OMG !! We Cut So Much Out, Miata / MX5 NC Rear box section repair.
Vložit
- čas přidán 20. 09. 2022
- In this video we repair the rear underbody box section on the Miata / MX5 NC.
If you enjoyed the video, smash that Like and subscribe button & comment your thoughts down below. It really helps us out!
Check us out on Instagram - invitescon...
Check us out on Facebook - / yorkshirecarrestoration
Check us out on TikTok - / yorkshirecarrestoration
Check out the first part in this series where we show you around the car and our initial thoughts:
• Abandoned Datsun 260z ...
Check out our 1980 Suzuki LJ80 restoration playlist!:
• Introducing our Barn F...
Check out our other how to and rusteration videos:
Mk2 MX5 Rusteration:
• Can we Fix the Rusties...
MX5 How-To videos:
• How to Remove a Mazda ...
Check out the little classic mini restoration!:
• Classic Mini
Check out our MX5 V6 Conversion!:
• MX5 V6 Build
We also have much more content on our playlists as well as big plans for the future
_MUSIC_
-
Music: Dreamscape by Nomyn is licensed under a Creative Commons License.
creativecommons.org/licenses/...
Support by RFM - NCM: bit.ly/3crYXYQ
-
-
Music: Love Rain by Thomas Gresen is licensed under a Creative Commons License.
creativecommons.org/licenses/...
Support by RFM - NCM: bit.ly/3dMeinn
-
-
Music: Fine Seeds by Thomas Gresen is licensed under a Creative Commons License.
creativecommons.org/licenses/...
Support by RFM - NCM: bit.ly/2xGHypM
-
-
Music: what if i forget? by kaleido is licensed under a Creative Commons License.
creativecommons.org/licenses/...
/ . .
Support by RFM - NCM: bit.ly/2xGHypM
-
-
Music: LiQWyD - Glow
LiQWYD:
/ liqwyd
/ liqwyd
/ liqwyd
creativecommons.org/licenses/...
Music provided by RFM: • Video
-
-
Music: Stoto - Still Can't Sleep
Stoto:
/ stoto
/ stotomusic
/ stotomusic
/ stotomusic
creativecommons.org/licenses/...
Music provided by RFM: • Video - Auta a dopravní prostředky
Watching this is better than going to the movies and it saves a good car from the scrapyard
Thank you :)
Quality work making the repair panel from scratch perfection.
Thank you Paul :)
I love watching these car restoration videos and have done a little myself on my own vehicles but the skill of developing that panel from a few lines drawn on the steel was amazing..can't wait for more of these ...thanks for sharing...👍👍👍
Thabk you Richard it's much appreciated :) 👍
This has got to be among your satisfying repair & replacement gigs!
Its great to watch a proper panelbeater in action. Great vid.
Thank you Steve :)
Masterclass in sheet metal fabrication, awesome work 🇦🇺
Thank you Mel :)
Your unbelievable, a true talent
Thank you Andy :)
Great job!!
But this is the result of rubberized undercoating! Use Fluid Film 😉
Yes that's also good we have used that before :)
The workmanship is fantastic. We just don't realise the work needed to make a good repair panel. It's not a bodge up job. Great work and my car will be on its way early next year for some work.
Thank you, it's the support of our viewers that makes it all worth wile :)
Always a pleasure to watch you work! 😎
Thank you Tony :)
@@yorkshirecarrestoration You Sir are very welcome! Your work inspires me as a Classic car restorer . Here in the U.S.A
Thankyou for sharing your expertese with us! I love that you both have a great sense of humour and enjoy the task at hand! Keep up the awesome job 👏
Thank you we do tend to have fun doing the vids.
You guys are truly artisans. l could watch you do this sheet metal work all day long....... just have to make a beer run first. 🙂
Thank you Jonnie we could and do do it all day , just need the beer now haha
Damn, I did not expect to see you make that at the anvil. Well done!
Thank you. It is satisfying making them as well :) 👍
Love what you are doing YORK 👍🏿..Skill-full craftsmanship!!
And I love how you jump into action without 2 much talking 👍🏿👍🏿👍🏿⬆️
Thank you Rodrick :)
I really enjoy your work, owning an rx8 that was based on the mx5 floorpan these are of particular interest, watched your recent video on tools and techniques, it would be cool if you did a similar video with products, why and what to use.
Hi Paul we are planning that video as we speak :)
I watched every minute..i do this all day too..nobody understands the work involved in making things look right
Thank you Joe. Yes its making it look stock that’s satisfying :)
That panel which you made Steve amazing,keep up the great work,glad my NC isn’t that bad yet 😂👍
Thank you Lee it was a nice panel to make :)
Just uncanny skill! Wonderful to watch, thanks again.
Thank you bazer glad your enjoying the videos :)
Blimey so much rust you are metalworking genius well done top work ♥️👍
Thank you Dean it’s much appreciated:)
satisfying when a plate just fits
Thank you :)
You have a special talent and do a better job job than most panel beaters
Thank you Grant , your comments are appreciated :)
Awesome work! Still can’t believe it’s profitable to repair such extensive rot and rust!
We are not doing these restorations for profit :) we do it for the love of classic cars and to help others in home repairs as we try to use basic tools.
@@yorkshirecarrestoration huh, you stoop to reparing EVs to pay the bills 🥴😨
What a beautiful repair panel - a true wok of art, and thanks to last weeks video I spent an entertaining time under my NC only to end up covered in very fresh sticky and clean Underseal - Panic over for a while!
Keep it topped up with wax oil Colin 👍
Steve you are such a "Tin Wizard", that panel you made would take most viewers on the channel days to make and would require them to make around 10 attempts at it. Such skills are rare today!
Thank you Eddie it’s just a bit of practice :)
@@yorkshirecarrestoration Just a lifetime of practice it looks to me!
Lots of practice indeed :) thank you!
I enjoy looking this kind of art... thank you.
Thank you :)
I admire that.
Good work 👏 🙌 👍
fantastic repair,I thoroughly enjoyed the video.Thank you guys
No problems James , glad you enjoyed it :)
ThkU Steve . Again I'm very impressed by your expertise as well by video making .😉👌
Thank you Emmanuel 👍
Amazing
thank you Logan :)
Thankyou for this instruction video! You are really a pro! Awesome!
Thank you Stefan :)
Master at work top skills revealed.
Thank you!
Now that was impressive, thank you.
Thank you Gerry :)
Great work. Looks better than original…
Thank you penny. :)
Best I've seen propper craftsman
Thank you Andrew :)
Gotta say, I love living in Australia, never have to worry about your pride and joy rotting like this. I can see how panel shops would do a roaring trade though.
I've just bought an e46 with rust issues. Your videos are very inspiring just to have a go. I'm a beginner with welding and fabrication. Best way is to just have a go right?
Thank you for the videos.
Gavin
Yes just plan it first and have a go. Don’t loose patience with it and if it gets a little too daunting leave it alone for a while and read, watch vids and plan how your going to tackle it next time. Enjoy the process including the bits that aren’t a tall physical work :)
There are a lot of rusty cars here :)
Now that’s impressive! I assumed the panel was going to be made in at least 3 separate parts!
Masterly done 🎉
thank you William :)
What a great repair fabulous
Thank you Paul 👍
Yes he can ...much better ! thanks for looking Spezi in Yorkshire 9 /2022 MX5 NC from 7/2014 ! NEW car + Spezial Service.......greeting,s all Miata driver......
Welcome and glad your enjoying the videos :)
Good workmanship for a long time I did not watch the manual Work
Thank you :)
Perfect.
Artist
This is ridiculous how well you made that box section from scratch with the nut back in place and everything. You should fabricate this section on mass production because mine has gone on both sides. Wish i could have you guys take a look at it.
Lovely job mate, done properly its not going anywhere now.
Thank you :) your support is appreciated :)
Skills to pay the bills 😊
😁👍
Good skills
Thank you :)
I love Mazda but gees these mx5s are so prone to rust. Even my friends 17 plate he looks after meticulously has pretty bad rust. Lessons never learnt.
Some of them do tend to rust
Ģood fabrication
Thank you 👍
Genial, que buen trabajo quedó perfecto salu2
Thank you Carlos :)
Carros tan nuevos y ya podridos por el salitre deverian de aplicarles ah todos lo que es la carroceria un ailante contra la corrosion muy buen Trabajo un saludo
Looks like you should've kept cutting! Great work!
Thabk you James :)
ЛайК!)
Thank you :)
the rustkiller ;))
I do love removing rust :)
terbaik bang.salam hormat
Thank you :) 👍
👌🏻
👍
Nice video, how thick metal plate do u use for japan cars? I know original should be around 1mm thick
+ what kind of spray do you use, is it base coat + zinc?
Tin worm goes munch, munch, munch.... damn those things rot!
It dose :)
Good old Mazda never learn about rustproofing, The NC rots like an NA and NB!
Yep they rust :)
Great job my friend. I wish you success. What is a good metal protection product? Body 989 - Mipa Epoxy Primer
Yes that's a good product :)
What is the grey primer / epoxy that you are using on the interior & exterior of the replacement panel you formed ? Some of these products may not be available or renamed here in Aussie. Thanks for producing these videos, as for me, they are very interesting and help those of us whom are home restorers, without million dollar workshops
It’s 2 pack brush on primer. This one is an etch primer with zink in it :)
@@yorkshirecarrestoration thank you
Our pleasure
What paint did you use?
Top..... Brasil
Thank you and welcome :)
Hi thanks for uploading this content it's awesome work..I do alot of fabrication on cars the sheet metal that I use on body work in some areas is thin so I can get a corner shape easily with the use of very little tools, however when it comes to floor sections like chassis sections I try to use 2mm or less a friend of mine uses 3mm which I think is overkill and a waste of money as its only as strong as to what its attached to I think 2mm is plenty what do you think? a crumple zone is necessary to take impact through the car not the driver or other occupants I'm not really one for government red tape but I do think that in these cases a little safety is good practice I only now do work on my own cars I try steer clear of any work as I've got some ill say some minor health issues any help would be appreciated thanks.
Hi Stuart. Glad your enjoying the videos :) 👍 as for the chassis and strengthening sections 2mm is plenty , usually the original chassis etc are 1.6mm and that’s what we use :)
@@yorkshirecarrestoration ok thanks I've 3 classic cars one is on the road the other 2 are being welded..thanks for your reply much appreciated
❤❤❤🇺🇸
It blows my mind that you can fabricate a piece like that from a flat sheet of metal and hand tools.
Thank you Dan :)
Just wondering, why did you work to replicate the stamped section on the flat section of the panel? It looked super time consuming to match it so well.
Hi, Why not ? didn't take long and shows people how to do it if they wanted to keep an original look and to transfer that skill to any other panel :)
@@yorkshirecarrestoration Awesome, I thought that might be the case! Just wanted to make sure I wasn't missing some other reason, keep up the good work :)
How long did it really take to fabricate that piece EXCELLENT JOB
That panel took about 2 hrs to make in total :)
Only 2 hrs ,that's impressive work
Thank you!
зачем такие сложности? можно просто приварить лист потолще и всё))
What an expert but the cost of these repairs must exceed the value of the car.
Hi geddon, the cost was time, wedding wire and £5 worth of sheet steel. We don't make these vids so you can goto a shop and pay for what you have seen done, we make then so you can maybe see how it's done and have a go yourself :)
Was this car left abandoned on the tides next to an abandoned fish and chip truck? I have seen flex boxes wear out but this makes me think the car was exposed to seawater.
It’s kind of common for them to rot out as the drain holes tend to drip on them :)
how long it take you to make repair peace and how long it take from start to finish?
It took me 6 hrs to do all the work I. That video but it was slowed down by me having to move and adjust the camera and lighting all the time :)
@@yorkshirecarrestoration honestly i was thinking it was a bit longer.Inpresive work.👍
Thank you very much! We love what we do :)
great content but that music?🤪
Thank you.
Looks like a late mazda mx5 how old??
It's a 2006 NC model :)
Are all Nc's this rusty ?
Where is your workshop …Can’t find your address.?
We are in crowel jus outside scunthorpe, you can contact us via email on steve@yorkshire-car-restoration.co.uk
The program is great but loose the music thanks
Sorry we can please everyone with the music :)
That much rust on a modern bodyshell?????
Yer they do rust if not looked after
This car was eaten by moths)
👍
Maybe better to strip the car down and put on a rotisserie and put in a new floor
No this car wouldn’t be worth saving taking it to that level :)
i think that i need to stop watching your videos because all that dust rust makes me cough😉
Haha that’s not a bad idea Leo :)
👍👍👍👍👍👍👍🤝🤝🤝🤝🤝🇧🇾🇧🇾🇧🇾
What paint did you brush on that new piece?
2k primer :)
@@yorkshirecarrestoration What about red oxide instead or that gray anticorrosive primer? I’m fixing my XR2i floors and that’s how i discovered this channel. Good work buddy
@@user-ko9jd7dm9o yes both are good :)
@@yorkshirecarrestoration Thank you very much 😊