Una cosa que aprendí es escanear primero antes de perder el tiempo desmontando el interior de un vehículo. Reduzca el tiempo de trabajo al permitir que la sonda de potencia 3000 localice la ubicación exacta de la fuente del problema.
Thank you for sharing i am about to buy this product, but I had not enough explanation of how to use it and a personal opinion from a technician on reliability. I sure will buy one. Once again Gracias.
One thing I learned is to scan first before wasting time disassembling a vehicle's interior. Shorten labor time by letting the power probe 3000 locate the exact location of the source of the problem.
@@alexclark6884 I was thinking, maybe we just can’t see them because the cameras digital. But if you say yours is doing the same thing but it’s not because of the camera
@@bltoth1955 Correct. The transmitter can only show directions with a short circuit. ...Manual says this, and seems to imply (if not state) it's due to no path to ground to enable direction finding (if it's an open circuit that you're troubleshooting). (...For an open, directional arrows seem not so much of an issue since you can easily test along a harness to see where the open signal tone and single-led light indicator turns off at the break in the circuit...)
Just you need both cables leads connected + and - from de battery terminals it's doesn't matter if you have connected to the vehicle because the ECT3000 has the voltage from the battery with the 5v converter tracer inside
@@danielscustoms13 CZcams videos say that if the user wants to find the ect3000 open circuit... After disconnecting the car's battery + terminal... Connect the two ect3000 + - lead wires to the battery... and find the open circuit..
Great video, excellent info as I am just about to buy one. Thanks for taking the time to share. Cheers
Gracias por compartir tus conocimientos ING. Daniel 👏👏👏👏
I love mine too! Thanks for sharing!
Una cosa que aprendí es escanear primero antes de perder el tiempo desmontando el interior de un vehículo. Reduzca el tiempo de trabajo al permitir que la sonda de potencia 3000 localice la ubicación exacta de la fuente del problema.
Thank you for sharing i am about to buy this product, but I had not enough explanation of how to use it and a personal opinion from a technician on reliability. I sure will buy one.
Once again Gracias.
You're very welcome!!👍🏼
One thing I learned is to scan first before wasting time disassembling a vehicle's interior. Shorten labor time by letting the power probe 3000 locate the exact location of the source of the problem.
Thank you!! 🙏🏼
Woah tornado ran through that vehicle 😂
Saludos!!!
Nice
Thank you
Hello, were you able to find the breaks in those wires before taking out the seat and carpeting? Thanks.
Yes Alldata help me with the diagrams !! 👍🏼
What if a sin s you hook it up to the battery it's open circuit alarm goes off
I am wondering why on the handheld short tool your arrows aren't lighting up telling you which way to go. I see the red light but no lit up arrows.
That’s what’s mine doin idk if I’m doin it wrong or what
@@alexclark6884 I was thinking, maybe we just can’t see them because the cameras digital. But if you say yours is doing the same thing but it’s not because of the camera
I think it only shows the direction of a short, not an open.
@@bltoth1955 Correct. The transmitter can only show directions with a short circuit.
...Manual says this, and seems to imply (if not state) it's due to no path to ground to enable direction finding (if it's an open circuit that you're troubleshooting).
(...For an open, directional arrows seem not so much of an issue since you can easily test along a harness to see where the open signal tone and single-led light indicator turns off at the break in the circuit...)
Can you make video of ECT 2000 product
Sorry unfortunately I don't have the ECT 2000 !!🙏🏼
Wire broken test...Did you test after disconnecting the battery + terminal?
No
Just you need both cables leads connected + and - from de battery terminals it's doesn't matter if you have connected to the vehicle because the ECT3000 has the voltage from the battery with the 5v converter tracer inside
@@danielscustoms13 CZcams videos say that if the user wants to find the ect3000 open circuit... After disconnecting the car's battery + terminal... Connect the two ect3000 + - lead wires to the battery... and find the open circuit..
You can find the open circuit without removing the car + terminal... My work will be easier.. Thank you for your answer
En k parte radica yo nesesito ayuda con una excavadora
Los Angeles CA