How to Sharpen ANY Knife RAZOR Sharp with Work Sharp Field Sharpener
Vložit
- čas přidán 31. 05. 2024
- How to sharpen ANY dull knife scary sharp in minutes. Knife sharpening with the work sharp knife sharpener.
-Work Sharp Field Sharpener on Amazon: amzn.to/3jevAJD
-Larger Worksharp Guided Sharpener: amzn.to/3tZZzuQ
-Cold Steel Kitchen Knife Set on Amazon: amzn.to/3tYJ9To
Mat Culberton's channel: @mathewrculbertson
► Get my FREE Woodcarving eBook ➡ howtowoodcarve.com
► Woodcarving Project Idea Guide eCourse: corneliuscreations.gumroad.co...
🔧 View my tool list on KIT: kit.co/mattcornelius
⚒️ Website www.howtowoodcarve.com
🔔 SUBSCRIBE HERE: ► CZcams: bit.ly/2mEWLQk
AWESOME Woodcarving Shirts ➡ bit.ly/2DsekLD
⚒️ TOOLS & SUPPLIES I USE FROM AMAZON ⚒️
⚡︎ Drawing Pens on Amazon: amzn.to/3GxS9mh
⚡︎ Foredom SR on Amazon: amzn.to/30kdT5z
⚡︎ Dremel 3000 on Amazon: amzn.to/3qIkO2S
⚡︎ Budget Rotary Tool: amzn.to/2HPa1i5
⚡︎ Rotary Burrs I like: amzn.to/2Va2Q79
⚡︎ Budget Woodburner: amzn.to/2FMLZ3t
⚡︎ Woodcarving Apron: amzn.to/2UoUX0k
⚡︎ Sandpaper: amzn.to/2WHKjPA
⚡︎ Dust Mask: amzn.to/3HjMam8
⚡︎ My Favorite Stain: amzn.to/2HRKvIQ
Soundstripe ID: JHLS2LCDM9SZO2F1
Follow:
►FACEBOOK: / cornelius. .
► INSTAGRAM: / cornelius_cr. .
► CZcams: bit.ly/2mEWLQk
🔔 Subscribe : CZcams: bit.ly/2mEWLQk
#woodburning #pyrography #diy
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites at no extra cost to you.”
🔔 Subscribe : CZcams: bit.ly/2mEWLQk
#knifesharpening #worksharp #knifesharpening
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites at no extra cost to you.”
-Work Sharp Field Sharpener on Amazon: amzn.to/3jevAJD
-Larger Worksharp Guided Sharpener: amzn.to/3tZZzuQ
-Cold Steel Kitchen Knife Set on Amazon: amzn.to/3tYJ9To
Something that i learned when using this is that i like to put erasers on my ceramic rods to get the metal off of it, i also like to put the plates through water to get the metal off as well from the plates. the goal here is to increase the lifespan of the plates by also maintaining it's ability to maximize the efficacy of sharpening. For those that havent cleaned their plates in a long while, use gentle dishsoap and a dollar toothbrush to brush along the plates to get all the metal shavings out of the diamond ridges. There is also an arrowhead holder behind the plates too, so you can lift the plates, put the arrowheads inside the slot, and then carefully sharpen. I need to get more compound to put on the strop but this is a nice video. thank you much!
That is a great tip! Thank you for sharing
Hi there, just a silly question, what temperature of the water?
@@ryankanters4385 warm is nice, not hot
I’ve been using rem oil wipes to clean my plates
I have a lot of different sharpening systems, most of them are from Worksharp, including Precision Adjust. But this one is one of the most versatile, it gives the easiest and fastest sharpening result for me.
Love it! 👍
I have had one of these for years. It is my favorite sharpener by far!
I use this as I am disabled and it is perfect for me and so easy to get to use.🥳🥳🥳🥳🥳
Very happy with most Work Sharp products.
Still wish they'd just offer this Field Sharpener with a 17° angle guide as well. One for the field with 20°, one for the kitchen with 17°. Would be all that most people need.
Theres a bigger version with different angles!
Name?@@The_Dude_420
@@The_Dude_420 can you link it?
I bought 2 of these based on reviews, one in the kitchen, one in the shop. Thanks for the very helpful "how to" video. And wow, I've never been very good at sharpening. I was able to get my orange buck 284 shaving sharp following your instructions. Now, with patience, I have lots of knives to sharpen. I'm hard on edges, so 20° is just fine.
I just bought one .I love it !!
Glad to see there's a bigger one, I'm a butcher and that sharpener looks nice and it's a great price. Thanks for the video and info
Glad you enjoyed it!
Work Sharp should have a link for this video on a QR code on the packaging. I’ve had mine for years and this video is better than anything they’ve put out themselves.
Wow, what a huge compliment. Thank you bro!
Thanks for this review. this is exactly what i've been looking for.
Glad it helped you my friend.
Thx young man, I hope that I can do that as well. You make it look so easy, wish me luck.
Just as you I have trie many sharpeners, but have finally settle on the tool you show here!
Good stuff. I have this one, but you still showed me something new... thanks for that.
Glad to help!
Dont forget the small ceramic portion for serrations. Also has 2 broadhead wrenches under the metal plates for tightening or removing broadhead arrowheads.
Great demo, thanks I got it at Blade Show so this really shows me how to use it
Glad I could help!
Ok dud, just got mine and YES it works. Love it. One knife it took some time but RAZOR sharp. Buckaroos get this one. THANKS
Glad you found the video useful!
This is a great video. Thanks for the demo and showing how to properly sharpen a knife with this sharpener I am planning to buy one
I am glad you found it helpful!
I suck at sharpening knives, but i bought this sharpener a couple months ago and have had really good results. It really is worth every penny
I have one and it works outstanding if you follow Matt’s instructions.
But for best results get a better leather strop for a better final edge. Great product.👍👍
Thank you for the kind words sir!
Was doing some research on sharpeners (top 10 lists) and the Work Sharp was on many of the lists. Came across this video and liked what I saw, especially the ease of use. Picked one up yesterday at Lowes $29 and just now sharpened two knives. Worked fantastic on both my Boker Drop Point Kalashnikov Auto and my CRKT Tanto LCK Linerlock!!! This video was clear and informative, thank you!!!
So glad you enjoyed it! Enjoy the new sharpener!
Just bought one and used it on a small Victorinox kitchen knife that could barely cut a tomato. Even at 20 degrees, its cutting paper better than a Spyderco PM2 I just bought. This product is very well designed.
I do photography and am very very impressed with your camera work. The multiple angles to help show it from many views. I’ve only seen something this well with a videographer I follow. Good work. I came across this video because I have there kitchen version and wanted something to keep in my hunting bag.
Hey Jake! I appreciate the kind words. I am actually a videographer myself 😄. I think this would be amazing to keep in your hunting bag. I need to buy another to keep in my vehicle!
i bought this recently and i can attest...works very well and produces a razor sharp edge. much better results than i was able to achieve with my lansky ceramic rod sharpener.
I have one….. works great!!!
thank you sir great video
Glad you enjoyed it!
Man i just used one of these. Going to buy one now especially since you reviewed it. 👍🏻👍🏻
It is an amazing little tool!
Tip. The diamond surfaces, being magnetic, can be flipped over, thus protecting from dirt, etc. when transporting on camping/hunting trips, etc. I also find it's easier to hold the knife firmly by the handle and run the worksharp along the blade, rather than try to hold the worksharp by the end and run the blade along the abrasive surface. There just isn't enough to hold onto on the worksharp to keep it steady, and there are no tables out in the field to set it on anyway.
Sharing now!
🤜🏻👍🏻 thank you brother!
Dude, someone finally shows how it needs to be done in easy steps. So simple but if you've never done it, it's somewhat of a mystery ;) ... thanks.
Glad I could help!
( I don't sharpen a knife, I just put a point on it, and it cuts real good ! And easy to do, but someone has show you !)
Good video matt
Thank you, Austin!
@@CorneliusCreations your welcome !sorry for taking so long to get back to you I been frustrated with some of my new viewers so I took a brake from my comments and am now trying to plan a response video.
@@Hissatsu5 You are good my brother, It can happen to anybody!
What about the round rolling tumbler sharpeners with stones on either end that are advertised now. It seems useful in that they hold the knife at a constant angle with magnets.
What is your opinion of these sharpener systems?
i have 2 of theses they are one of the best mini sharpeners I have tried!
Like yourself I have bought many. So I am trying this one and just placed my order in. Will let ya know.
I guarantee you are going to love it!
Good video!
Glad you enjoyed it!
I've had one for years. It's awesome!
Right on!
I love mine
👊🏻👍🏻
Get a Scandi knive and a cc4 fällkniven stone. Thats all you folks need
Get a blue paper steel Higonokami and a super fine ceramic rod. That's all you folks need 😉😊
@@jimmy66603 Sure. Try batoning with that little thing. Good luck
Perfect for hunting / fishing trips.
Yes it is!
This is awesome. I've been looking for a way to get that kind of edge on knives. Definitely checking this out. Thanks brother
Glad you enjoyed it!
It is a good sharpener but it is not tenstrokes it's thirty strokes
@@keviningles5580Could be 50 strokes or 5. Depends on how dull knife is, how worn diamonds are, how much pressure you use. I keep all my knives very sharp so a few strokes would get mine back.
Where do u buy all the replacement sharpeners for this sharperner? please send me the link, thank you.
Would this work well with Swiss Army Knives? What about the Swiss Army Scissors?
Good field tool. Wish it had the reversable (20 degree to 17 degree) guides that the bench sharpener does.
the secret to sharpening, hold the blade at the same angle on every stroke
Very good video Matt! I have a Lansky kit but the one bad thing about it is that it isn't descriptive on what angles are at each hole nor what angles I should be using. Thanks!
I've used the lansky for a long time and It is decent, but I get way better results with this!
I love this sharpener, I use it all the time.. Best bucks I ever spent on a sharpener !
I agree 100%. Do not waste your money on small slide through knife sharpeners. For the price, this is the one to get, and it will be useful for all kitchen knives as well, including serrated bread knives that you can sharpen using the rotating white ceramic rod or the small rod on one side.
I have the same sharpener on the opening. 2 diamond surfaces, ceramic rod and leather strop. An all in one that works great.
And I am in Costa Rica.where much as this is hard to impossible to find.
My best friend dang near cut his finger off after sharpening his knives on this sharpener. After that I was sold. I bought two of them. One for my work bench, and one for my pack.
Does this work for ceramic knife as well?
Does it work on a chisel grind Karambit?
Where do you get the replacement stones
Can we us it on a rotary shaver or a razor?
I know many people need help with sharpening...not everybody has the time to learn to freehand. But, it IS A SKILL that can be had with no fancy helpers. Or $$$
So if you’re using it on a blade for the second time instead of step 1 where do we start? Step 2? Just the strop?
Love mine. Best $30 I’ve ever spent!
Yes sir!
Havent had much luck with this sharpener or the Work Sharp Ken Onion!
Put a sharpie mark along the bevel and as you sharpen you will be able to see where you are removing metal. Keep going on coarse till you grind off all black marks. Then repeat on fine.
@@imgadgetmanjim Are you the kid in the video?
@@bobskaftfeld5611No.
I love those! So much so, I bought two of them. I keep one in my backpack, and one in the jeep. I also got one of the WorkSharp Precision Sharpeners, and for $50 it can't be beat. It's definitely not the nicest sharpener in the world, but it is pretty amazing. I double-dog dare anyone to find a better value for the price. I REALLY want to try the upgrade kit for the precision sharpener. I hear it really completes the set for people addicted to blades.
Right on! You can never have too many sharpeners on hand!
Will the Knife Sharpener work on M4 Steel? Like at least bring a factory edge to scary sharp?
Yep.
The thing I like about this is I've been sharpening my knives on the bottom of a ceramic coffee cup going by to the sixties when my Mama taught me how.
Are these fine for kitchen knives? Or more for outdoor ones?
It will sharpen kitchen knives just fine. Knife is knife. :-)
Is it ok to hone at 25° after sharpening at 20° i have ome of these but cannot seem to get a knife hair shaving sharp no doubt its my technique but eager to learn
Scrap my last comment I just tried it exactly as you showed and it does indeed shave thanks for the video
I find that if you hold the knife with your index finger on the side of the blade and your thumb on the top or bottom of the handle it will lock your wrist for more accurate repetitive strokes.
I have a simpler version of that sharpener.
It’s my favorite too.
That and the top of a car side window.
I’ve done that before as well!
What about Serrated blades?
You should explain raising a burr.
How do you clean and maintain this sharpener?
Sharpening stone can detach from the sharpener, you can wipe ceramic rod with cloth, with rotating. You will most likely not going to clean leather.
Do you have to put a compound on the strop?
Yes, usually green rouge/stropping compound.
What if you have a longer blade say five inches?
so how do I know I have a burr. for that matter if I am new to this what is a burr? everyone talks about it,
Can you use this on large kitchen knives?
Yes, absolutely. They make a bigger tabletop unit which would be better, but this still can work.
Where can I buy that green rouge paste for my strop?
Amazon is probably the best place. Also, local jewlery stores will probably give you some if you ask.
Got one last week for $33.00. My one big complaint is that my knife was too sharp. I kid you not, a slight touch of the blade resulted in a deep cut.
Be careful kid, you shouldn't be playing with knives until you understand the damage they can do
Does this also work for Karambit style blades?
I recommend a system like the Spyderco Sharpmaker for something like that to be honest. BUT, you might be able!
Chef's Choice Model 130 for most work around shop. This looks good for field work.
Not sure if his knife could have cut the paper at the beginning and he was pretending it doesn't cut 😂
Hahaha, I promise you it didn’t!
Wait....was stage 3 course ceramic?
Did he change knives?
Having declared my dissatisfaction with this sharpener last night czcams.com/users/postUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ I thought about the problem some more. It occurred to me that I might be undoing each attempt at achieving a sharp edge by the repeated attempts. So, I tried to clean up the unsatisfactory result by honing with only positions 3 and 4.Miracle!! A really nicely sharpened chef's knife, more than enough to handle my needs. Admittedly, it did not reach professionally sharpened razor-fineness, but it is now significantly sharper than it was. A bout of breaking down carrots convinced me. So, major apologies to the manufacturer, Amazon, and all happy and potential owners! Follow the directions: don't buy it if you have ceramic blades; and don't overwork your knife blade.
😮
🙂
Sure wish these weren't unavailable now.
It is a good product, mine just was made poorly, the coarse plat didn't last sharpening one small knife, the diamond dust literally peeled off wirh every pass of the blade. Hopefully work sharp only had a bad batch with mine.
Just use the belts from that same brand.
Most efficientl way
I never sharpen fishhooks cause I lose them too fast.
Come to think of it, I *use* to be that way with pocket knives!
Maybe I *SHOULD* get a "Work Sharp..."
*smirk😏
Hey you forgot the broadhead wrench under the diamond plates. This can really save your fingers, believe me.
Where to buy one?
They are posted in links above 👍🏻
I got one for about 2 years now. It's good. But I prefer my dmt diamond card stones. The corse side is really really very corse. And the ceramic rot and strop are little to small.
Good to know!
I thought the same w the super low grit on the course side... way to rough
Would be neat if you could swap in other angle guides
That’s a great idea
It's $30. They've got basic sharpening for most people down to a fairly easy operation. You can buy the guided systems and get the perfect angle you desire....
I need a 25° angle. This does not help me unless the angle can be changed.
*knaffff*
What knife is that
That is the Cold Steel kitchen pairing knife
I’m going to give you a dull m390 to sharpen. I’ll wait.
Haha, is it a Microtech?
Doing it free hand like this,you can't get exact angles on the edge.
Can i get the link yo get new plates
چرادربازارموجودنیست این محصولات🤔؟
it doesn't work on bowie knives. its really weird. it cuts through boxes, but it leaves tiny tears on the cardboard boxes when i slice into paper or anything like that.
I just bought one and did exactly what you did in the video and it does absolutely nothing, please somebody help me
What steel is your knife? Start at the coarse grit and raise a burr before switching sides.
Dremel not good for sharpening , too ?
Not for sharpening knives
Actually magazine paper is easier to cut verses other types.
The main issue is the human hand keeping the same angle on the blade on the surface.
not all knives are meant to be sharpened at a 20 degree angle.