328i, 335i, 335is Fuel Pressure Regulator/Sending Unit Replacement DIY

Sdílet
Vložit
  • čas přidán 22. 01. 2021
  • Here's how to change the Fuel Pressure Regulator on you 328i, 335i, or 335is, they're all the same. The removal tool has always been suggested to me but it's really not needed. Hope this video helps.
    #BMW #DIY #N54andMore #E92 #E46 #E36 #Vlog
  • Auta a dopravní prostředky

Komentáře • 86

  • @juanrocha7965
    @juanrocha7965 Před rokem +1

    Steps are practically the similar for 128i. I appreciate it. 🐐🤝

  • @brandondarnes3699
    @brandondarnes3699 Před 2 lety +2

    Great video! Gotta do my sending unit tomorrow

  • @nicholasjones914
    @nicholasjones914 Před 2 lety +2

    Great instructional video! After doing the valve cover gaskets on my own I was terrified to tackle the fuel pump until I saw this. Thank you.

    • @n54andmore56
      @n54andmore56  Před 2 lety +2

      Man, I really appreciate that, I'm just happy I'm actually helping people.

    • @nicholasjones914
      @nicholasjones914 Před 2 lety

      I was hoping you could help me out with 1 more thing man. The car I'm working on is a 2011 328i. It only has 1 unit on the passenger side under the back seat with (1) 6 pin electrical connection. When the owner ordered the replacement pump they sent her the pump and the sending unit and both have (2) 2 pin connections. Did she receive the wrong parts or is there some type of adapter we need to get? I can't find anything online. Thanks again.

    • @hectorespinoza7641
      @hectorespinoza7641 Před 6 měsíci

      How hard would a valve cover be on someone that has no experience with cars?

  • @eddyc5604
    @eddyc5604 Před 2 lety +2

    Great video doing mine today thanks for the perfect advice 💪🏼

  • @E90stylin
    @E90stylin Před 2 lety +1

    I'm about to tackle this job myself... 07 E90 N54... has 202K miles and FPR is leaking at the top. Advise for all, it'll be easier to drain (or drive off) as much gas as you can to lesson the mess w/ gas getting on the way of the job. Great job w/ the video editing and such...

    • @n54andmore56
      @n54andmore56  Před 2 lety

      Thanks and thank you for the input, you're right. I forgot to mention that. Good luck on that FPR job.

  • @AnthonyMoreno-ky3px
    @AnthonyMoreno-ky3px Před měsícem

    hey hope you’re doing well, i have a 2007 bmw 335i and my gas gauge fluctuates if i’m driving fast and i was recommended to do this (your video) does that sound right to you?

  • @yoshixx1238
    @yoshixx1238 Před 5 měsíci

    What do you do to the level i saw you removed the square and i cannot see if you change the position of that part???

  • @chrishuang9097
    @chrishuang9097 Před 9 měsíci +1

    Hello, I just try to remove the driver side fuel filter. But when I remove the black fuel pipe, the fuel came out and it didn't stop like you have. (01:52 in video)
    will the fuel come out just temporarily? I just stop in case of huge amount fuel leaking.

    • @n54andmore56
      @n54andmore56  Před 8 měsíci

      You have to let the car sit for a bit or disconnect the negative terminal so the full pump doesn't prime.

  • @VonB3
    @VonB3 Před 9 měsíci +1

    Watched your video and it helped, even made one so I can remember the process, but when I fill up it only reads 1/2 or 3/4 sometimes, any fix for that?

    • @n54andmore56
      @n54andmore56  Před 8 měsíci +1

      Could be the cluster.

    • @VonB3
      @VonB3 Před 8 měsíci

      @@n54andmore56 I’m thinking the same, thanks!

  • @rdumit
    @rdumit Před 2 lety +4

    Thanks for the Great Video!! One question - how would you prime the fuel pump?

    • @n54andmore56
      @n54andmore56  Před 2 lety +5

      I normally just turn the key to ignition like 3 times and then try to start it.

    • @rdumit
      @rdumit Před 2 lety

      @@n54andmore56 Thank you!

  • @Khercules
    @Khercules Před rokem +2

    THANK YOU FOR SHOWING ME HOW TO DISCONNECT THAT PESKY FUEL LINE!!!! jeez. Every video I’ve watched until now assume I work on fuel lines daily or something.

    • @n54andmore56
      @n54andmore56  Před rokem

      I'm glad I could help, let me know if you need any other videos specific.

  • @1993inlove
    @1993inlove Před rokem +1

    Hello, my 328i fuel gauge was not working correctly, i took it to the shop and they replaced the fuel pump, 30min into driving my check engine light comes on and my fuel gauge is still not reading correctly. What could this be?

    • @n54andmore56
      @n54andmore56  Před rokem

      Might be a defective part or connected wrong, I would just bring it back to them.

  • @wyattpetty330
    @wyattpetty330 Před 2 lety +3

    Bruh people straight sleeping on this video This is about to save me a ton of money and keep my bills afloat. Good work guys!

  • @2b2bs
    @2b2bs Před rokem +1

    My hoses in my sending unit almost feel tight like smt is holding them or something what should i do again the tank behind driver side sending unit please let me know

    • @n54andmore56
      @n54andmore56  Před rokem

      Sorry been super busy. Did you figure it out?

    • @2b2bs
      @2b2bs Před rokem

      @@n54andmore56 i got it figured out brother thank you

  • @edwardmukaro7928
    @edwardmukaro7928 Před rokem

    E90 start sometimes hard start but fuel pressure is lol like it's blocking

  • @mothuup
    @mothuup Před rokem +1

    Good video!

  • @joecorreia613
    @joecorreia613 Před rokem +1

    Thank you.

  • @NA335is
    @NA335is Před 7 měsíci +1

    Hey Man. Hope ur doing well.. i just installed my fuel filter regulator before 3 hours and my car was on low fuel i did the job all after that i get my car to the gas station and fill it up to the max and then i see that my fuel regulator is on the middle 😢 and I didn’t know what could be the problem!! Any Advice?

    • @NA335is
      @NA335is Před 7 měsíci

      Also in 6:00 -6:20 in the video what did you do right there I didn’t understand also about the wires ??

  •  Před 8 měsíci +1

    I got this problem cuz my gas is leaking from the bottom on my driver back seat i gotta order that fuel pump you installed

  • @wrencheverydayohiyokosaima7257

    mine is leaking from drivers side only so i only need to do that side yea not both sides like U? Idk

    • @n54andmore56
      @n54andmore56  Před rokem

      So, if you can get the lines of then only 1 side is needed but I'm pretty sure it extends to the other side.

  • @keokiheller4351
    @keokiheller4351 Před rokem +1

    Aloha & Mahaloz from Hawai’i !!! I gotta do this one soon. Did u notice better gas mileage at all? My 08 335i sux soo much gas now!

    • @n54andmore56
      @n54andmore56  Před rokem

      Love seeing viewers from all over, appreciate you. He said he noticed a slight change but not much.

  • @hoghopper
    @hoghopper Před 2 lety +1

    Thanks!

  • @bigdeal87
    @bigdeal87 Před 2 lety +1

    What symptoms did you have when the FPR goes bad ? Thanks

    • @n54andmore56
      @n54andmore56  Před 2 lety +2

      Well this 1 wasn't actually bad. It was cracked and leaking under the seat.

  • @haolinzhang1112
    @haolinzhang1112 Před 2 lety +4

    Hi! How are you? I have some questions about my n54 135i fuel system. My car can not start when warm, it only start when the car completely cold down and it would shut down around 5 mins then will not start again. The no.70 fuse kept blowing every time it shut down, I have checked the fuel pump and ekpm are good, but I find out the ekpm overheating every time after the no.70 fuse broken. I have a fuel it stage 1 secondary fuel pump on it, I’m cannot find out where the problem is. Could you please give me some suggestions for it? Thank you so much!

  • @kristianelbaterista694
    @kristianelbaterista694 Před rokem +1

    There is plastic on the top, meddle of the tank. Do the sending unit lige go through there? I have an awful hiccup😅

    • @n54andmore56
      @n54andmore56  Před rokem +1

      It goes through the top of the tank on the inside.

    • @n54andmore56
      @n54andmore56  Před rokem

      It connects to the pump on the passenger side.

  • @kingbari3130
    @kingbari3130 Před 3 lety +1

    Sup bro I have a problem getting connection after I set it up

  • @samuelmauriciosanchezrojas2391

    Thanks 🙏

  • @2b2bs
    @2b2bs Před rokem +1

    Do all 3 hoses connect to fuel pump some how?

    • @n54andmore56
      @n54andmore56  Před rokem

      Yes, all 3 go to the other side. I think I said it right before pulling out the sending unit. If not lmk.

  • @garypoole6243
    @garypoole6243 Před měsícem

    I'm pretty sure you didn't show what the fuel pressure regulator looks like? And filter?
    you skip to the other side right away,
    Also I saw another video on someone else's channel and they said when your fuel pressure regulator goes bad you need to replace the whole fuel tank is that true or false

  • @oh_itsjusttavii8604
    @oh_itsjusttavii8604 Před 11 měsíci +1

    Is this the reason why my bmw shuts off and says fuel supply message?

  • @SoundChemist
    @SoundChemist Před rokem +1

    If you’re replacing the driver side only, you have to take out the passenger too?

    • @n54andmore56
      @n54andmore56  Před rokem

      Yeah because it's connected.

    • @SoundChemist
      @SoundChemist Před rokem

      @@n54andmore56 the driver side pump has the hoses that connect to the pump on passenger? or other way around?

    • @n54andmore56
      @n54andmore56  Před rokem +1

      @@SoundChemist that's correct.

    • @SoundChemist
      @SoundChemist Před rokem

      @@n54andmore56 great ty sir

    • @SoundChemist
      @SoundChemist Před rokem

      @@n54andmore56 i havnt drove car 3 days, i had all doors open, but i finished the pump, went to start motor and lights went dim no start lol

  • @tiaramariani1575
    @tiaramariani1575 Před rokem +1

    Hi I just changed out my fuel filter and now my gas gauge don't work and gas light is it has no reading what so ever would you be able to help

  • @salutbonjour123
    @salutbonjour123 Před 2 lety +1

    Next time do it as your tank is empty 😂👌

    • @n54andmore56
      @n54andmore56  Před 2 lety

      I should have told him that but I completely forgot lol.

  • @hectorespinoza7641
    @hectorespinoza7641 Před 6 měsíci +2

    Remember guys is better to do this on an almost empty tank

  • @DrizziG
    @DrizziG Před 3 lety +1

    I NEED HELP

  • @kwilliams1884
    @kwilliams1884 Před 2 lety +1

    Everything was all good up until the point where you did not show what lines for the regulator to pull out and connect...

    • @n54andmore56
      @n54andmore56  Před 2 lety

      Starting at around 3:00 minutes, I literally said exactly what to disconnect.

    • @kwilliams1884
      @kwilliams1884 Před 2 lety

      @@n54andmore56 I meant the reconnect portion. as I said everything else is good. the reconnect portion is where I got confused but I figured it out that was my first run. 👍

    • @n54andmore56
      @n54andmore56  Před 2 lety

      Well that's on me then, I say to myself "however it comes off, it should go back on the same way" but I could be more detailed. I just try not to make the videos too long.

  • @GolfGangOrDontBang
    @GolfGangOrDontBang Před 3 lety +1

    Why did you have to replace this?

  • @AnthonyMoreno-ky3px
    @AnthonyMoreno-ky3px Před měsícem

    hey hope you’re doing well, i have a 2007 bmw 335i and my gas gauge fluctuates if i’m driving fast and i was recommended to do this (your video) does that sound right to you?