint store had no idea about the BAC wiping stain... any suggestions?
BAC is interior stain
Use sherwood
Yea, you went to Sherwin Williams
Could you just sand it , coat it with a oil based stain and repeat ,, kevin in ireland
I just recommended a interior varathane stain closest to what the customer had as possible, in coordination with a exterior oil based poly to refinish their exterior door. I forgot to recommend sandpaper. Lol I’m an idiot but at least I didn’t screw it up too bad.
Not to bad
How much you charge for a job like this
What is the difference of using spray lacquer vs brush on clear gloss?...Never-mind you pretty much answered my question in video 3
A higher quality finish
Can the door be refinished while still in use? I can't take my front door off the hinges and I don't feel safe letting my wife use the back door at night.
BBQ Jerk I see where you get your last name from.
The question I have is can you use a card scraper to remove old paint/stain?
Yes
About how many cans of lacquer did that take?
Lacquer is for interior surfaces
8 years have passed since this video. Have you learned anything new that would make you do it differently?
What are you using to do wiping stain
Microfiber cloth
I have a door that needs to be refinished like that how much would it cost to do it if I were to pay a handyman? Because I had a handyman he was saying $200 just wondering thank you I live in Southern California
Me $850
What grit sandpaper did you use?
120
Man I wish I would of seen this before we needed to completely strip the 10k door. Now we have stripper stains then I used dremel in corners boss freaked cause made grooves. Well I'm making my boss watch this.
Respirator? Lots of dust and VOC....
Ok... you taught me how to redo my front door in 2017... time to do it again...in 2022... grandpa
Glad to help
Dude gemcoat , airless sprayer , damm, bet the check signing finger was numb!lol
lol
How much does it cost to refinish a front door?
We charge 375
anyone wantIng to use a SPRAY CAN to restore your door say GOODBYE
lol, yeah that won't work
I think he was trying to say dont let someone use a spray can to lacquer your door. I thought that a little strange myself.
@@brambob9510 I kind of questioned that myself.
Instead of wiping on the stain try brushing on the stain on a light uniform way would work out a better way
......then wipe excess......
PPG Proluxe is the best product for exterior doors. Water based polyurethane is never a good idea on exterior doors, even if it’s a spar poly. Just my opinion.
I was told that you cannot use lacquer on exterior.
Im shocked that pro painter who gets paid by job and thus wants to complete the job as fast as possible, doesn't use an orbital sander.
I watched part 1 and 2 ... but where is part 3 ? Part 2 includes applying the Sherwood Glaze ... but what happens next ??
Its on the channel
What grit is a medium corse..100 400 1000 2000
staining then lacquering.
why cant you us a oil base stain ?
Crystal Clarke That's exactly what I was wondering I live in Florida and he said that he use a water based poly that wouldn't work in Florida specially with the Sun beating directly on doors
Appreciate you not using a mask to explain the work. It takes guts to work with laquer with no mask💪
I'm confused why you shouldn't strip it? Even though you are lightly sanding it, it seems that there would still be some of the previous poly on it which wouldn't take the new stain. ?? Comments please since I have two of these exact doors to do real soon.
it all depends on what look you are after and the customers budget
@@Idahopainter refinish to new, to match unweathered interior of it. I'm going to use chemical stripper. Should be fun on a hanging door.
☑️☑️
How much would one charge for a job like this in 2023? Thanks for the video. I think I'm going to DIY it.
$825
clicking on "part two" doesn't work .... "part 3" doesn't work either .... I can 't even find part 3
same here
I always go down to bare wood- you don’t . I’m afraid the stain will pick up unevenly? Thankyou.
OK
@@Idahopainter that was a question- does it pick up unevenly?
@@flowerpower3618 yes
Sher Wood is VOC STAIN... take Care
man that finish is so uneven and i suspect it was originally and that is why it had faded so unevenly. I would have got an orbital sander on this to get it back to the bare wood and start all over again as it looks terrible.
When did John Cena start painting?
lol
How much do you charge for this
$1200
What do you think about the minwax polycrylic for a protective finish vs spar urethane?
No sanding?
Not this time
I can tell somebody died in that house , If You look on the right top corner of the Video when the 2nd painter moves in to sand the door, 3-5 seconds you will see an "Orb" moving around or Flying Around in the Video.
Orb?
use and sell dust mask?says the man with lung issues!!! Safety First!! live longer????
I just stayed for the manliness
No mask bro really? I never wore hearing protection till my mid 30's and I can't hear as well. You playing with your life. Great video though!
Good idea to wear them, we don't when filming! Thanks for watching!
He just tryna get a buzz going bruh.
I thought the door looked great as is, but imma watch the video and see what it turns into
Jhon cena's Father?
this gives youtube the bad name of how NOT to do this
sprat can laquer? you gotta be kidding?
Spray-can varnish? You're kidding.
Dude, you're a good Painter. Please don't do front doors anymore. Please. I'm going to make a video on the proper way. I'll teach you
Okay, teach me
Probably the most legit humble response you will see on CZcams right there.. I do slightly agree though as I have a Refinishing business and the canned lacquer made me cringe since I know you have the proper equipment man. I’m in Phoenix if you’re ever in town I’d show you my process. Azdoorrx@gmail
When?
When?
@Jay Blue in about a month. It's hard to get good stripper Now that they took the methal chloride out
Se. Ve. Que. No tienen. Idea. Menos. Esperiencia. Para. Travajar. El estein.
Yes
yea, no need to wear a respirator when sanding old finish when you do a light job like this one, i.e. a cheap job,,,poor quality prep dude
now you are masking the glass afzrt you scratch it with you sand paper?