Knife Sharpening That Doesn't Suck! // Work Sharp Precision Adjust Elite
Vložit
- čas přidán 19. 05. 2022
- Check out a little something we have been working on: fortwild.com/
For years I've been sharpening my knives on a stone with good enough results. My knives are tools and I never fussed too much with polished edges or razor sharp finishes. I have used just about every sharpener known to man with pretty good accuracy but never bit the bullet on one (mainly because I had free unlimited access to all the sharpeners for years). I'm a bit of a Luddite so for certain things my motto is if it's not broke don't fix it. My buddies over at Work Sharp sent me over their new Precision Adjust Elite sharpener to check out. They didn't send it for me to make a video, or to shill anything to you guys, they literally just sent it for me to check out which was really nice of them.
I find that I learn a lot about a thing the very first time I run through it so I thought it would be fun to bring you guys along as I figured out this new sharpener! Not only did I get a razor sharp edge on my WE Banter I also got a bit of that 'polished' look! The Precision Adjust Elite turned out to be easy, intuitive, and (after some figuring out) a very effective system for excellent knife sharpening. I'm definitely not a knife sharpening expert and I hope in this case that's a good thing as we both got to learn together.
You Can Get Your Own Precision Adjust Elite Here. Bang for your buck utility on this thing is amazing! I'm not making any money off this link but it helps my buddies at Work Sharp out and it was super rad of them to send one over to me. bit.ly/3NsHhcI
Follow along here for more adventures: zacinthewil...
One thing that I always make sure to do when going for a nice looking edge, not just sharp, is to wipe the blade down with a cloth (wet or dry) to remove the grit that might be on the edge from previous stones. When you get to the finer stones, the previous larger grits can make gouges in the finish and you would then have to go back through the progression to remove those scratches. You will still get a great cutting edge, but if you are chasing that mirror polish, wipe it down between grits.
Great tip!
That's good advice. I ran a custom woodworking business for years and was constantly trying to improve the edge on my lathe chisels and blades. I spent years trying to work out the kinks but wiping the blade/tool off during sharpening is VITAL. Those microscopic metal shavings can have a dramatic impact on the final edge.
This is great. Thanky
Very good point! Using “Windex” does a great job removing the embedded metal shavings in my diamond stones, so they continue to cut effectively.
If you want to precisely see the original angle a Knife is sharpened, using a marker on the edge and softly work on the edge a stroke or two, look at the edge and readjust the angle according to the marks on the edge
Also, after using the ink on both sides of the profile, I use a jewelers lens to make sure that equal amounts are taken of each side, and that the 2 sides are apexing at the point of the knife making sure they meet. This must be done when setting a new profile, which any sharpening system will have to, as it varies from the original grind
This is a fantastic trick! - Also -
The manufacturer of the knife should be able to tell you the angle of sharpening.
Victorinox 91mm knives are 15 Degrees. - That is all I know :p
Thanks for the information. I was wondering how to determine the proper angle but didn’t want to ask a stupid question.
I was thinking about ordering this system so when I saw this video I watched it and I just ordered it from the link in the description. 👍
@@TeddDecker This is a great tip as in my experience many knives(especially those w/ full flat grind) don't sit in the clamping jaws perfectly in the middle. I've noticed this in cheap sharpening rigs and my TSPROF.
Will be purchasing one of these. Thanks for the great content.
Awesome to see you and Jaime together again! You two are the reason I got into knives!
I love sharpening my knafs and this system makes it soooo easy! Great to see you and Jaime making some great content like this.
I’m really digging the simplicity of it!
I have many many knives folding and fixed blade. And have been on the fence about what system to get. You Zac are making me take another look at the work sharp. Nice write up 🤘🏻
When it first came out, this Work Sharp was the first "rod" system that I saw that was a reasonable price, not that big, and good quality. All the others seemed to be huge expensive things.
Back in the day I carried the lansky system in my rucksack. It is the same concept as this but breaks down into a skinny little case.
My platoon members always gave me their knives to sharpen.
I now have this new work sharp device and I love it.
I have that one too, it's great 👍
I never go by number of strokes. I adjusted the o rings on mine to be able to do passes across the full length of the stone rather than abusing one small section of the stones. I go by feel and how the knife edge looks since I've used it so many times. Also, when you finish with whatever passes you do on each stone, do one full pass strictly pulling towards you. It makes a MAJOR difference in my experience.
Pretty much came to say the same thing
i wish i could save this comment for when i get one
@@bootymagician you get one yet?
@@snoopywl8880 not yet
@Not Milk I picked one up but I haven't tried it out yet just been watching videos on how to use it
Really glad to see you and Jaime doing videos again. You need to have a few guest appearances by Ben (and Athena, who we know is a major force in that operation). Great video!
Definitely!🤘
100% agree!
I have the original unit, and, I found that the stones would eventually start to " bind" ,on the rod. Spraying a little pure silicone oil on the rod smoothed things up, nicely.
Thanks for the video. I’m sold! Great to see your videos again and miss your personality on that big knife outlet channel. Happy New Year!
Man I've had this in my cart for a while but was hesitant. No more. Great video, thank you !!
I was finally able to catch up on the videos that you’ve posted more recently. Happy to see any new content from you, man. Doesn’t matter to me if it’s knife, van, shop, philosophical, or whatever (although I am glad you covered this sharpener as I’ve been eyeballing it for a while). I’ve always loved your attitude and outlook. Keep it up!
Thanks man! More on the way🤙
Zac You’re doing an excellent job. Im a knife fanatic too, but been loving your non knife content also. Definitely tons of interesting things to watch you do. Thanks for the content brother. Good seeing you regularly. ✌🏽
Thank you so much for tuning in!🤘
Thank you, great video. I've been the same with sharpening stones, and recently purchased this sharpening kit! I haven't used it yet, so appreciate this video as you've inspired me to sharpen my knives!
Do it! It’s a great system.
So glad to see you back on your own channel. I own the standard precision adjust model and I just love it. Been sharpening knives of friends and familly ever since. Looking forward to see more cool videos from you.
Glad you found me! 👊
Glad to see your smiling face again! I bought a WorkSharp system a couple of months ago, and you just motivated me to get busy sharpening my knives! Thanks. Keep the content coming!!
More on the watt! Glad you dug it.
I own a works sharp, its more or less the best kit UNDER 400$ (when I bought mine) I had a huge knife collection of dull knives. Now I enjoy using them again. Great vid!
I have used/tried several “guided sharpening” systems over the past several years and can’t see ever going back to a freehand sharpening technique. I could never get a freehand edge as sharp as a guided sharpener system. The consistency of the angle makes all the difference in my experience. This seems like a well designed product and I am sorely tempted to pick one up!
I've always had trouble freehand sharpening getting the angle consistent through the whole process, this system has definitly made my life way easier. Definitely recommend it, would say to go ahead and spend the extra on the elite though. More money but it would've been cheaper than buying everything separate.
Same I’be been knife sharpening for about 3 weeks and I can get the knives sharp with my whetstones but not ultra sharp like the guys in the videos.
Same, i have the worksharp guided field sharpener and ken onion edition and both help get a sharp edge, especially impressed with the guided field sharpener
I just got mine today and was using it while watching this video. This system most definitely works. Money well spent. Took me only about the length of this video to get two blades razor sharp.
I wanted to say i really enjoyed the learn as we go attitude and your personality was much better than an infomercial or sales pitch. You hit on most of the crucial steps of sharpening, for a novice, was really good. Minor things to help with it, the "number of strokes" is whatever it needs to be. start coarse, get the bur. before switching to the next stone, use a light single stroke on each side a few times to straighten the bur before it gets broken off into the much finer grit, it makes a nasty crunching sensation, just wipe the stone after the first stroke on each side until it goes away, then do your counted number of strokes per side to get the bur and remove scratches. Crucially the last and only other missing tip for a razor edge, is as described above, do some light straightening strokes to straighten the bur before your strop. the dramatically helps fine ness and speed. (Machinist, knife maker, sharpening freehand for 20 years)
My son got me this system for Christmas!! Thanks for the tutorial! Can't wait to try it out!
Zac , my extreme thanks to you for the great video. I bought the system , and it worked wonders on my custom titanium Bugout with CPM-S90V. Just an fyi, there is a simple way to compensate for the flexing that occurs with the clamp; just use the free hand to grip the base and the four fingers to apply a slight amount of upward counter pressure at the rear portion of the clamp vise. The four fingers are safe since they are not near the blade's edge. Also, this grip technique helps establish a crisper edge with a more accurate angle.
Your stroke technique is flawless; good work!
Great video, just got mine today, waiting for the weekend! Thanks for making this, convinced me to buy this system.
Happy to see you creating knife videos again! God bless
Thanks! Mixing all my passions in here.
Super relaxing to watch. Might be a future purchase for my knives.
"We're going to learn together".... you are awesome man!
I love Work Sharp products. I have and use their Ken Onion Elite system. Love how simple yet super fast it is.
I recently bought the kit that just has the one tri edge. My dad had a kit similar to this many years ago, and I’ve always looked for something similar. This is it but better. I was impressed with how quickly it can sharpen knives.
This is such a good system. Thanks for the great honest review!
If this is not a paid advertisement it should have been. You convinced me, I'm going to buy one!
Bro I'm so happy to see you doing videos like this! Don't know the full story about you guys leaving BHQ but BRO has the quality went down over there since you guys left! I remember I couldn't wait for week 1 Wednesdays they were so awesome!
This sharpener is legit. Bought mine a few months ago and it puts an amazing edge on a blade. I use for my kitchen knives, pocket knives and everything in between.
Yes! “That sound… is it ok?, is it not?”. Keep doing these videos man, I really enjoy them.
There's plenty of variations of this system already on the market .
i use to be obsessed about super sharp knives but finally realized that an averagely sharp knife , what ever that is , will suffice in 95% of what i use a knife for . i still use my belt sander for most sharpening .
Great video! I am definitely planning on getting one of these! Might I say one thing to Work Sharp? Maybe they could add a detachable lever lock suction cup for a batter way to lock the system down. I'm ambidextrous, but some folks who may not be, might feel a little more secure if it locked into place on a smooth work surface. i.e., metal or Formica type countertop. Thanks for this video!
I just bought. It comes tomorrow and I’m excited to sharpen some knives. I have their hand held belt sander, but never got a great edge with it- I bought it like 12 years ago. This looks much more refined. Can’t wait!
I did four blades on the worksharp that I've only just gotten. It's the one with 320, 600 and ceramic. Free handing the final leather stropping. They might not be sharper than my stone sharpened blades. But the edge is way more consistent, only getting the slight angle change towards the tip.
It's such an easy thing to use. Pressure going from light to near none
I’m so glad the work sharp sharpener, I had mentioned in a few videos back that I’m still new the knife hobby and started around the time you started doing the videos with Ben and I’m not a pro at sharpening either and I’ve owned the work sharp for about six months now and I use it to sharpen my work knife, my plain S30V shaman and I can get a decent edge on it. I’m glad I’m not the only one out there that isn’t a pro sharpener. Thanks Zac
Sorry, I really need to proof read before I hit send. I’m meant to say I’m so glad that a you like the work sharp too and that I’m not only one out there that loves knives but maybe doesn’t feel like the best sharpener.
We all have our strengths and weaknesses for sure😁
I love the shaman, that's my work knife as well. I also sharpen it with the worksharp, it's a good system for the money
Thanks for a great video!... You won yourself a new subscriber! I've had the worksharp precision adjust for the past 2 years!... Great system that works fantastic!!! So simple and easy to get any knife shaving sharp!!! 👍🖐️🍻
Thanks for the sub!👊
When I'm at home I have always just used some flat stones of varying coarseness and a ultra fine or ceramic to finish it off. I get it pretty sharp but not mirror or even close, just a good working edge. However, day to day I have typically just used my little pocket sized Lansky Carbide/Ceramic sharpener that has little rod for serrated edges. That little sharpener will put a decent edge back on a pocket knife in about 3 to 4 minutes.
Love your stuff sir!!! So glad i found your channel.
Glad you found it too!
This is first I've seen or heard of this particular system. Looks like a good setup.
I’m really enjoying it🤘
I bought the original system when it came out and loved it! When they came out with the elite kit I upgraded! It's a great system it's fast and easy to get a razor edge on just about any knife! I can use a stone about like you I can get a decent edge but never as good as with this system.
Christmas gifts for my brother and uncle! Thank you!
Bought mine about 4 months ago, but still have yet to try it out. This reminded me to finally get going.
Thanks for this video. I've been looking for something like this.
Just got mine yesterday, sharpened my SOG Seal XR. Love this thing. Mine only has the one tri-brasive rod though.
That company that you used to work for does not have good videos like they did when you were there. Glad to have you putting out videos regularly.
I never advanced beyond the sharpening stone, but did learn there are better types of sharpening stones. I don't use a "system" unless I come across a blade that needs reprofiling, and when I do, this is the type of sharpener I use. Nice video, thanks!
Stead fast and loyal!!
Wife got me the Work Sharp with one 3 stone insert, WSBCHPAJ for Christmas. I got my Civivi Elementum with D2 steel to shaving hair off my arm sharp in 10min or so of fumbling around learning how to use it. This is one great system for guys and gals who don't have a big stone system or the time to learn how to use them to get razor sharp blades.
The consistency is amazing, only thing I’ve had to watch is making sure you don’t have to much pressure applied or you’ll find over time that the angle adjuster can be accidently changed by unscrewing. I’ve seen some people use the system and claim it doesn’t provide the ability to achieve a mirror finish. That isn’t true, what they fail to do is spend the time to achieve that finish on the finest stone. You have the ability to refine it further with a strop. But the finest stone they provide can and will give results.
I have 4 of the work sharp units and love them all
It amazes me how great this product is. Simple works great easy to operate.
Agreed!
Good video, good information. This sharperner system is similar to the Lansky system. That system has a fixture that you attach to your knife, basically two L-shaped brackets with holes on the long side of the L. Those holes determine your sharpening angle. The stones themselves are similar to your system however they had guide rods that passed through the bracket holes. The Lansky deluxe set also had a stand to place the sharpening fixture into while sharpening. Thanks for the video.
I have a Lansky system and I can tell you just from watching this video that the Lansky system is far inferior to this rig. I've bookmarked the link for this system and will be buying for a birthday present to myself in a week or so.
I have had one for a while now and have loved it. I would like to see a full knife collection tour. Keep up the great work.
Full knife collection definitely coming at some point. It will be a long one😁.
Do you have the elite or the base model
@@givematthiswalrus4825 I bought the base model then purchased the upgrade kit.
@@grantsimms2009 👍
!!!awesome brother!!!! There's just nothing like having your own work shop!!!!! You can make it any way you want!!!!!I love the system!!!and as I'm sure they're not expensive to replace.. I'm just wondering how long the stones last!!!!!and yes please please please do workshop videos.... we'll take anything lol motorcycles, shop projects, modding your knives doesn't matter lol we're just so happy your back making content... love you brother!!!! Please say hello to Kyle, Jamie and Kurt if your still in contact with those guys!!
I’m so stoked for the new shop! It’s a huge thing for me! Glad to hear you’re down for shop content! I’ve got some plans for sure. I’ll tell all the guys you said hi👊
Glad to have found your channel. I really enjoyed your vids at Blade Hq. Good to see you back. Great content my man.
Glad you found me!
I just picked up one of the basic Precision Adjust sharpening systems today from Work Sharp. I wanted to see how well it worked before I went all in with it. For me it was a game changer. My old beat-up knives that I thought were hopeless are back in operation. They are way sharper now than they were after hours of work on a traditional stone. Not the stone's fault -- I just couldn't get the hang of it. But this product is easy enough to use, there isn't much you can do to screw it up.
Am the same it’s my favourite system this and I just have the base model got my Victorinox huntsman and spyderco hair shaving sharp without the extra grits
I never learned on a stone. I always struggled with keeping the right angle across the whole edge. So i bought a lansky and have been using that. I may upgrade to this now
Love this sharpening system!
Doesn't matter how clumsy you usually are. As long as you follow the instructions, you will always achieve a razor sharp knife edge with such a sharpening rig. Always. 👍👌
Great video man. Im glad you stuck with you tube after leaving BHQ. I dig your content man! One thing, Ive got this same system also and a little tip, move those O rings down/up the rod so that you can use the whole stone. Someone prob already mentioned this, but I didnt want to read all 200 comments to find out.
Anyway, Thanks again man, dig the content!
Thanks for the tip!👊
Hey Zac, you can also buy attachments to use better stones and a brace for the clamp. Trust me when I say get the clamp. It helps so much with keeping the right angle.
Great to know! I’ll check it out💪
The brace for the clamp is a must for heavier knifes you can visually see the clamp start to droop throwing off the angle.
@@jamesthorn2585 is it from Worksharp or a 3rd party?
@@jamesthorn2585 I’d love to know as well.
All the ones I have and have seen were on Etsy mostly all 3d prints if your a wood worker I'm sure you could make one yourself.
I'm no expert, but I would definitely use the Sharpie method for finding the angle here, then make notes on each knife for future uses. I'd also cover the entire length of the blade with each pass. One little section of the blade at a time seems like it would create some inconsistency. I do like the system.
I love my Precision Adjust! It is such an excellent system for such a reasonable price.
Such a great bang for the Buck!
I hand sharpen mine and others knives with just a few different stones and I can get it sharp enough to shave. I'm not doing anything commercially so no need to have exactly the same edge. My hand is pretty steady anyways. I can see sometimes I do have a bit of a different angle but everything still works and is super sharp
As a pro sharpener nothing will replace the bench stones!! I own a ton of sharpening gizmos and my go to are always my shapton stones
I'm glad you guys are back you were by far my favorite knife youtuber and it was disappointing to see you go
Glad to be back!
I definitely need to get one of those! I’ve got a few different sharpening systems, but I haven’t mastered any of them.
One of my favorite edc knives is my 940 Osborn. I have never been able to get that thing sharp. It’s always just so so. I’d love to see if that work sharpe could fix that problem. That way I could start carrying it again.
Congrats on the new work shop too 🤘🏼
Haven’t tried the 940 on this yet but I would guess it would with how well it did a few tantos. Thanks!
I have the work sharp eletric sharpener and the the stones iv tried 20 25 degrees every thing but i just cant get them super sharp i would like to try this. Im frusterated 200 strokes later and im kinda sharp
I’ll usually mark the edge with a sharpie and see where it goes away on first stroke at 20° to check my angle if I’m unsure.. this sharpener looks legit. I might just try the basic model, but I’ll probably suffer from FOMO if I don’t get the elite.
Luv the field sharpener - very satisfying-- that bad boy just made the must have list - 🍻👍💥😎
Excellent video as I am considering purchasing this one
A man of culture I see. I have that sharpener, and that exact hat. Great taste my dude.
I've wanted one of these for a while now. It just seems like such a convenient way to sharpen a knife, without relying on electricity or pure free hand sharpening. Because electricity is basically magic that I don't trust (I am but a dumb lawyer and not an electrician, which I am convinced requires greater intelligence), and I've tried free hand sharpening and i'm not great at that either. So this seems like a fantastic option! Anyway your videos are awesome Zac! I look forward to them and rewatch the old ones! Fantastic stuff!
For a lot of years I would always say I knew enough about electricity to get my self killed🤣. Electricians are definitely magicians. Thanks for tuning in!👊
As an electrician of 15 yrs I can confidently say your opinion of our intelligence is misplaced to put it mildly. Basic requirements for the job. 1). Not color blind. 2). Ability to count to ten. That's pretty much it.
I've got the same tool box for my knife collection. Great minds think alike.
Thumbs up for Zac. Thanks for keeping it positive brother. God bless
Doing what I can😁👊
Just a thought..saw a crazy expensive Russian design you could "add on" stop collars at the ends of the sharpener rod...it baffled me for a minute & then it makes GREAT sense as those allow "max travel" ea pass so that ur stones...or even films, will wear evenly...
This is a great video. Thanks for showing off this system. I already have a Work Sharp’s Ken Onion belt sharpener and it is awesome for larger tools and knives. I have sharpened sheers and a blender and a bushcraft knife and a couple of cleavers and a bunch of kitchen knives with it. All my pocket knives with super steel blades I sharpen by hand with DMT Diafold diamond plates. It works fine and they get REALLY sharp but I can see the variations in angle all the way down the bevel. This looks like a great lower cost option over the KME sharpener. I’m totally getting one as soon as I save up a hundred bucks. Awesome!
Glad it was helpful!👊
Dont no what it is but i cant get my knife super sharp with the belt im mean it will cut paper if i hold it at the right angel but not straight
@@keviningles5580 the belts are an aluminum oxide abrasive as far as I know. Have you had better results with another type of sharpener?
@@beyproctor7673 stone but i stiill want it sharper
My Lanskey does the same thing. I love it.
I love that this made you giggle.
I had always sharpened my knives with a couple of stones, and managed to get them shaving sharp with some time and work.
I splurged and bought one of these, and I have to say it was the best thing I have bought in a long time.
I can sharpen any knife in the house in under 10 minutes, with no effort. The secret is to not put a lot of downward pressure, and let the stones do the work. Start on one side, and go until you feel a bur on the backside of the blade. (Try to keep track of the number of strokes you made) - Flip the knife over and repeat...gradually work up to the finer stones using the same technique. (I only use the 220 if I need to re-profile) - I use the 400, then the 600, then the ceramic, and close with a couple of swipes with the leather rod.
It is also helpful if you keep track of the angles you use for your knives. I like 15 on the kitchen knives and about 22 on EDC blades. I have sharpened as large as an 8" kitchen knife, not sure how it would handle blades larger than this, but I think you would have trouble with larger blades unless you were using a larger angle.
Great video! Very engaging. Thanks! I would some sharpie on the knife edge and run the tool across at a high grit once or twice and see if it taking off all of the black marker and adjust accordingly. You won’t worry if your knife is ok anymore.
just purchased this and am headed to the shop shortly to try it
Good job Zach, like all your videos
looks great Zac. I'm going to order one...
Nice to come across this system... And good video. Might be the one I get
Just got mine today, and to keep it simple, it’s badass, wanted to really test it and did what any knife enthusiast fears, got my knife and rubbed it on a brick then whacked into it, to say the least my knife made a full recovery and even has a mirror polished edge
Great video. I’m sold, just ordered one.
I'm an absolute newbie when it comes to sharpening knifes to a really nice edge, this is a tool for me. :D
You had me laughing with you from your excitement. Going to buy one now and giggle my way way to sharp knives
Good video. Nice new teeth.
Th WSPA works great for me.
I can get mirror bevels, but I usually don’t. I prefer to leave a more toothy edge.
I’ve modified mine.
Oh shit! you brought Jamie with you!? Awesome!! I also finally bit the bullet on one of these sharpeners and regret NOTHING. Looking forward to more of your videos.
It is a good one for sure!
Having declared my dissatisfaction with this sharpener last night czcams.com/users/postUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ I thought about the problem some more. It occurred to me that I might be undoing each attempt at achieving a sharp edge by the repeated attempts. So, I tried to clean up the unsatisfactory result by honing with only positions 3 and 4.Miracle!! A really nicely sharpened chef's knife, more than enough to handle my needs. Admittedly, it did not reach professionally sharpened razor-fineness, but it is now significantly sharper than it was. A bout of breaking down carrots convinced me. So, major apologies to the manufacturer, Amazon, and all happy and potential owners! Follow the directions: don't buy it if you have ceramic blades; and don't overwork your knife blade.
Looks pretty cool, and I'm sure it works well when new.
Myself, I will not spend that much on anything with a plastic base and assemblies.
Thank You for the demonstration.
Tsprof, Hapstone or Jende JIGS is the way to go imo
@@phillipendersby6964 Agreed
@@phillipendersby6964 know my blitz 360 will outlive me, and probably whoever I hand it down to, well worth the $300, and as a lover of tools, the precision machining just makes it a joy to use.
I just ordered this from the link in the description. 👍
I have the basic Work sharp precision adjust sharpener with 320 & 600 diamond plates and ceramic polishing stone tri - brasive. It's made sharpening a breeze for every knife I own *except* for my recurve blades and my very thin Laguiole knife. The Laguiole knife is only 5/8" wide from spine to edge so it will rub the clamp at anything shallower than 23° which is ok, just not razor sharp.
For my recurve blades I use a cheap Lansky crock stick sharpening kit with medium and fine rods. Surprising easy to keep them sharp, but reprofiling is difficult. Might need a coarse rod for that.
But I love my Work Sharp. Wouldn't mind a second set of tri - brasives though 😉 I haven't used my flat stones for anything except my chisels since I got it.
It's that good 👍
After watching this video I ordered a Ken Onion model. I presently use a KME and can’t wait to replace it!
Sold: off to Cabala’s to purchase the Work Sharp Precision Adjust Elite Knife Sharpener kit. Thank you. 👌🏾