How To Replace a Dirt Bike Clutch Cable
Vložit
- čas přidán 25. 07. 2024
- Shop Now: Clutch Cable Maintenance
www.rockymountainatvmc.com/Sa...
Are you noticing your clutch is getting tougher and harder to pull in? There are a lot of components that make up a clutch and we want to show you how to replace and properly lube your clutch cable. We demonstrate what to look for and how to inspect the Clutch Cable. If you are experiencing some resistance in your clutch pull or feel that it is dragging and hard to pull, it's most likely your clutch cable needs serviced or replaced. Overtime they wear out and simply need replacing. Get all your Clutch replacement parts at www.rockymountainatvmc.com .
How To Replace the Clutch Arm & Push Rod on a Motorcycle or ATV
• How To Replace the Clu...
Shop Our Full Collection Of Clutch Cables!
www.rockymountainatvmc.com/t/...
Tusk Cable Lube Kit
www.rockymountainatvmc.com/p/...
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Us On Social Media!
FACEBOOK: rmatvmc?utm_...
INSTAGRAM: rmatvmc?ut...
TWITTER: RMatvmc?... - Jak na to + styl
Thank you, I’ve already forgotten what I have to do.
Got to watch while you do it
i use the old cable to pull the new one thru, leaving the tank on
Very well explained ! Good quality video, thanks for the tips !
this was lot easier than it looks and i didnt have to remove the tank
Same
Perfect explanation.
Good video very specific and informative
Thanks man. Cheers from BC, Vancouver
@604Beats Deltaaaaaaaaaa
Awesome video you earned more than 2,5k vieuws.
Thanks
Great explanation
pretty good explanation
how do i know what kind of measurements to have on the cable?
What clutch cable do I need for a trailmaster tm31x 250cc?
I have adjusted the cable on my vintage 1971 Kawasaki Trail Boss 100 (3300 original miles) but it still doesn't disengage the clutch when putting it in gear? Your video mentioned other parts that might need replacing? Any guesses as to my problem? Thanks!
are some cables pre lubed by factory?
Just put mine in a while
Ago but it’s way harder to pull compared to when I had it before
Is it same concept as on Yamaha 250 Exciter
Thank you!!!
You're welcome! 👍
My clutch lever is not engaging the clutch even though the cable is moving, help
I've replaced my cable with a motion pro and routed it In factory position and when bars are to the left no free play bars to the right alot ot free play
Ryan Wojciechowicz you might have routed it wrong
when should i change my clutch cable??
aside from it is broken of course
Before it breaks better than after.
Do you have to lube it? I don't have oil for that wd40 works for that or not?
Lubing your cables is good practice and can prolong the life and sliding action. Check out our cable lubes we sell here: www.rockymountainatvmc.com/Sales/834/How-To-Replace-A-Dirt-Bike-Clutch-Cable . I would recommend you pick up some. It's not very expensive.
WD40 isn’t lube
Greeting frome kx80/1998 from holland
how important is it to lube up your cable, i dont want to take it all apart again.
What are the tools I need? I'm going to the store today or tomorrow so I can connect my clutch myself.
We show the tools we used to complete this job at 1:20 in this video.
what if the new cable is still too tight on the loosest setting on the adjuster by the engine and by the clutch lever? i bought the same cable for my model bike
Same
Did you ever figure out to fix it?
@@ghostlystatue7933 I just took out the inner ring by the adjuster by the clutch lever which gave me a few extra mm to work with.Then tightened it all the way then adjusted it by the engine. If that makes any sense
Is it normal for my clutch lever to be loose (bout an inch) until i pull it in? First time fixing a bike!
That’s just adjustment mate
You might have to tighten it up a little bit
@@alexchapman4747 Yep tightening it up sure did the trick. Thanks
My clutch cable snapped a few days ago, I’m waiting on a new one but when I pull in the where the clutch cable attaches to it doesn’t actually engage the clutch. Should I be concerned?
Are you talking about the actuating arm that's on the engine? If the clutch worked before the cable broke, it should work again as soon as you get the new cable on. czcams.com/video/9s8FqEBONlk/video.html -Charles
I am just trying to see if there is a difference between a brake and clutch cable
I'm not sure what you mean but brake and clutch cables are different. We have a video showing how to install brake lines that I'll post a link to below:
czcams.com/video/lbaiMiEZq5I/video.html
Well im in deep shit I ordered a clutch cable thinking it was a brake cable for $30
How can i fix a stuck kick start? On a honda trx fourtrax 1986
by rebuilding your engine
What happens if it doesnt help
I have a question, my clutch hangs freely, like if I pull it in it stays and I have to manually push it out, and the clutch just doesn’t work itself, what could be the problem?
I would assume you have springs installed in the clutch basket, so maybe your rod isn't in correctly or have no rod at all?
Mine is on the side like mentioned. Is there a reason behind doing below first, lever last? I ask because that's how you explained. Just wanted to be sure
Adjusting the clutch side first allows you to make bigger adjustments so that you can do your fine tuning on the lever side to get the correct free play and to make future adjustments when components wear.
@@rmatvmc oh yeah, i had planned on putting it on* that way first..
I have a old Chinese bike not sure what routing should be done. Was replaced before but porly and I feel like that’s
Not the right way to rout it. Clutch still isn’t fitting it’s hot out and I’m grumpy 😅
My rm85 clutch cable was super easy I didn't even need tools
I got a cr 250 and when I put it in first gear it stalls with the clutch in
Castaways_fishing that’s just the clutch being too tight but it is ok, you might want to make it a little more slack, until you can shift it into gear and not stall
Sponsored by tusk 🤔
When I pull in my clutch on my kx125 in 1st gear u can't push it but when it's running it's fine
normal when engine is cold
dayne washere need new clutch plates man
My new bike came with clutch drag. It seems pretty normal. New plates could get rid of it though. I heard roughing up surfaces of the plain plates helps them hold oil and reduces clutch drag.
It’s because it’s a wet clutch and the motor got to be running for the clutch to engage
How do Ik what size to get
Enter your dirt bike's year, make and model on our website to ensure you get the correct clutch cable. Just click the link below, enter your bikes information in the drop down boxes and then all the parts that come up will fit your bike. www.rockymountainatvmc.com/
I’m inches away from where my clutch should be. Wrong cable?
This does not work. I tried it my bike, and it does not turn whatsoever to even get to it and for the break that’s already set up for it. It doesn’t pull out.
Mine frayed in half
Is it an inside joke at the office when you guys say “ Rocky Mountain ATV “N”C” ?
Just a curious bloke
Handle barst 🤨
Clutch.... cable....?
A luber tool? Fergaddsakes.
I love how it doesn’t show him install the cable at the clutch HAHAH like wtf man?
Theses guys always want to sell us something
That’s what I’m saying EVERY single tutorial I watch at some point has some magic tool or something that you “need” then I gotta figure out a way to do it by myself😂
Great video thanks. But the whole... Keep Turning your wrenches at the end made me cringe a little.
What's a clutch cable? Talk about living with old tech.
It controls the engagement of the clutch without leaking fluid or air bubbles impacting it.