"Butt joints with the LEVEL5 32” Skimming Blade, my new favorite!! Perfect finish every time" 🚀
Vložit
- čas přidán 8. 03. 2023
- _____________________________________________________________
🔥 The BEAT THE HEAT Sales Event is ON! 🔥
www.level5tools.com/skimming-...
15% OFF Skimming Blade Sets. While Supplies Last.
_____________________________________________________________
"Butt joints with the LEVEL5 Tools 32” skimming blade, my new favorite!! Perfect finish every time" 🚀 @Bluecollarblondie 👊 #drywall #tools #construction
Alright, give the pole back to Miguel so we can actually finish today.
This almost made me choke on a cookie 😂😂
That’s very funny…and probably true
So true. You never see her do a actual seam. Just another pretty girl looking for attention.
🤣😄🤣
Only a jackass would think she’s doing good that’s way too much mud for one seam
I got to the end of the video and realized i needed to stop looking at the butt joint and start looking at the wall. Gods plaster work is amazing.
Why make a comment like that? Idiot, respect for women.
I don't know about joint.
Almost as flat as the wall.
@@XploreAz talking about yourself?
@@XploreAz come on we don’t need to know that about your mother
Когда не высохла, всё смотрится идеально
Думаешь, потрескается?
Судя по чистому гвл, вроде не под покраску.. а под обоями мелкие недочёты вроде не так видны же.. нет?
Being an ex plasterer I was looking at the butt joint before realising I should of been looking at the model instead...
Коллега, там кто-то был?? Вы сказали о какой-то модели?!
I was looking at the butt than smoked a joint
@@eksine , на попочку ?
Man's culture
i watched the work first, then watched the girl on the rewatch
I had never heard of a skimming blade. Here I have been using the 12" knife like a neanderthal.
Sometimes... people can go Pro!?😅
Seems just as quick though hey
🤣🤣🤣🤣🤣🤣🦧
never the tool but the crafts-girl who uses it
Yep
Красивая девушка, которая что то умеет хорошо делать своими руками и что то из себя представляет- большая редкость в нынешние времена.
А что она сделала? Протянула пару раз шпатель на камеру? 😂
Лучше бы в кино ххх снималась
то есть ???? Это фиктивная золушка ???
Работа бредовая. Пока она второй ряд будет валиком катать, первый подсохнет и шпателем будет сдираться. И всегда будут видны переходы. В этом деле как раз нужно вдвоём работать. Один мажет, второй равняет протягивает. Вот тогда будет результат отличный. А так в одиночку лучше по "старинке" 60 сантиметровым шпателем, не сильно медленнее, но и спешить не нужно.
@@user-gd2qc6ib5v пхахахахахаха.. Сразу видно - специалист от бога)
@@user-pc9sl2do1v опыт, опыт, сын мой. Иди учись, или слушай опытных))
This needs the "Hello. Mr. George" sound on it.
Esa mamada 😂
I do a lot of apartment complex jobs. They never do wide joints like this and i always shake my head. My favorite is when i get the lights burning and I can see every joint down the corridors.
My clients most of the time want their home either partially or fully wallpapered. I have to be honest and tell them most of the times they need their walls plastered (idk what it's called in English) over because once the lights go on it's going to be a nightmare 😅😂
Apartament complex? I find them quite simple
This is a higher level of finish quality than is done on most rental properties and tract homes. I paint new rentals and they just do the bare minimum. The hallways are the worst.
@@placebomandingo2095 exactly this
@@TGF120 the English word is skimcoat, btw. Greetings from Canada.
Gentlemen of culture, we meet again
I still remember one of these type vids and I remember it being pretty blatant and the first comment was exactly this but the mans name and profile picture were none other than Xi Jinping. it was a laugh I wont soon forget
😂
Indubitably
“gEnTlEmAn oF CuLtUrE, wE MeEt AgAiN” blah, blah, blah… please STFU with that nonsense already!!! However, on a lighter note, I do believe that you misspelled “CREEPY GENTLEMEN”!!! So, with all of that being said, please allow me to show you the CORRECT way that it should have been written… “CREEPY GENTLEMEN, we CREEP again”!!! See there I fixed it for you!!!
#QuitSimping
#SimpsAPlenty
#ItReallyIsNotAGoodLookOnYou
#DamnYallAreSad
#GetALife
#IfYouPaidYourGirlAtHomeThisMuchAttentionThenYouMightCouldMakeHerHappy
#SimpsGonnaSimp
You're on every one of these hahaha
Поставил лайк, за фигуру и инструмент😊.))
🤫😆
Красава😁👌
За ресницы, по-любому тоже зашпаклюет их!
За фигуру лайк по-другому ставится
Вспоминаю наших девченок штукатур малярш. Они без понтов носят нормальные спецовки.
I used the larger tool she's utilizing here and completed an entire basement in a day with the finishing coat. Minor sanding, and it was ready for paint. Worth the money for Level5Tools!
The 4 footer? They work wonders
@@25thecooldude They're amazing. I finished my entire basement doing skim coats and didn't have to sand as much either.
Nicely done, I owned a drywall company for 20 years and you did that very nice.
😊I want to work along side her and learn all the drywall tricks she knows 😊😊😊
Понятно почему вы разорились😂
Руки золотые. Наблюдать за работой такого мастера одно удовольствие
She’s got the touch.
Stop criticizing, she’s obviously young, give her a year and the job will be just as good but she’ll bump it in half the time.
Good job young lady.
Simp
It’s harder than it looks folks
@@torrycole6477 Actually, it's much easier. She's making way to much unnecessary work for herself for just a joint.
Not the way she did it.
I’ve tape a fair bit of drywall but have a hard time getting them so you can see them.
A guy I worked with would slap it on there in 2 passes with a 6 inch knife. Never been able to do it like that. He tried to teach me , but
Stop criticizing?
Welcome to the internet.
My old grandad would say- Get an extra box of mud over what you need. Use that box to rub all over you. Just so you get that out of the way😂
I used to be called swamp thing when I first started finishing, everything would look flawless and I looked like I dove head first into a swimming pool of mud.
I think I just skim coated my pants
😂
Hilarious
Lol
😂
To the layman, he means jizzz.
Фигура, инструмент, гармония с обстановкой ... Лайк !!! 👍👏😊
Без бокового света всё это ерунда
@@viktordubrovskiy2638 Ерунда это без сведения кромок слоев от двух соседних разравниваний...
Sheetrocking is an art. That was cool. I’ve done enough to know I’m really mediocre at it.
At least you can claim mediocrity. I salute you.
@@whosonfirst1309 😂
Right ive done it alot over the past teen years im ok i look at my brother like a master, has skill much higher than mine with it, and then theres the dudes that do it daily, you watch them and it takes them no time and barely any sanding afterwards
Поставил лайк за то что своими руками делает
Not a bad looking butt joint
I see what you did there. Lol
😂😂
Simp
No mud needed
Oh those butt joints, i agree there not bad looking!
Tools make all the difference for sure speaking as a mechanic for 25 years now 👍😎
Who doesn't wear a skin tight black top when they're laying drywall mud? I know I do.
But nobody wants to look at your butt joint
Let’s have some cake to celebrate this accomplishment
🎂
I am in awe. Holy that is flawless! I have hated mudding and sanding. Now Im staying here for the amazing comments. 😅
Queue the 10 thousands guys all amazed by the brave and stunning woman who does a half assed job any new kid doing this after 20 minutes of training.
If I tried that, all the mud would be laying on the floor. 😂
And the amount of cracks I would have as well as a floor pudding 😂
Try it and see😅
It’s all in the consistency of the mud. She’s got considerable skills
You underestimate you powe
CZcams shorts was invaded by golf porn now it's gonna be sheetrock porn.
😂😂😂
Im all for it
At least she’s not wearing a bikini. It’d be a good idea for the next post tho. 😉
wash your brain, bro! clean.
what drywall?
That skimming blade and the fine lines of the skimmer got me looking, Awesome
After the initial tape and mud are applied I use sandable primer to the joints that way you don't catch an edge and it's easier to see the low spots (also lightly tint your last touch up coats with chalk line powder/dust, red or blue, then it's also easier to find the areas that need to be sanded.
I used to use coffee or a used tea-bag if painting white PVA onto a white ceiling (such as when re-skimming artex/a textured surface) I'd also throw sand in the first coat just to give a better key.
Absolutely perfect. That is a work of art. And the wall ain't bad either.
Men of culture, great to see you again.
@@jameslopez5652 I’m a simple man. I see butt, I click.
Shame
@@distractionb Shame for what? Not being homos? How dare real men notice a beautiful woman's body. OH NOEZ..... what are we to do?
@@jameslopez5652 it would just be nice if you would stop being a creep
Can we all just take a moment and appreciate how damn fine the Music is
Это имя девушки? Тогда да.
You go ahead. I'm still admiring the BUTT joint. 😋
@@BillyJoeJimBob28 we all know that's a might fine Butt Joint, but did you listen to the Music that was coming out of it 😋
@@dunken27 I'm with you 💯%. Has anyone figured out what that track is yet?
@@ivocanevo I lost track of everything but the butt joint.
And after 34 years of repairs and slinging mudd, I enjoy watching her work!!!!😊
😂😂😂
That looks a Hell of a lot easier on the wrist than a 14 in knife 😮
I have to admit that joint is hella clean and slicker than glass! Sanding would be a breeze
why is it such a wide area?? Don't you just need to tape it and lay down a strip of compound to cover the tape??? This is like two feet wide.
Thanks for the tip! My next job I’m just going to roll on the mud and go home
😂😂😂
Or.. just have her do it
Jimsim ... it is a good job we didn't have plasterers who looked that good when I worked on sites the houses would never have got completed ...
I think this method looks fast with excellent results. Rolling it on is much faster than with a knife if you have many to do. It also applies an even coat in a full proof way.
That's beautiful on so many levels... levels, I say.
One has to admire those that just know their stuff...respect.
Nope, this is pointless gimmick!
that's not how you do it
I can this easier smooth trowel & spatula 😅
Looking forward to seeing your video @@KybernetikSchmiede
1st time I've ever seen mud rolled on.😂
You shouldn't laugh emoji at your lack of real world experience....just get out there and see it, Slugger.
@LCon30 So, after 30 years in construction in several different geographic locations and observing the mud and tape process, where do I find this real-world experience you speak of? If this is common practice in some areas on earth, so be it, Slugger.
Have saw and have rolled mud on with a roller my entire carpentry/finish career
@@shannonelswick1that means you’re a hack
I've seen it and done it for texture,it is actually a very efficient way but i'm not sure if it is the way to go for a butt joint, i think i would rather use a mud pan and a 12in taping knife
All the professional drywall experts are commenting on her and her ability rather than showing their own work. Especially those claiming 20 years of experience.
Nothing wrong with that Butt joint
what are you, 12?
@@janicetribbiani7535untrained eye
her work is just as nice as her butt.
@@janicetribbiani7535 and what if he is, something wrong with being 12?
@@SextusHempirykI suspect ‘janice’ is here for the same reason but feels bad about it.
The joints were the second best thing in this video.
Do you have to butter the entire wall or just where the screws are?
@@jeffreymorgan5922 where the screws are, AND where the seams are, both in the field of the wall and the corners.
@@feralbigdog thank you for responding
Actually that butt joint was fine.... oh yeah the mud work too !
To everyone criticizing this method, it's perfectly valid. It's usually used in skimcoating existing drywall, but valid regardless.
So is she filling a 'hollow' in the wall? Can't think of any other reason why you'd do that?
I could watch her work all day.
The older I get, the more I’m impressed with the work. Pretty is a dime a dozen.
Pretty and skilled is very rare.
@@pyrosquid3653Nah, they're usually very skilled at "something"
Is empowered feminist??? So maybe Not, so Great..
More like 12 for 10 cents.
My favorite part of new construction is when the mud crew is called in.
Well done, you make it look easy but it takes a lot of passes with the mud to get the touch like that! I used to lay it on, pull the skimming blade, then feather the edges. it wasn't until seeing this reel that I ever thought thought to feather the edges first like pulling a trowel. Thanks for the inspiration!
I got a level 5 watching this. Both from the talented woman and from the ease of this tool. I have destroyed my walls trying to mud these joints. I need this tool.
Pathetic
😉👍
What I'm wondering from this is whether that's a single coat for the setting compound then a second coat with this thing and that's it? Fucking hate drywall.
I wish I had a coworker like that
Yeah you would always be early, leave late and never call in sick😂😂😂
You mean someone competent?
😉👍
i wish i had a wife like that
I'm firing Pete tomorrow! 🤣
Never seen it done like that. Looks like it works pretty good. Speed is not important here, just done right!
You can see every joint in the right light no matter how they're finished. It's sheetrock, not wetwall plaster.
exactly, sometimes you get lucky though@@Lugnut64052
Awesome work
Cameraman understood the assignment and delivered a solid A minus.
Too generous with that score.
@@RuudwardtJAJAJA FUNNY AMIGO !!
Butt joints for sure
@@Imdominatingwhat are you on? Are you blind?
@@Ruudwardt yes upon further review C+
I've never seen mud applied with a paint roller before, but it makes perfect sense. Learn something new everyday!
Waste of money and time
@@MHdrport the insane amount of mud she applied for that joint….
For skim coating, rolling on a thinned coat followed by using a squeegee does great.
I have done it on flat ceilings for 20 years. Roll it on heavy, follow with a 12" taped to a pole in the same technique you would by hand.
If you want to waste a lot of time and material this is the Way to go
Beautiful, the wall of course
In a pinch you can use a cut off piece of steel stud for a long blade works really well with it slightly beveled edge , you can also use a paint shield.
I could watch her videos of mudding all day long.
Haha you mean watch videos of her?
Три вещи, на которые можно смотреть вечно. Огон, вода и то как она шпаклюет
не хотел бы этого видеть у себя дома😂 валерьянку бы пил и не из-за неё, а из-за ожидаемого результата работы.
ШпаКлюют шпаКелем. А шпаТелем - шпаТлюют))
@@Akimov_Sergey, шпаклевка и шпаклевать это общелитературная норма, а шпатлевка и шпатлевать - норма профессиональная. Так что завали умник )(уев.
@@Akimov_Sergey Все это знают,но говорят как говорят! Пиривичка,знаете ли.) Скарб и скраб тоже разные вещи ,но мне казалось(в юности) ,что это одно и то же)!
Very beautiful looking and hard working ❤
Neat.... I used to use a 14 inch knife back in the day.... That's a great way of applying mud too. 🤙
11 лет работаю на стройке, ни разу не видел таких крассивых малярш😂
Это хорошо что не пьешь на работе.
В Норвегии и Швеции полно малярш есть очень красивые и одеты как маляры а не это чудо.
бывают сказочные принцессы, что теряешь дар речи))
@@ustas163rus мне не встречались...
Oh that’s a relief! I thought at first that your paint was too thick!😂
Well… definitely something was thick from the beginning 😂
Somethings thick, but it ain't no paint. 😂
yeah the paint was thick as hell
Same here 😂
こんな可愛い職人、日本で見たこと無い❤❤
Perfect form, could watch this all day
😉👍
anything to shorten sanding time, is amazing. This is such a great example of that.
eventually you learn how to keep joints flat, then it is just very light sanding .
Awesome! Beautiful work! 💯💥💫
Good job 👍
“Butt” joints 😂 yup
Probably had a cheesy aroma
@@hotfeva9843 huh?
@@Stealthmode72 he’s making a joke about your comment… saying the butt joints probably have a cheesy smell to them …. 😑
Very nice, definitely gonna get one of these for future projects! Also never seen a roller used for joints; gonna have to keep that in mind as well.
Si
I used that blade thing to cut wallpaper for this 26 years ago. I then figured that this way of doing it would be more efficient. After all, I had a bunch of kids running around and one of them I still was nursing. 😊
Can also use a mark 4 or 5 sprayer to apply the mud on all the walls and sand it with a Porter cable 7800. And have perfect walls when the sun comes in there’s nothing but perfection.
Thats great 👍
This is where the contractor wants to pay you less cause you finished the project so fast. And you answer with - your paying for my experience. Nice job.
With this one, you're paying more than just the experience....
Not true because the rest of the crew too busy watching :)
She'll be a sheet rocker in no time. Good job lady!
Это в 20 столетии поняли, что надо внедрять всё что в голову придёт, - пока не внедрили конкуренты.
I wasnt looking at the wall....not once....😂😂😂😂😂😂😊
As a builder of 40 years my only question is, WHY?
Single coat and done. That’s why.
Its probably a more efficient system, im just not convinced a couple down passes will fill voids
cause ..for a sec youll see her clinch too...best part
I don't understand.. what did she do wrong?
@@lot5953Probably absolutely nothing. Everyone just thinks their technique is superior and are unwilling to learn more efficient methods.
Wow....very much better than expected, Patch job was nice too!
Beautiful view thanks😊
Very tidy and the skimmiing is pretty decent too.
Level 5… Jayzus, nobody wants to sand THAT much.
*Skim Coat has entered the chat*
@@nekotfarmerCouldn't help myself. That was funny. Nonetheless, I Level 5'd my last client's stairway and upper library, and my original assertion remains confidently in place. Nobody wakes up in the morning, sits up on the edge of the bed, stretches and exclaims, "You know what? I think I want to Level 5-sand some drywall today".
I’d tap that
@@NorthernChevunless ur paying my 50k
@@NorthernChev I'd wager no-one gets up out of bed and thinks "You know what? That wall is so goddamn smooth". Well, maybe I would, but no-one normal :)
Super nice, I want more!
Clean work! ❤
I’d never be late to work if she was my coworker
😅 я тоже
I'd never do any work
And then people wonder why the sleazy construction worker stereotype is so prevalent
She used more mud in that single joint than I used in my entire house.
Comes to show you don't know what you're doing. Just sit back and watch her do it, trust me, it ain't gonna get boring!
You must have a tiny house
@glennoc8585 I do. 1200sq ft.
I never thought I'd enjoy watching sheetrock get mudded!😮
Yep. Perfect finish every time!
I fucking love this shit! I miss the feeling of doing a level 5 and the whole wall perfect at the end. it's a wonderful feeling looking at finished project
I prefer skim-coat plaster myself.
22 years and running, owner/ operator... I feel ya! 🎉
I thought level 5 was to skim coat the entire wall so the texture is the same everywhere. This seems like level 4 to me but I don't work in the industry.
Level 5 is the company that makes the skimming blade
@@t.j.bennett6454 Ah ok, I see the distinction now
This is a level two at this point. This is the same for all finishes. They need to pass a prior stage in order to arrive at the proceeding stage.
Any halfway decent taper would never use a skim blade in the double coat. You would split with a 10 box on 0 or 1 depending on how your box runs. The skim with a 12 box on 0 or 1 down the middle. The tight skim by hand with the skim blade. Butt joints need to be properly tapers. This on is not
@@jamiemcgavran5405 Has Anyone Really Been Far Even as Decided to Use Even Go Want to do Look More Like?
That's what your message sounds like to me.
Excellent work 👍👍
Nice work!
As a DIYer who hates drywall that was really satisfying.
No one can say that it's a prefinished seam now. You go girl.
Quisiera ver mas trabajo de macilla
I e seen your videos before and I think you’re a very talented Tape, Spackler and Painter. 🙏🏻👼😎👼🙏🏻
"The wall looks extra wally today" -coworkers
Whoever Lucky is , made a dam good choice 💯
😉👍
Thats the hardest work she's ever done in her life
Nawh, listening to tedious male comments could be the hardest job
I brought my glasses so i can hear the music very well.
There is an imperfection in the lower-right quadrant, just below the midline. It’s very easy to spot from the side view, but not noticeable when looking straight on at it.
nice beat
Love your work
Damn….. I just bought it. Smh, y'all got me