How to Replace Rear Power Window Motor & Regulator Assemblies 2006-2012 Ford Fusion

Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ib/1AWRG02771
This video shows you how to install new rear power window motor & regulator assemblies from TRQ on your 2006-2012 Ford Fusion.
This repair was done on a 2007 Ford Fusion SEL 3.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obzL/1AXAA00013
• 10mm Socket 1aau.to/obwE/1AXAA00017
• 7mm Socket 1aau.to/obwE/1AXAA00017
• 8mm Socket 1aau.to/obwE/1AXAA00017
• Trim Tool Set 1aau.to/oapt/1AXXX00006
• T20 Driver
• 1/2 Inch Ratchet 1aau.to/oawD/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/obwE/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obTv/1AXAA00015
• Drill
• Drill Bit Set
• Gloves 1aau.to/oaJh/1AXSS00048
• Safety Glasses
• Pick 1aau.to/oWW/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@heresy_fnord]

Great video. It's so nice to have all of the tools required before starting. Thank you!!!

[@Evilbaylo26]

That's great but how do you get the window down to get to the 2 10mm bolts if the motor and regulator is bad? That's the whole reason for changing it. If it worked I would be able to roll it down to get to the 2 10mm bolts. But it doesn't.