Chevy & GMC Truck Headlight Adjuster Repair and Headlamp Replacement
Vložit
- čas přidán 11. 05. 2020
- Dave Welch gives a step-by-step process of rebuilding the headlamp adjusters and replacing headlights. It's great to have a beautiful Classic Chevrolet or GMC Pickup, but it's important to keep it working properly too. Find these parts and more for your 1947-87 Chevy or GMC Truck at www.brotherstrucks.com
Product Links:
1955-61 Headlamp Adjusters
www.holley.com/products/exter...
1962-78 Headlamp Adjusters
www.holley.com/products/exter...
Instagram: / brotherstrucks
Facebook: / brotherstrucks - Auta a dopravní prostředky
Thanks for the weekly video, keep them coming. 👍
Our Pleasure!
Perfect timing. I can't get the new adjusters to consistently snap into place in my 1980. They go in, but don't really snap. With the screw on, wiggle and it comes out. When you put in the bucket, very easy to pop the adjusters out. Any ideas? Thanks!
Adjuster nuts are available from a zillion different places, where did you get those? Our suggestion is that you get another set of adjuster nuts from a different supplier and see what happens. What you are describing is exactly why we do videos, so we can continually test our own offerings and make sure they work and be able to answer question and resolve issues.
I have 1980 as well, came to this video asking the same question. Did you ever find a remedy for this?
Hi, I tried a few brands, same result. But I've learned a trick from a body shop guy who's been around the block a few times. I haven't gotten around to it yet,will this summer.
Install the plastic nut, put a flat screwdriver behind and wedge out a little bit. Then take a heat gun to it just enough to help it shape into place. Should work great.
Mark
I'm having trouble with my bucket seating center. My bezel wont go on because the headlamp isnt centered. But it's more that what the adjusters will correct. Anything would be helpful.
Is it possible that your bucket isn't spun into the proper notches? There is only 1 way the bucket will install correctly.
@@BROTHERSTruckPartsTV I dont believe so. My spring lines up, and my adjusters line up.
@@williammatthews6571 Could the truck have been hit? When did you notice the bezel didn't line up?
having same problem my adjustment screws are down and to the out sides of the truck opposite of this video ordered two sets of buckets wont fit im starting to wonder if i have a different core support its a 71 so its different then the 67 with the flat headlight section any help would be great
How come your phone no longer works? Is there a new number?
Our phone number has been the same since 1995... call 800-977-2767