How To Fix Loose Or Damaged Drywall Anchors Like New! | DIY Wall Plug Repair!
Vložit
- čas přidán 30. 03. 2022
- ITEMS I USED:
- WET-N-FIX Drywall Anchor Repair - amzn.to/3Kaeb08
- 5 Minute Hot Mudd Joint Compound - amzn.to/3IVFTwy
- Drydex Drywall Spackle - amzn.to/3iQoBWS
- Putty Knife 10-in-1 - amzn.to/36IAHyU
- Great STUFF Spray Foam - amzn.to/3uNnkVY
- Digital Hanging Scale - amzn.to/3wOkrXQ
SHOP MY ONLINE AMAZON STORE AND CHECK OUT ALL THE TOOLS I USE! www.amazon.com/shop/genevo9
On This episode I'll be showing you how to fix loose or damaged drywall anchors like new! DIY wall plug repair!
DO YOU HAVE QUESTIONS ON YOUR HOME REPAIR OR DIY PROJECT? GET TIPS, ADVICE AND ANSWERS! BECOME A FIX THIS HOUSE MEMBER!
Become a FIX THIS HOUSE Member by clicking on this link: / fixthishouse
Please Subscribe To Our Channel! / fixthishouse
FOR BUSINESS INQUIRES SEND TO:
FIX THIS HOUSE
P.O. BOX 2511
BREMERTON, WA 98310
UNITED STATES
FOR BUSINESS INQUIRES EMAIL ME AT:
fixthishouse1@yahoo.com
DISCLAIMER:
Videos produced by Fix This House are provided for informational, educational and entertainment purposes only. Please use SAFETY precautions when following the tutorials on these videos. Viewers doing projects at their own home are doing it at their own risk and Fix This House cannot be held liable if they cause damage to their homes or injury. Fix This House cannot claim liability with all applicable laws, rules, codes and regulations for a project. Always stay informed of your local building codes! Happy and SAFE renovating!
#Drywall #Drywallanchor #Drywallrepair - Jak na to + styl
ITEMS I USED ON THIS VIDEO:
- WET-N-FIX Drywall Anchor Repair - amzn.to/3Kaeb08
- 5 Minute Hot Mudd Joint Compound - amzn.to/3IVFTwy
- Drydex Drywall Spackle - amzn.to/3iQoBWS
- Putty Knife 10-in-1 - amzn.to/36IAHyU
- Great STUFF Spray Foam - amzn.to/3uNnkVY
- Digital Hanging Scale - amzn.to/3wOkrXQ
this is what I call a very good educational channel, no BS, no empty talk...THANK YOU!
Thank you so much! Means a lot my Friend! 🙏🏽😊
Exactly.....no life story or trip to the store...straight to the point...great
its all bs, sorry
I just bought the wet-n-fix and used it yesterday! The only problem I had was getting the wet round disc on the anchor without bunching up which was frustrating. I found it much easier to wrap the disc around the anchor dry and then dip it into water. It worked so much better! I have but hadn’t tried the foam, wood filler, and spackle yet and now I don’t have to! Your videos are great…so glad I found this channel…thank you!
Thanks for the wet n fix tip 😉
Dope tip!
Perfect, thanks.
So did it work though.has it held up being 4 months later.
Glad you said to wrap then dip!
I watched your video a couple weeks ago and decided to try the Wet n Fix product. We had a hand towel rack in the bathroom that had started pulling out of the wall. The screw in anchor had had enough. I followed the instructions and put 2 layers on the anchor and shoved it back in the hole. I let it dry overnight. Worked perfect - nice and strong with no movement. Thanks again for this video.
As a laborer here in Seattle, I AM LOVING YOUR VIDEOS!!! I just watched about 2hrs worth of your stuff.
Thank you so much friend! Means a lot for your love and support! 🙏🏽😊
Great Stuff is an insulation (draft barrier) product.
Caulk is best known as a flexible moisture barrier and lipstick for tile; commonly used at corners or edges of fields of tile. (Not to be confused with grout.) There are a wide variety of indoor and outdoor caulks.
Wood filler is lipstick for wood dings. (If you need to strengthen wood damage consider an epoxy.)
Spackle is lipstick for drywall dings.
Joint compound creates continuity between edges of drywall boards so the joints are invisible after painting.
*NONE OF THE ABOVE* replace the original wall board strength lost by a botched anchor install. Spackle may hide the hole.
The above five were designed to do something else. Our presenter included them because they are likely to be "lying around" and used in desperation. Use products in the right contexts.
I liked the way the experiment was designed and presented.
I watched your video and ordered the Wet-N Fix from Amazon. I installed the anchor this morning and waited 1 hour. It worked like a charm, Thank you for the Video!!
I’m so glad I could be of help it works amazing!🙏🏽😊 thank you for the feedback!
I just watched it, and just ordered the wt-n-fix. lol gonna solve an issue and get me out of the dog house!
Thank you so much! I happen to have some anchors that need fixing and now I know how to do it and what to use. You've made an old woman very happy!
So glad I watched this....1st time was sitting in my car outside Lowe's and 2nd time inside my warm condo! Thank you so now I can get my job done right! You rock Mr. Fix This House.
You went the extra mile for sure, great testing with measureable results... GOOD JOB !!!
I happened to choose a similar one to the first product when I messed up a wall. Happy I did.
Thanks for the other tests. Saves us all time. 👍🏾
What a great video...I have suffered with this issue for years and had to change the hole for the anchor and fill the other with spackling. This was a really nice trial in determining a fix. Thanks for a great new fix.
Just remove the plastic Molly or screw in anchors and install a butterfly or a expanding anchor , the ones that are made out of metal that close when you place them into the hole but open up on the other side of the drywall! Believe me they work I know im a handyman and fix loose towel and toilet paper holders all the time using these products
Nice. What worked for me was fast curing epoxy compound. Applied compound in hole and on the plug. Inserted the plug in wall and waited for an hour for it to turn little hard, then screwed and placed the material that i wanted to hang. It did an amazing job and the area surrounding the hole also turned rock solid. Cheers!!
A box of Fix-it--all is really cheap and the powder can be stored forever.
Your methods were well thought out and intelligently demonstrated. I truly appreciate your video/information as you've saved me a LOT of time not having to futz with garbage that doesn't work. Cudos to you! Thank you!
I ordered the wet n fix and it worked perfectly. I didn’t need to redrill and it took a few minutes to fix and secure. Thanks for the demo!
That was outstanding! Why didn’t I have this 20 years ago; how many walls I’d have saved! Thank you so much 🙏🏻🙏🏻🙏🏻
A butterfly anchor replacement maybe a better option since the hole is already big to fit the nylon anchor. Will also take less time than applying putty/glue to dry. Has more spread contact with the drywall as well.
Exactly. I encountered this recently hanging a corner shelf. I tried to repair it with putty, twice, drying overnight each time. Both failed. So just went and got butterfly clips…much stronger too.
Highly agreed, the most effective solution is a butterfly anchor.
Yup we use toggle bolts to hang strut on drywall then strut straps to run conduit on
hollow wall anchor would be better than this as well
I totally agree !!!!
I just stumbled across your channel but I am impressed with the thoroughness of your test products. I will continue to look for more of your videos. Excellent job!! Well done!!
This video helped so much! We used the recommended Wet N Fix for a loose curtain rod and it worked perfectly!! Truly appreciate how effective and useful this video was!!
Thank you for providing a fix when time is required 🙏
I always try to do it "right way" but sometimes it is not always possible.
God bless and keepthe videos coming.
You are a high quality guy with down to earth and humble attitude. Keep up the great work.
Thank you so much for the love and support 🙏🏽!
Fill the hole with 2 pack filler ( that’s filler with a hardener compound) then push the plastic plug in while still wet, then screw in when dry, job done I’ve been doing that for 36 years it never fails
What brand?
AWESOME .. This is exactly what I needed .. Very thorough video covering every aspect and thank you very much for all your hard work in posting this video.
GREAT VIDEO. Not only did you tell us your results you showed us the actual testing. Brilliant!! Thank You
Wonderful video. Perfect. Looks like I'll be picking up some WET-N-FIX to repair the drywall anchor nightmare I had yesterday. Usually I can improvise with these things to make them eventually work after many decades of marriage (!), but this one was one of those industrial pipe corner shelves; the anchors were ridiculous as were the screws, and I destroyed my wall. I'm too old for this now, but I never learn. Thank you for being so smart and helpful!
I’m glad I could be of help! And I hope you are able to fix it! Thank you for the support ! 🙏🏽😊
It looks like a plaster bandage you can get from hobby stores. You could make your own with it, or use drywall compound and gauze, or cotton wool.
Missed you trying Hot glue. I use it often. Even on ceilings to mount lamps and have had good results with it. A second method I have used for decades and know for sure that it functions well (at least with Fisher Univeral Anchors) is to enlarge the hole two sizes. Example 6mm hole to 10mm hole. Set the 10 mm anchor with the wings in the hole at 12 o'clock/6 o'clock and the 6 mm anchor in the 10mm anchor with the wings at 3 o'clock/ 9 o'clock. Screw your object fast and your set to go. No water, no mess and only cost cents instead of dollars. In such cases I recommend "always" to screw by hand. Most applictions are ruined because people use a cordless screwdriver. Nowadays people are in a hurry and damage more than they intended to repair. Just my opinion. Have a good day. 👍
Wet n fix really worked. I was very doubtful, but still optimistic and it did work. Thank you for sharing.
Amazing video! I just fixed my toilet paper roll holder and this saved me so many shoddy solutions and failed attempts. Literally took 5 minutes! Thank you!
Thank you! The last time I had a wall anchor tear out I ended up demolishing my house and rebuilding so I could install new anchors. It's worked well so far but in hindsight your method would have saved me over $400,000. I'll definitely try it next time!
Yeah I did the same thing when I accidentally shot a pin nail through my roof. My neighbor told me I probably could have saved a buck or two by putting a little tar on the hole but pffft what the hell would he know about construction? He's just a brain surgeon!
Funniest comments ever
YOOOOOOOOOOUUU IDIOT! All Ya' Had to do was flip the drywall so the hole's on the inside of the wall! GEEZ!
That’s why I avoid all anchors and gamble on just screws
Great Video as Usual. On this one you saved a lot DIYERS from a lot of wasted Time and Expense, by showing us, what works and what doesn't. Thanks for these Wonderful Videos.
Thank you so much for the amazing feedback! I really appreciate it and it means a lot as a content creator 🙏🏽😊😭
@@FixThisHouse You earned the praise with your Great and Informative Videos.
Found this video the other day and tried the Wet-n-Fix. It worked EXACTLY as in this video. Perfect fix for a loose metal drywall anchor. Thanks. 2 thumbs up!
Thank you for this!! I had drywall mud, expanding foam, and caulking, and I was all set to try one of those. Now I know not to bother and to just order some Wet-N-Fix, a product I'd never heard of before.
Many thanks - enjoyed the way you presented this!
Made me smile too, watching a guidance video about repairing holes in walls right thru to the end - impressive!
Not sure if I can find wet-n-fix here in UK but will give it a try
And as people say in comments, solution used in conjunction with a butterfly type fixing for a heavy item etc.
Best, R
I usually use a butterfly or sometimes a toggle type anchor if the hole accidentally becomes to big. Works really well. You may need a washer at times with the toggle style.
Exactly! Total agree1
It's "too big" not "to big"
Can you send me a link to what butterfly ones you prefer/recommend? I have a job today in a customers home with shelving. Hope you can send it soon! Thanks much !!
Metal butterfly anchor with washer would do the job instead of using any kind of compound based fixes.
And it would take 5 minutes to set up.
Unless they cant be used for whatever reason.
The toggle bolt is a permanent fix.
I got the wet and fix and it worked spectacularly! Thank you
Thanks for this video! I work at Home Depot in the Hardware Dept. and I get asked how to do this fix. My store doesn't have the products, as far as I know, but I'll check it out, and definitely recommend them.
I have had the best luck with Molly bolts. Especially when it comes to hanging curtains where people are constantly tugging on them to open and close them. If there is a 2x4 behind the drywall that’s the very best as you can use a normal screw without an anchor and it will go right into the wood and never come loose.
Thanks for posting this video. I've faced this problem in the past and didn't know how to fix it. This info will come in very handy for me. Thanks again.
I’m glad I could be of help! Thank so much for the love and support! 🙏🏽😊
Excellent DIY video! Thank you for taking the time and making this annoying job easy for us! Well done.
Thank you for this! I was able to fix a loose anchor with the 5 Minute Hot Mudd Joint Compound and it worked great.
When fixing into drywall (known as plasterboard here in U.K.) I like to “paint” the hole with white PVA adhesive (water based wood glue) mixed with a little water to make it more fluid. It will soak in, harden and reinforce the area. I also coat the fixing itself with PVA. This effectively bonds the fixing to the board and gives it a lot more strength. I use the same technique when assembling flat pack furniture, which is usually made from wood chip board. I paint the edges and corners with it to strengthen them and coat the screws with PVA.
Thank you so much for sharing this advice to the community! 🙏🏽😊
Indeed I have used that on plasterboard, My biggest problem is replacing 5ft light fitting to ceilings guaranteed the old screws are stripped never match up and you end up with a mix of plaster board studs and sometimes metal joists.
Great tip!! If people did this regularly like you, I bet there would be a lot fewer situations for people to fix.
But would the wood glue not leave a very smooth surface once it is dried on the "painted hole". And it would be hard for the next layer to bond to that smooth surface? PVA is essentially plastic, isn`t it?
@@el_micha It’s not a problem. If you overdo it and PVA glue gets on the wall you can wipe it off with a damp cloth. But you can also paint over it; in fact I have used watered down interior grade PVA to prime the surface of a newly plastered wall after it’s dried, before applying emulsion paint. Interior grade remains slightly water soluble and it will bond to itself. There is an exterior grade PVA, which is definitely waterproof and I would be more careful with that.
But my tip was to paint the hole and the fixing put in.
To hang my curtains that kept failing, I used the wood filler and it worked perfect. I use toggle bolts wherever possible but for the curtains, it was cement behind the drywall so couldn't use that. As other people have said, I think the problem here is you're putting the anchors in while it's still wet. If you wait until the different putties are dry and THEN re-screw in the anchors, I feel like it'd hold a lot better. Very cool video though.
cement behind the drywall... Just grab a masonry drill bit and a regular rawl plug and a longer screw, that would be very secure.
Failing that you could fill up the hole with drywall adhesive, let it set and that would give you a very strong substance to put your plugs into, make your plasterboard more secure, as well as seal up the hole.
Hi. QQ.
Did you apply the wood filler the same way he did in the video or did you apply the filler first, insert the anchor...let it dry..and then the screw?
Many thanks! I'm beginning a large home project and I believe you just saved me MANY headaches!!
I’m glad I could be of help! Best of luck on your renovations 👍🏽😊🙏🏽
The trick is to use a "sock" over the filler. It is this mesh that gives strength - you create a composite. So you can use a bandage or pieces of foil. You put it in and push it with a bigger pin, you push the filler in and then you move it back a bit so that a bigger bubble forms at the back. Only later a pin with a small diameter
That makes sense that that's why the wet n fix worked so well
Really excellent video. Thank you for showing the product comparison. I never saw Wet & Fix but I am going to buy a package. Great - informative video!
Thank you for your awesome feedback! 🙏🏽😊
Very helpful! Buying Wet and Fix for my husband!
Great info and test for a common issue in drywall homes. Many thanks for sharing.
Great job! Very well thought out and thorough. Keep up the good work!
Thank you so much! 🙏🏽😊
Great job. Appreciate all the work that went into this. Super helpful!!!
Do not follow his instructions to the letter, this is by far the worst method you can use, in a case where the hole is too big for your old anchor, take a spring toggle bolt anchors, your installation will be more solid, less waste of time and money.
@@foxgood How is by far the worst method? Where's your video demonstrating this?
Wet an fix . It works a treat, I had a radiator fall off the wall in the kitchen it was a nitemare dealing with plaster board etc . Cheers the channel is great 👍
I like these tests. Shows just how much some of those products hold up in real time
This is a fantastic video man. You did this just right, but giving and showing the options on a demo board. You just earned a sub from me, and thanks for showing me exactly what I needed to see to fix the curtains!
Thank you so much Loren! 🙏🏽😊
@@FixThisHouse no thank you. I think I might repair a lot of stuff thanks to you. I'll spread the work my friend, thank you 😊
God bless you for this video, I needed this
Edit After one month
based on this I used wet n fix and the results are awesome it has saved me lots of money. I am using it for metal shelving and so far they are holding it really well with all the weight
I bought some really bad quality wall anchors and they all broke, I initially thought there was something wrong with the wall but it was not the case. After ending up with lots of holes in the drywall I was about to add the rail system costing over $200 I saw this video bought good quality anchor used the same holes with WETNFIX and I am very happy with the results so far
U managed to insert God into the the daily conversation
@@cemasti4524 I am just wishing him or praying for him, this video has me saved lots of money and hassle
@@cemasti4524 You managed to find and complain about God out of all 1,727 comments. God bless.
I normally use the stay in place toggle bolts. I have changed 100s of these of the years because my kids always hang on stuff and loosen the dry wall anchors. Thanks for sharing another option.
Thank you for sharing your method!
Bro! You did a fantastic JOB with this production! Excellent! Thanks!
Excellent presentation. Your experimental model showed that Wet n' Fix is the right product for this type of job, which I have encountered several times in my DIY career. I have a number of bathroom fixtures that need to be reset. Thanks for providing the solution to my problem.
The answer is of course, never, because the failure suggests that drywall plugs aren't an adequate solution to my mind. But alas that is a more professional mindset. If I wasn't going to do it properly, i'd just put a big plywood plate over the hole and screw into that, well bonded or screwed to the studs. If I'm doing it properly, i'm taking the plasterboard out and putting in a plywood back and putting a fresh piece of plasterboard on and getting it reskimmed, painted, and then going straight in with a regular screw.
@@carbon1255 what if you just wanna hang some $5 paintings
I would use 5 min mix let it dry and then drill the new hole. Those are the same anchors that I like to use however when they fail I opt for toggle bolt anchors since they require big holes
I use the metal screw in anchors, and they have stayed in the drywall for a couple of years. This was useful information for what not to use. Thanks
Mate, I've been a builder for 35yrs, I've never used fillers, bog or sealants of any kind to anchor in loose screw plugs , as they won't sustain the weight over time, I always use double screw in wing toggles in situations like this, as they have a greater anchor area of hold
If it's a low load, like one side of a towel rack like I had, just shim in a toothpick or two and break them off flush with the wall. They shim the extra space enough to let the anchor to grab and expand enough to hold onto the hole.
I found that the 3M reusable mounting tape around the anchor works great. I don’t know how strong it holds but it worked for my floating shelf.
Nice! Thank you for sharing! 👍🏽🙏🏽😊
tapes or glues will often do a better job generally for anything load bearing than drywall plugs - they are designed for light sheer loads like a small picture frame at best. A shelf could do with a decent bit of plywood behind it, or failing that spreading the load across the drywall with some kind of bonding agent - or a hell of a lot more screws than it failed with.
Surely though with the floating shelves, they are on a long plate- could you not just find the stud and screw into that? floating shelves put incredible pressure on your walls- that is the best way for them, you can drill some screw holes in the mounting plate usually with no issues. I'm pretty sure ive never seen a floating shelf instruction manual recommend you mount it with drywall plugs to be honest.
Just wow - you beat all. Excellent video, great testing, great information. No wonder you have almost half a million subscribers. Awesome!
This was so informative. You sure saved us a lot of time, frustration, expense, added trips. Thanks so much
as a handyman I would not use any of these but a toggle bolt instead
holds better and no waiting when you need to get the job done and it's time sensitive you don't want to waste with patching
Hi mate do you know of any handyman forums I could join as a handyman myself
@@hexboxx735 no idea
I've had luck with liquid nails but it's probably not for every application. If I may offer a tip: I like to make an X on the surface so that I can align the loose anchor into the right position using the lines to bullseye the anchor center. It sucks to go through all this trouble only to find the patch is worthless because the bracket (or whatever) doesn't line up with the repair. Cheers!
This was suprer, super helpful. Thank God for people like yourself giving your time to keep CZcams so informative. 😉
Thank you. Saved me a lot of time and energy. I'm upset that the contractor didn't put in wall anchors to begin with.
Great vid ! I was actually looking for a solution on this few days ago …. You made my day 👍 awesome
I’m so glad I could be of help ! Thank so much for your support! Wish you the best! 🙏🏽😊👍🏽
Thank you, this was great for those household jobs, where I need this sort of fix, very informative!
I’m glad I could be of help! 🙏🏽😊
I used the wet-n-fix after watching this video and it worked perfectly. Thanks so much for this vid!
I used wet n fix before seeing your video. I’m glad it passed your test and was number 1! Worked very great for my application too
I’m glad I could be of help Lee! Thank you for the love and support! 👍🏽😊
Love the channel. Very enjoyable to watch and I learn something too.
Thank you so much for the love and support! 🙏🏽😊
The test that each was subjected to was shear force. Not sure that it would have yielded different results but it would have been good to independently test each under tension. It stands to reason that if the filler is at least as strong or stronger after curing, than the parent material, that the resistance to both shear and pull-out would (to a point) be a function of the contact area between the filler and the surface area of the parent material. The larger the hole, the better the result.
yeah...I don't think we need to do any of that. Wet & fix is the way to go it seems no reason to use anything else other than hot mudd
I never try to reuse a blown out hole. I fill it in and make a new one. Gyprock is a pathetic material. I really hate it, nothing but trouble.
Good comment!
@@martinvanburen4578 Yes, your'e definitely correct on that one. Wet & Fix is obviously the way to go.
That's a pretty cool idea on a quick fix; but I would recomend using an easy twist self drilling anchor for sheetrock and using the others for solid surfaces.
this channel is very good. thank you!
A no mess solution would be to use a toggle bolt in the existing hole. Works great!
For the wetnfix method, if you put the wetnfix covered anchor into the hole, could it potentially cause mold in the drywall?
Thanks for the video. Bondo All-Purpose Putty may be another option to consider.
Of course most of the anchors that you battered up will fail as you've restricted the flexing motion of the anchor by the product you used. Probably would have been best to fill each hole first with the different products, wait until they dry then re-drill the hole and try the anchor again.
A method known as "doing it properly". I've no idea why he thought this was a good plan. Basic misunderstanding of how the anchors work maybe?
@Jack Scorpion - I don’t think you’ve thought that through. Consider the mechanics involved in redrilling a patched hole only millimetres larger that the drill bit. None of the filling compounds would have the physical properties necessary.
@erikjonromnes - possibly so however out of all the options tested the first was really the only option with even some of the basic characteristics required to be successful. I thought it amusing that he would even consider bothering to test most of them!!
@@Anthonykelly-eq4pf instead of strawmen, strawrepairproducts.
Those products aren't drillable . That would not work .
Just use Molly type fixings in plasterboard full stop if you intend to put the fixing under any strain. They are metal anchors which you expand in the board with a pair of special pliers. They will take 50kg or 100lbs per fixing.
Yep. I also already tried almost all these methods, and the wet patch was the only one that held up. I even had to use 5 of them on one anchor (a 3-year-old tried to do a pull up on my towel rack).... And after the fix, it's as strong as it was before.
thanks for the advice
Hot glue in the hole and over the Anker , fill the hole by twisting the Anker I'm place .works great.
let it harden 5 min and your good to go.Very robust and solid.
I've wrapped the anchor in a few layers of toilet paper and then wet it with either wood glue or water and corn starch. But I was in a hurry to do a quick cosmetic repair rather than do it the right way when I used those methods.
By hot glue do you mean regular glue gun?
Thank you for the video. It was exactly what I needed to see before attempting my own fix.
Thank you for watching! I’m glad I could be of help! 🙏🏽😊
Thanks!! I came across the Wet N Fix when I was googling and wondered how well it worked!
I'm impressed with your testing, thank you
Fun video to watch. Most of these fixes were easy to see that they wouldn't work, but I can see inexperienced homeowners trying each of these methods.
which one works
@@ProPrince, Generally, your butterfly anchor, although it requires a bigger hole.
S dcrew-in anchor is good in standard applications, where not a huge amount of force is hoping to be placed on the anchor.
A stud is always a great place to secure ftom.
I recommend using an anchor that is wider in diameter to fit snugly in the large hole that you made. It works every time.
Don’t fight with getting those compounds to work for installation or even worse risk them failing long term if used to hold heavy items like mirrors or shelves
Not always possible because a wider anchor quite often also needs a bigger screw. The thing yuo'll connect to the wall must be ready for that bigger scres.
(I use in this case mostly a (big) hole filler...but that's in a brick wall. And that holds perfectly. (Not sure if that's for sale all over the world).
Exactly wile your in the store just buy the fatter fixing ffs
The only thing to hold weights over 10 pounds is drill into stud or use butterfly anchor that flips out and grips the back.
Well of course that would be the proper way to do it but this guy doesn't make money if he shows you a solution that easy or that appropriate
@@reiniernn9071 sure it’s possible. It’s called a Molly. No bigger hole or bolt
than this (Mollys use bolts not screws)
Absolutely the answer I was looking for!! Thank you so much for doing this very thorough test. I will look for this product at my Home Depot tomorrow! ;-)
Thank you for the vid. I got some of the Wet & Fix last week to fix a blind. Putting it up today. I'll report back later to tell if it worked
I like that he tested 10 different ways. I wouldn't have done it any of these ways but it's still nice to see.
Best to avoid this situation to begin with by using the "Toggle" plastic threaded anchors. I usually pre-drill through the skin with a small bit, especially if there is layers of paint on the surface. I've never had one fail. You can also get them in a shortened version for walls that are attached to furring strips close to a concrete exterior wall.
Where do you get the shorter versions from?
@@qasion both Home Depot and Lowe's have them
Which is great if your the builder but what about the buyer.
@@LilacKatz12 I was referring to the buyer / homeowner
Until you need to unscrew something and replace the screw and discover your toggle fell. Go with Mollies instead from the beginning. Always.
My first point will be about drywall not being designed to hold weight. OTOH, if you must, then use a bigger anchor. They come in bigger sizes for bigger holes. You can also use a toggle style anchor, which spreads out on the back side to help with pull-through strength.
I agree togle is your best bet
I would never attempt any of these makeshift repairs, and he proves why here. Use a bigger anchor if you can, or make a new hole and patch the old one. If the hole is too big or you don't want to move the screw, patch the hole with Ready Patch rather than joint compound, and let it set overnight, then redrill the hole. But, especially for shelves, curtain rods, and TP holders, a toggle bolt is always your first and best option IMO. These things put more stress on anchors than just about anything you might want to hang, and if you can't screw into wood this is your best bet.
Using bigger/better anchors certainly works. I'll sometimes add a bit of what we in Europe call 'joint paste' perhaps with with some 'joint banding'... the hole being in the centre of all of this. (To make sure there is a nice finish but also that the anchor is able to fully grip what can often be a miss-shaped/malformed hole.) I've used this method for light fittings, wall heaters, curtain rails, toilet roll holders and even a tap supplying water to a washing machine. Close to a 100% success rate (if you let the paste dry fully).
But bigger anchors usually means bigger (wider) screws.
@@msbrownbeast ... a toggle or molly can get quite large on the back side with a fairly small screw.
Love these product tests, saves us having to buy each one only to find they fail. I wish we had the 3minute fix stuff here in our country
Thanks for your help. We're trying to do a vertical blinds repair, and the top of the window frame seems to be a main frame building metal with a layer of compound that offers limited 1/2" depth and very little screw tolerance.
For a hole that's just too big, I'd probably try a Molly bolt of a corresponding diameter first, even if it's overkill and more expensive. I decided long ago that all drywalls (13-15 mm of brittle plaster) were border cases for attaching stuff (it's not a concrete or even wooden wall), so I am sticking to Molly bolts for lifetime sturdy fixtures, because I don't want to risk a kitchen cabinet falling down on a kid grabbing some jam, or a security rail not holding my weight if I slip on the shower floor and need the support. When I hang a light painting frame, I always keep in mind that the same anchor might be supporting a heavy mirror some day when I am fed up with the painting or poster.
For larger or damaged holes, why not cut out the damaged part and replace it with a square or circle of new drywall board? You'd need to plaster and plate that new piece to the rest of the main board, so it may not work in all situations, but it's a proper repair that would probably hold better than trying to fill in the hole, especially with compounds that are not the same gypsum plaster of the original drywall.
I am actually surprised that there is no better drywall repair options out there, like one where you'd insert some unfolding back board from inside the hole, then fill it with the same gypsum plaster as the drywall board is made of, then drill a new hole once it's dry. If the back board could be 5 mm away from the back of the drywall, even better, as the plaster would not just fill the hole, but also get in between the back board and the drywall board, making the repaired hole even stronger than the original drywall.
You're supposed to join heavy objects, like cabinets, to studs, not drywall. As for shower rails, I'm not aware of anyone who has drywall in their shower! Wetwall, maybe (yes, Virginia, there IS a wetwall!), but, you wouldn't want to attach a safety rail to that either. Use studs (if you need to and are capable, then add your own studs, as I did for a walk-up porch safety rail (elderly and handicapped)), or, assuming you have tile in your bath/shower, get a heavy-duty, suction cup, safety rail. The suction cup rail that I attached in my client's shower is still holding after 3 years! Keep in mind that a suction cup safety rails are not meant to hold full, sustained, weight, for more than a few seconds (having written that, I tested my client's with my total body weight suspended off the ground, and it held for 15 seconds before my grip started hurting!).
Cutting out and replacing damaged drywall is no better than the test in the video,
because, the drywall joints can fail under the pressure.
As for your "unfolding back board" notion, that's what mollys are for, although you'd have to drill a bigger hole.
Keep in mind that hollow wall anchors aren't meant to hold tremendous weights; the more weight you have, the bigger and/or more anchors you'd need.
@@skaizun Kitchen cabinets are fine on drywalls with the proper number of adequate anchors. It's not like you have a choice anyway, there are not always studs where you need them, you usually don't know where they are located when you move into a new apartment, and even if you manage to get one side anchored onto a stud, the other side has very little odds to also be on another stud.
When building a house, kitchens should probably be fitted with reinforced dry walls on the side(s) where you would hang cabinets. Same for the TV wall in the living room.
As for the security rail, it seems quite common in renovated buildings here in France to use dry water repellent drywall for showers in private housing or hotels, as well as in some industrial wet/damp rooms. The main manufacturer here (Placo, from Saint-Gobain group) offers several types.
I also put towel hanging rails outside of the tiled area, and while they are not meant to be security rails, it's nice to know they are firmly anchored in place should the need arise.
As for cutting our drywalls when the hole if bigger than a Molly anchor, a small cut would be rather fragile indeed.. A bigger cut, from the middle of one stud to the other would be just like putting 2 regular drywall boards together. It also gives access inside where you can put 2 small horizontal studs behind both top and bottom sides to support the big board and the smaller added piece. But that's only if you can finish the piece in the same way the rest of the board is painted or wall-papered, if it's not hidden from view.
Anyway, I haven't seen the need yet, it was just me reacting to the products in the video that didn't seem adequate or safe for the job, and trying to figure out how I might broach the matter (and possibly make an even bigger mess!) Sometimes ready-made repair kits are very useful and time-savers, but these looked more like the quick and dirty kind. Also, every decent man or woman that I know has a spare piece of dry wall in the garage, so it saves a trip to the store to buy yet another expensive gadgetry. 😄
I go to the next largest anchor. If a 30 pounder got messed up I go to 50s. It normally fills in the extra space and works.
I also like the screw-in style anchors. They seem to be sturdier.
Make a video about those if you haven’t already.
I’ve been thinking about this just recently. Thanks for sharing!
thank you! i’m currently trying to figure out how to fix my curtain rod, because my kids tore down my curtains so now I need to fix it, it will helpful helped me.