How To Make A Shop Heavier
Vložit
- čas přidán 13. 04. 2021
- Thanks a ton for watching, as things are ramping up and we’re getting
closer to being a “real” CZcams Channel, and the best way to support that
is through Patreon! Some of the other benefits include sneak peaks of what
happening inside the shop, your name in the credit roll of the video, and
extended/ educational/ ad free cuts of the videos that go on the main
channel. ( / willstelter )
Huge thanks to Jason @FireballTool for finding me the lathe, as well as bringing over his forklift to get it loaded up!
The best place to follow along with the day to day updates in the shop is
through my instagram @Will_Stelter
( / will_stelte. . )
My PO Box for if you have any cool old tools, maps, or blueprints you’d like
to see hanging on the walls (please don’t send just anything) is:
Will Stelter
PO Box 514
Manhattan, MT, 59741
Music from epidemic sound and by the talented @Ethan Harty
Editing by the talented @isaiaharnoldfilm
Website www.willstelterbladesmith.com
Just as someone else said, the biggest thing you did wrong was wait so long in between videos. Hit us with a little vlog action or some small updates. You were Alec Steele's channel for a while. Like, all we saw was you. You brought in views and made good content. You are still the same person that we like and support.
Yup. :).
wholeheartedly agree i want more updates. ESPECIALLY shop updates lol
MUCH LOVE WILL
Great to see you back!
More Will
Ditto!
In this episode, Will goes back to Alec's workshop and burgles one of his forges, since Alec is in the UK and can't stop him... :D
He couldn't anyway, he's just a small man after all... :D
Or maybe that's what he won in the divorce?
The question is how many consumables like abrasive belts and grinding discs did he have in his pockets on the way out? 🤔😂
@@eirvine to be honest, the way they both can beat that anvil, it would be a hell of a boxing match between them, or a double knockout in the opening seconds of the first round? 😵😵 hahahaha 🤣🥊🥊
lol
Hope you left a floater at Alecs !!!!! lol
When he said “ladies and gentleman welcome back to the workshop” from Alec’s workshop, I felt that
Time stamp?
5:35
Let's stay here......
Notice also in the time-lapse, he looks a lot like Alec as well. Did somebody say twins? 🤣
AVE at the back of my head
"That thing is so heavy we don't even have to strap it down, so that's nice"
*Sad Little Giant Noises*
Zziiinng
Oh SNAP!
Should have slapped it and said "that aint goin no where"
that's what she said 🤣🤣 . Ok, sorry. Couldn't help it.
Biggest thing you've done wrong is waiting so long between videos!
Yeah! What he said!
Not necessarily complaining though it just means that we get more content in the vids!
@@ryanconran824 not totally. It's an 11 minute video. The content in this video probably could have made 4 separate videos. I feel many youtubers fail to see how interested their viewers would be in what they consider not interesting. I'm a viewer of Demolition Ranch and the dude there made another channel called Off The Ranch where he does things unrelated to his main channel. Will is setting up a shop. Tons of people would be interested in his process of setting everything up, why it's taking so long, how and why he puts equipment in specific areas, inspecting equipment before he purchases it and what he is looking for during the inspections, etc. While he isn't forging anything currently people would be interested in that stuff.
@@cwinter90 Off The Ranch is pretty cool, I like it even better than Demo Ranch (I love guns and general weaponry, but watching someone shoot just isn't really fun for me, so I hardly ever watch it). So I support your comment. If able, Will should definitely post more vids, even if it's just about the things you mentioned, I know I'd be interested.
@Chris W I love Matt carriker lol I've been watching him since day 1 of his CZcams arrival. And yes and no, you're absolutely right he could probably be making more videos right now, and he probably could have made multiple videos with the amount of content that he got (yes) But those videos wouldn't have been as entertaining or as purposeful (in his eyes) or anywhere near as long as this one was. Also you don't know what sort of stress he's under right now and how hard he's working to get this new shop up and running and you have to take into consideration it takes a lot of time and energy to make a video, I would suspect he's also pretty squished on budget right now so I'm sure that's not helping him. But I definitely agree with you I hope he can start to have a more stable and quick upload time pretty soon, and I also do hope that he will start showing us more of just his everyday life, but I don't know if that's really what he has in mind for this channel. Either way I'm just glad he's not on some sort of giant hiatus until he gets the shop built that would suck!😂
Can't wait for the shop to be fully operational and the first project to start!
Hate it when my corners have bad vibes 😂
Keep at it Will!!!
Put a list of what you need I’d bet a bunch of us would love to help you out
I'm so glad the lathe got into the shop in one piece
Welcome back Will, you have been missed by your CZcams family
When Will mentions Isaiah: "hey, he stole Alec's videographer"
Like 10sec later: "well, I spose he didnt have a lot to film at the other workshop" 🤣
I think Isiah still occasionally takes photos in Alecs shop every now and then for the Instagram account and AlecSteelCo, even though he seems to have been poached by Will now
YOU ARE BACK!!!
Edit: That bane joke was pure gold.
Nothing better than a shop building series and some Will Stelter
Glad to see you back, Will.
One weird thing about this is how nice it feels.
Alec's channel has become a bit chaotic and over the top, which I like but I never expected to enjoy this this much more.
Perhaps because it's more relatable. I don't have a shop or anything but I want to one day, and seeing you set up your own just gives me this very cozy feeling.
Thank you, looking forward to more!
Watching you roll that lath in reminded me of when I use to help my father and grandfather store boats away for the winter. We had 3" pipe filled with concrete for rolling into the boat house, and 1" pipe that we would put under the 3" pipe to move sideways. Great video Will, thumbs up.
So excited that you posted! My husband and I have been waiting for a while!
Haven't even watched the video yet and I'm hyped he's back!
I'm 49 seconds in and same.
Keep the dog and scenery cuts coming. The dog adds extra entertainment and we want to watch that scenery change with the seasons
Me when I see a new Will Stelter video: omg omg omg it's happening! Honey! It's happening!!
Just keep plugging away at things and people will come along for the ride. I don’t know if you’re getting help on the editing of videos or not, but you’re already developing a vibe of sorts. The music is excellent and matches your more rustic location. Excellent, Will!
So happy to see you again.
First project you need to do is an automatic dog ball throwing machine to keep the dog busy while you concentrate on other projects 😀
You didn't make your shop heavier... With those new LED's, you made it lighter.
"Let me know all the things I did wrong down in the comment section, I'm sure there's plenty of them" I laughed way to hard at that. You're a good dude Will, don't let them get to ya bro.
Will, our Man, it's really nice to see you back in the saddle. And damn the music is spot on! Really nice editing! This is how I like my smithing channels. Good music, good work and goodWill. Pun oh-so-intended.
The shop is going to be huge and amazing. It's pretty obvious the dog is really in charge.😀
Throw the ball, go for rides, new stuff to sniff, throw the ball!
6:35 Will launches the ball nearly into orbit. Both thinking: Well, f...
If you start each video off like that, and we get to watch Marty age with each new video until he's fully grown, that would be lovely.
We all love you, who you are and how you do things. Just keep on doing things.
Man that’s a super cool shop!!!! Beautiful views to boot.
Your not joking. That place is a dream.
Reminds me of the lathe I learned turning on, except it had been made for the US Navy during WW2 and used an actual Jeep transmission as a gearbox... it was a Beast.
When Will unloads equipment does anyone else have flash backs to the power hammer 🔨, anxiety level 1 million
Very cool! Loved the opening shot and the dog time... keep including stuff like that.
That lathe looks like a beast!
The vaulted ceiling is the main cause of the echo, include the ceiling that to lessen the echo. Great video, continued success.
Seeing him in the forge reminded me of one of my professors.
As a young men he worked with his father re-lining crematoriums. One day his father closed the door while is won was inside.
My professor loved his father but I do not thing he ever forgave him.
Driving up the snowy mountain passes of "North America". So specifically vague. I have never heard it said that way before and it gave me a good chuckle.
The whining noise sound effect made me spit out my drink 🤣
I was beginning to think that you had forgotten us; it's been so long.
Your unique outlook on video titles is a welcome addition to the Tube..
And your editing is totally there. Just keep doing this.
Love the American Pacemaker. We had one at the plant I used to work at, and only one person knew how to run half of the machine. We used it for turning ceramic instead of metal, but the cutting feed was giving issues. I found the original manual online, and taught them how to run it properly.
And now I want one for myself.
DO IT! keep it up. you inspire me so much dood!
I was just talking about you with my buddy, then what do you know... A Video!! Awesome!
This is better than a bottle opener... 😏😎
🥳✌️
Celebrate the new shop with an awesome piece of Damascus. So glad to see you back. Can't wait for your first project.
love it Will, glad to see you posting videos.
eyyyyyyyyyyyyyyyyy!!! welcome back Will!
That's some pro grade video Will.
Awesome to see you back Will!
Happy to see you progressing! Can’t wait to see more
Yessss!! I've been praying for this day for a month!!! Lol
ME TOO!
It seems odd that alec wouldn't let you know about the free forge first before everyone else.
Great to see al the progress in the new shop!
So Glad to see you back on the tubes!
Glad to see you making content Will! Curiosity has me wondering is Alec closing his Montana shop down?
Wish you the best keep the videos coming!!! Even Vlogs from you will keep us wanting more from you!!!!
"the *bane* of my existence"
"Of course!"
Always happy to see another one of these videos pop up.
Glad to see you Will can't wait to see what next!!!!
Will and Alec forever in my heart😢😢❤️
So true so true😪😪😪
Polar opposite in mine. So great to see Will out on his own and not having to put up they irritating twat Alec anymore.
What’s wrong with Alec????
@@commonsense7754 🤣
@@commonsense7754 I agree with you. It always seemed to me like Alec treated Wil poorly and like Wil is inferior.
WIIIIIIIIIILLLL MY BROTHER FROM ANOTHER MOTHER!!!! WHERE THE PLUCK HAVE YOU BEEN GOOD SIR!?!?...love you ^^
Playing catch with the dog is the best.
Thrilled to see you back in the saddle !!!!
Dang, 10 seconds. Earliest I've ever been to anything. Glad to see you uploading again, Will!
Will's doggo is almost as cute as he is :3
Happy to see you and follow along on your adventures.
Glad to see you again!!
Hey Will it’s good to see you again buddy,
We have missed you,
Alec Steele is so not the same without you dude,
So it’s good to see you putting out some content mate, Thank you.
🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧
With him going back to the UK and selling his forge, I am guessing Alec is not coming back. Will and Alec were a great team, complementary skills and personalities.
@@pauldevey8628 The forge will got from alex was unused and had been sitting dormant for well over a year. That was not the shops only forge. It was basically clutter.
Wow your shop really is in the middle of nowhere, huh?
Nice work. Glad to see you back!
Great to see you making vids for us all.
I’m not worried about how long you took between updates. There’s a bunch of people commenting “the biggest thing you did wrong” who don’t run a shop or a CZcams channel.
Nobody is guna forget you after you spent two years keeping the redhead Brit tied down to reality, you got flexibility, I think
"What do you do when it snows?"
Me: "I stay home."
Will: "I buy heavy machinery."
That's pure practical physics: Heavy things will weigh less due to shrinking in the cold, but also move easier when it's slippery....
@@samuelbhend2521 That slippery line was excellent. :-D
Great to see you Will, looking forward to seeing your new projects!
Good to see you back Will!
Never clicked so fast on a notification!
i am a vet on a disability income who enjoys your videos. just dont forget regular subscribers are who got your sub count where it is, thats what a lot of makers forget. thanks Will
Thank-you for your service.
Very excited to see your videos. Glad your back man.
its nice to have you back will!!
throughout the entire cage building all i had going through my head was the house building theme from Red Dead
First
Great to see you put out a video! Been waiting for this!
My favourite blacksmith !!
I am so excited for you Will. God bless you.
Great to see you back in the shop!
It was awesome to meet you in TX. Keep us posted on your future knife show visits...I would love to see your work in person.
There you are great to see you back on the tube!!
Glad to see another video getting posted, and looking forward to many more!
Excited to see your shop grow!
Great to see you posting again
So happy to see a new post, keep it up
Glad to see you Will! Keep’em coming man! 😃
super glad to see it all coming together for you will
Awesome Will! So pumped to see the rest.
Great to have you back. Sonya
Good to finally hear from you keep the videos coming
Can't wait to see you making things again.
Hi Will! So great to see you!
Glad to see you are still kicking! Cant wait to see the next vid!
Just happy to see you getting up and going!!!
Finally getting some content from Will! Excellent.
Yes! I’ve been waiting for this video!!!
Good update Will. Nice to see it all coming together.
Amazing production quality! Keep up the great work