11 Mad Engines You May Not Know About | Ep. 3
Vložit
- čas přidán 16. 01. 2016
- Subscribe for plenty of car content coming: bit.ly/SubToVisioRacer
SOCIAL:
/ visioracer
bit.ly/VisioRacerGoogle
/ visioracer
/ visioracer
/ visioracer
carthrottle.com/user/VisioRacer/
Subscribe to my friend's channel, IceOne01, dedicated to bikes and cars as well: / @iceone01
RELATED VIDEOS:
• 11 Mad Engines You May... Mad Engines #1
• 11 Mad Engines You May... Mad Engines #2
DISCLAIMER:
Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing."
The materials are used for illustrative and exemplification reasons, also quoting in order to recombine elements to make a new work. The original works were altered quantitatively or qualitatively and the video does not compete with the market for the original works. There were used small portions of the materials in a new context and expression for illustrative reasons only.
I do NOT own the video materials and all credits belong to respectful owners. In case of copyright issues, please contact me immediately for further credits or clip delete.
CONTACT:
visio.channel@gmail.com
CREDITS:
“Auto Union V16 Start-up Goodwood Revival 2012” by Vortech398
• Auto Union V16 Start-u...
“Auto Union Type C V16 Engine sound” by Tom McInnerney
• Auto Union Type C V16 ...
“Auto Union Race Cars” by miztazed
• Auto Union Race Cars
“V12 Engine Run” by Ron Devoll
• GMC 702 V12 Engine Run
“1960-1965 gmc 702 v12 running !” by santanamarquez
• 1960-1965 gmc 702 v12 ...
“Audi A8 W12 6.0 Sound Acceleration” by PEKA192
• Audi A8 W12 6.0 Sound ...
“Audi A8 W12-With Uprated Exhaust” by tom thorley
• Audi A8 W12-With Uprat...
“Audi A8 W12 6.0 Acceleration” by vindicator2008
• Audi A8 W12 6.0 Accele...
“Lanz Bulldog - Traktor 1 Zylinder Hubraum 10 Liter -” by XSlomo10X
• Lanz Bulldog - Traktor...
“LANZ Bulldog, Rohöl 1 Zylinder mit 10.338 ccm” by barbaholer
• LANZ Bulldog, Rohöl 1 ...
“Devel Sixteen V16 5000HP Engine Dyno” by Devel Sixteen
• Devel Sixteen V16 5000...
“Kawasaki 48 Cylinder Runs!” by kawapowa
• Kawasaki 48 Cylinder R...
“Sound! Audi Q7 V12 TDI Sportauspuff Sound by mariani Car-Styling” by mariani Car Styling
• Sound! Audi Q7 V12 TDI...
“Q7 V12 ťah” by Malá Guľka
• Video
“6B 6 Rotor Flames” by NO BAIL Productions
• 6B 6 Rotor Flames
“6B First Dyno Power Runs” by NO BAIL Productions
• 6B First Dyno Power Runs
“Insane engine swap: V12 1GZ-FE in a Lexus IS200 By Groundspeed Hulskes Trading” by bvonl90
• Insane engine swap: V1...
“190E Toyota V12 Turbo startup and rev” by bahaimus
• Video
“Mercedes 190E 1GZFE V12 Dyno Rear” by bahaimus
• Video
“Experimentalfahrzeug BRUTUS” by technikmuseum2010
• Experimentalfahrzeug B...
“Solitude Revival 2011 - Brutus!!!!! 47L V12!!” by DarkPuddi
• Solitude Revival 2011 ...
“World's largest Diesel Engine starting” by kbhmuc
• World's largest Diesel... - Auta a dopravní prostředky
I ran in the 1960 to 1970's some GM 702 v12's on Natural gas for 10 years. There were perhaps several thousand running to pump irrigation water in the western great plains. GM also made a 637 v8 along with the 478 V6.
The V12 produce 130 hp at 2200 rpm and ran very smooth.
I know where one of the Jimmie V-12 are, it's installed in a 65 GMC pickup with extended front hood. It's sitting in a shed in south west Kansas. The engines were used in that area to run well pumps for irrigation.
Naturally the Audi, a VW product, has the check engine line on.
2:44 "only makes aroung 55hp.. " . 55hp is more than enough for that tractor.
Yeah thats true!
For the Lanz Bulldog, 55 hp doesn't seem like much, but considering the extremely low operating RPM, it'll put out enough torque to make Godzilla's head spin. Just a guess, but I'm thinking over 400 foot pounds.
+DrFruikenstein The operating rpm of the 55hp Bulldog was 750rpm, now do the maths.
+DrFruikenstein You have to take into account that in the 1920's a 55hp tractor was one big goddamn tractor.
+Medokai oddly, I was wondering how big that number was going to be!
+Icarusaresane Considering that in the 20's steam traction engines were still in use in farm & industry, the Lanz Bulldog must have had tough competition.
Steam power has increadible torque, multi ton steam trucks accelerate like a sports car.
Another fact about the Lanz engine is that it can rotate in both directions. If you don't get it right at the startup you have to stop it and try again. Or drive backwards :-D
I'd love to see that GMC V12 on a dyno with the usual aftermarket parts, say dual squarebore Holleys, inlet manifold with some decent plenum volume, electronic ignition, headers, cleanup of the ports and combustion chambers, bolt up the bottom end real good. Yeah.
That BMW 47L V12 startup sound is so RAW.
I know where one of the gmc twin 6 is at. It sits in a shed in western Ks. it is mounted in a gmc truck with an extended hood. I was told that those engines were used in that area to pump water from wells for crops.
there is a good reason they keeped the large diesel powerplant engine in Copenhagen in running conditons even if today only used as tourist attraction... there was some years ago a huge electric black out in scandinavia ... this diesel powerplant played a major keyrule to get the grid back into running conditions... because it needs no electric power to start it is able restart a dead electric grid
Why would anyone "dislike" this video? There's little to no opinion and he properly sourced his information/CZcams users.
Hey people. If you know an engine or engines that are not so known between other people, share your knowledge with me. It looks you really like this video series and I am thinking of 4th part. It can be production or very interesting custom made engine, not necessarily car motor. Thank you!
+VisioRacer
Gotta get the Chrysler Turbine car in there.
Good series btw.
acronus Yeah, I did not expected to be that popular. Thanks!
+VisioRacer EMD 16-710 2 stroke turbo diesel, 3500hp, 710 cubes per cylinder, or the General Electric 7-FDL12 4 stroke turbo diesel, same sort of power levels, 2 completely different sounds
Leyland L60
+VisioRacer Jay Leno did an episode on JLG here on CZcams on it.
That 6.0 L V16 sounds incredibly good
like always nice video! and thank you for putting BRUTUS into the video :)
The Audi I was like holy shit, then I realized it was KPH lol
I'm loving the new look. Great video too.
in the 60s I worked for a CO. that had a hole fleet of GMC 7000 with V12
A fleet of holes?
There is a shop in Blaine, Minnesota that has a lot of experience and parts for those Twin Six GMC engines.
Hey Visio, I got one for you. The 01-06 GMC 3/4 and 1 ton trucks had an Option that wasn't purchased too often. It was a 496ci (8.1L) Big Block V8. It wasnt liked too much because the Duramax Diesel was the same price and had much better torque and gas mileage. But many drag racers have picked them up and turned them in 1/4 and 1/2 mile monsters. Take a look into it, it'd be cool to see it on one of these videos.
+Big Mike Thank you :)
+Big Mike I have that in my truck :D I clicked on this video hoping to see the vortec 8100 in here but that's ok. I drove it today actually. It's quite the conversation starter.
It was offered in a few Chevy vehicles. The suburban 2500, a few 2500HD trucks, and my chevy avalanche 2500.
+Big Mike Freaking beast of an engine, my boss has one and it is crazy what you can turn on into.
My moms 3 tonne had a swap in it. It's a GMC with a Cleveland 4 barrel carburetor engine. It was bought out from my mom for the intentions of, "Putting it in my little, yellow Datsun truck and the transmission in it as well for drag racing. The body will be used as a flower hut."
My moms 3 tonne had a swap in it. It's a GMC with a Cleveland 4 barrel carburetor engine. It was bought out from my mom for the intentions of, "Putting it in my little, yellow Datsun truck and the transmission in it as well for drag racing. The body will be used as a flower hut."
7:30 yeah now that's when I would use the term "gallons per stroke"
The Auto Union V16 with twin superchargers could, when tuned right up, produce 1000hp. Being as that was a racing car built before the second world war I can only imagine that it must have made for a car that was "interesting" to drive. By "interesting" I mean that the white cotton overalls often used by racing drivers at the time were probably not practical for drivers of them. To quote Jeremy Clarkson "some poo just came out..."
+gosportjamie imagine that. 1000hp. On wheels skinnier than my corolla. god almighty.
Protection includes: a leather cap, goggles, and a really big moustache.
harrimat100 None of which will do you the slightest bit of good when it all goes wrong...
I never knew of the huge GMC V12. Sounds _good_. Like a WWII fighter. All the love for big V12s. Guessing it was some kind of truck engine in the pre-diesel era.
But will it fit in my Honda?
Flubber just go mad max on it
First off, Great video! My only issue is the Bulldog tractor engine. It's a hot bulb engine, not quite a diesel. Close but technically not quite.
Keep up the good work visio
Cool list of videos, will wait for part 4 :D
+jody024 You don't have to wait too long. If you are subscribed, new video will pop up tomorrow in your sub box :)
VisioRacer
cool
KEEP MAKING THIS SERIES OMG
*This* *whole* *Devel* *Sixteen* *thing* *is* *not* *going* *to* *happen*. I happen to know a production and engine-development engineer who works for the Quattro GmbH associated to Audi Sport. He told me that 5000 (and even 3000) metric horsepower was a ridiculous claim and that such an engine could never sustain the stress of everyday use. It would need a maintenance after every 100 to 200 km and a complete rebuild after 500km. Those Saudi amateurs should leave making cars to the people with experience and know-how.
Look at who is from. ..the guy who built the engine, I'm not sure why they are but I'm sure there's a reason. Look up Nelson racing engines decal sixteen review. They have a prototype already but it will be an expensive limited model built per order I bet
and look now, it does exist
love how big the tac is on the audi v-16. i want one of those gmc v-12s, damn what a monster. that last engine is a hell of an apu.
Imagine what 22500HP sounds like!Also, that rotary engine is badass!
Curtiss V-4 V12 only 2 still exist one is in the Smithsonian museum and the only running one is in the replica of Miss Detroit III which was previously running the GMC V12 that was modified to look like the Curtis V-4. The Curtiss V-4 was what was in the original Miss Detroit III.
Moving up quick to 15k subs, congrats bro!
+EdwardAlcala It is ridiculously fast. Just before Christmas I had 3K subs, thank you all so much!
+VisioRacer You do deserve your subs! Great videos, keep them coming!
+VisioRacer it shows that your videos are awesome man keep it up, just remember the few that were here first ;) haha much love man!
+EdwardAlcala 15000!
+VisioRacer hype hype hype!!! Congrats bro!! :) you deserve it man! Just wait until you hit 150,00! Haha
GMC also had a 637 cid v8 based on this design. Witch shared alot of parts with the diesel engines! The 305v6 to the 702v12.
The Lanz Bulldog is a hilarious machine. With the hand throttle set as if it is driving equipment off the belt drive the front of the tractor will actually jump off the ground in time with the revolutions of the engine. Probably not the most comfortable tractor to drive though...
I've actually seen the Kawasaki it's in a motorcycle garage in Hatfield England... One hell of a beast
To Visioracer, could you find out more about a type of tractor called the field marshal, that had a 1 cylinder engine of quite large proportions, I think they were only available in the 1940s in England. The Lanz bulldog seems somewhat similer.
Got it
That last one at 7:40, I am positive it's a little older than that.
I used to be an adventurer, and I'm pretty sure I saw that thing in a Dwemer Ruin. Avanchnzel, I think it was...
...This was all before I took an arrow to the knee of course.
Visio, I don't know if you ever heard of it but Ford once made a V12 specially for the Ford GT90 concept, it was a 6.0 litre quad turbo V12! It actually never ran with the turbo as they never tested it, the engine produced so much heat the they HAD to put a ceramic tiles similar to those used in space shuttles in the exhaust otherwise it would melt the body work... The engine later was put in a Aston Martin but it was naturally aspirated and didn't make roughly as much horse power...
+icaro arrigoni (Ithec) Yes, I do know that engine. They also did another 6.0 V12 for Ford Indigo Concept which was different from that in GT90.
Where can I find a GMC v12?
man the sound of that audi w12 is sick!!!. That a8l I know for a fact is close to a $100,000 car brand new cause its at or near top of the line for that class of vehicle for the audi brand i do believe if im not mistaken.
What's the sound track from can't think of the game
That GMC V12 sounded like it had a demon trying to get out.
0:57 dat sound tho :3
Check out the triple turbo 376 cubic inch 2 cylinder in the John Deere 730 diesel. This guy built it and it's wicked. Or look at the 501 ci 2 cylinder in the model D
International Harvester gas start diesel engines. They were in the td series crawlers built before 1960. If you look on the right side of the engine, they look like a gas engine but the left looks like a diesel
2 stroke sound awesome.... screaming jimmy!
The Auto Union and the Lanz are very popular in Germany. Maybe you should mention the Red Porsche Killer.
omfg the v12 in that Q7 is yanking tf out that truck
Am I the only one that like that massive powerplant engine, and the big thumper tractors, more than the rest of the lot here?
hahaha that w12 audi and check engine light is on ofcourse :D
the BRM racecar is crazy, 1.5 v16 high rpm's in the 50's. should put that in a video dude 😉
That GMC v12 sounds like a pissed off v-twin when idling.
holy crap a 47l v12 if something like that were build now how much power would it have?
So cool. Thanks much for putting these videos together. Really made my morning. And again, what's with the down votes? Little old ladies, lost on the interwebs? "I thought this was about sewing machines".
7:50 awesome darktechno beat
My Austin 7 sound like the car at 29 seconds (In my head) But its more like the sound at 2 min 54 seconds
Nice video
The Auto Union Type C dominated European racing at the time of its introduction, winning just about every Gran Prix in which it was raced.
First one Audi union,its factory engine or tuned?
dropped a tweet to you just found your twitter, keep up the awesome content bro!
would it fit on my honda ?
The straight 8 at the beginning was the best sounding engine.
That A8 W12 is a beast....
I have a 355 Buick Wildcat engine from 1964.Its the only year made. It's only 300cid ,cast block, aluminum heads. From what I have found out it was to try and get into racing but it made too much power at 355hp or 355tq
Our family has a Lanz Bulldog tractor ( one cylinder) fully restored to factory and it is a beut
that auto union sounds so damn good
6:43 That engine is in the HE111 bomber.
That became bombers used in the London bombings.
In the World War 2
The VW R50's Turbo Diesel V10 engine is quite a rare piece as well. Speaking of VW's, the Golf MK4 had a V5 engine. Not L5 like the MK5; an actual V5 (VR5 if you want to be more technical). Ford's Triton V10 is quite unique as well. Might be a piece of trash, but boy does it sound amazing.
The Subaru Legacy was offered with a Boxer 6 engine; worth mentioning that because besides the Subie, only hyper-expensive Porsche 911's and Ruf's have that kind of engine. The Cizeta-Moroder V16T transverse mounted V16 engine is also worth mentioning. And lets not forget Saab's and Lancia's V4 engines.
the lanz bulldog engine is called a hot bulb engine and isn't necessarily a diesel.
@VisioRacer
Check out Hondas old motorbikes.
RC149 5cyl 125cc
RC166 6cyl 249cc
and the RC116 2cyl 50cc, highest Hp per litre on an NA engine.
+Linus Johanson Will do that, thank you
3:14 'dat turbo sound... orgasmic
isnt the tdi 10 also in the toureg
Napier Deltic is an interesting engine too. Check it out.
holy shit that A6L surprised me
You kind of have to wonder what happens if that last engine decides to throw a rod through the side of the block...
You run like hell!
GreenJeep1998 In search of some clean underwear I suspect...
Go to the hospital if you are still alive.
next stop would be hospital and hearing aid store lol
gosportjamie
they fix it.But those run at 130-185 RPM. Can't see that beauty throwing a rod.There is one in Boston to power all the hospitals in black-out emergencies.
Hows about the v8 730hp scania stock engine
I love the GMC big 6's so cool! They made a 478 V6 too! Imagine the Pistons...
+Ian Thompson
GMC did some cool stuff.
+Ian Thompson About 25 years ago I went to the store in New Haven,CT and there was this straight job sitting outside the store just idling and it sounded great. Well I noticed on the front fender it said V6. I popped the hood and low and behold there sat a freaking big block V6 with a big 4 barrel carb. It was the only one that I ever saw. The valve covers were ginormous!!! Days of old....
+Ian Thompson I just rebuilt one that goes in hyster hi-lo that puts out 725 ft lbs of torque at 1600 rpm no stock V8 can touch that.
+Stephen Scheidemantle Holy Crap!! What displacement was it?
+Ian Thompson A 1966 478 bored over .060 and the heads deck milled and ports opened on exhaust & intake
The Devel-16's heads look allot like a small-block Chevy's at their ends... Makes you think for a moment.
The Brutus is simply terrifying!
+MrZappy101 yes it like a monster. they actually drive it around at a special day in the sinsheim museum. there is just grating dividing the feet from the engine, so you get oil everywhere and its hot. also only one person dared to drave 200 kmh with it :D
The engine in the Camaro ZL1, and I'm talking the original. Can't remember the name, but it was a 427ci with aluminum headers and block. It was used in super-stock drag racing. Only 69 Camaros in total had that 427 in them, and it's faithfully performed in the Corvette of that generation and the previous, spanning both classic Stingrays.
Aluminum headers, huh?
Yeppers, the block itself too. It was a huge deal back in the late 60's and some of the 70's. It wasn't taken lightly in the Stock Eliminators, despite it's actual weight being pretty light for a big block.
Are you sure that the world's biggest diesel engine is in Copehagen?? Chuck Norris' lawn mower has a bigger one and only he can pull start it with the started cord. It is made of high tensile steel cable overwise Chuck's awesomeness would break it.
The engine in the Lanz Bulldog is not a diesel engine. Compression ratio is just about 6 to 1. You can operate this engine with a wide range of flameable fuel because it has a cylinderhead that is glowing all the time. The fuel is directly injected in this glowing part of the head at round about 140 degrees before the piston is in top position. So the fuel , no matter what kind of, has enough time to get into a flameable gas. The piston does push fresh air into the glowing cylinderhead while it is going forward. Then the mixture of fuel and air starts to burn very softly. This engine burns diesel, petrol, kerosin, alcohol, pure oil and lots of more....
but it will burn politicians?
ΑΡΗΣ ΚΟΡΝΑΡΑΚΗΣ if you blender them to a liquid the lanz will run on it :p
mightress noice
Granddaddy of them all, a 1785 Boulton & Watt steam engine
Is it me or did the rotory engine sound like the beginning of a skid row song?
Brutus from top gear , bad ass car.
These sound so weird now without your voiceover describing the motors.
well Im dreamin' someday toyota makes a production new supra with a v12 engine made out from 2 2jz engines.. probably thats gonna be awesome
Would have liked hp and ft lbs rating on the GMC twin six
GM can't even make a V12 run smoothly.. that's skill.
in old GMC they put all kinds of odd size V 6 engines.
i have seen an mad engine swap on CZcams. it was a bmw 2002 with m50 engine. probably open headers while he was recording (also the radiator wasn't connected) but brutal sound. You should check it out
+Tankred Zrn Hm, very nice. I have already found swapped 2002, but the engine was SR20DET
+VisioRacer I know I follow you since a while :D I love your videos
Tankred Zrn How do you know? I haven't used that swap yet :D
+VisioRacer oh might be possible. I am dreaming of an bmw 2002 with an modern engine, I was searching CZcams a lot. that's where i found the video, I have probably seen the Sr20det swap there
Where's the GMC Featured in the thumbnail?
No Honda owners, that last engine won't fit in your car. lol
try fitting that last one in your honda!
well Im dreamin' someday toyota makes a production new supra with a v12 engine made out from 2 2jz engines.. probably ghats gonna be awesome
should include the Ford gaa and gac engines in your next video. the gaa was an all aluminum, dohc, 1200 cubic inch v8 tank engine. I know of at least one sitting in a mustang. the gac may be harder to find footage of. it was a massive 1600 cubic inch v12 based off the Merlin
along with the shoc
or the 35 cylinder mopar flathead star?
how about the 427 cammer? after all, it's the reason why ohc engines aren't allowed in NASCAR.
+Joshua Black shoc is the cammer, witch should be on there
+David 123 sorry, I read it wrong. my bad. nothing like mopar throwing a fit because something was out performing their precious hemi.
I am currently rebuilding a 306 V6 to put in my s-10...
Lanz bulldog was the most interesting, 10.3 ltr 1 cylinder.
The Auto Union GP car was probably too powerful for the tires of the thirties.
7:30 will it fit in my honda?
GMC 702 V12 is one of the best, I'm American Muscle guy.
Which engine is at 6:20?
At 6:00 the V12 Toyota Century is introduced. Then it goes to a twin turbo V12 with the red intake at 6:20; then to an older black Mercedes E-class on a dyno?
+theomnipresent1 If there is no other introduction, it means it is the same engine. However this one in that Mercedes is little bit tweaked and is turbocharged. Stock 1GZ is N/A
The 'red' one at 6:20 is a twin-turbo, and has a non-stock intake. So it's also a 'little bit tweaked'; or a different engine.
theomnipresent1 It is 1GZ swap if not obvious
The twin turbo with different intake made me think it might be the wrong footage, which was escalated by the next clip of an old E-Class on a dyno with no engine bay shot (since this is about the engine).
I know what it was supposed to be, but wanted someone who really knew for 'sure' to confirm having seen these clips/cars elsewhere; maybe with links?
theomnipresent1 If you check the video description, I always put original video links in there.