How to Replace Rear Window Regulator 02-10 Mercury Mountaineer
VloĆŸit
- Äas pĆidĂĄn 25. 08. 2024
- Buy Now!
New Window Regulator from 1AAuto.com 1aau.to/ia/1AWR...
1A Auto shows you how to repair, install, fix, change or replace a slow, stuck, cracked or damaged window regulator. This video is applicable to the 02, 03, 04, 05 Mercury Mountaineer or Ford Explorer.
đ§ List of tools used:
âą Flat Blade Screwdriver 1aau.to/oag7/1A...
âą 11mm Socket 1aau.to/o4f/1AX...
âą 6mm Socket 1aau.to/oVn/1AX...
âą 7mm Socket 1aau.to/oVn/1AX...
âą Needle nose pliers 1aau.to/omr/1AX...
âą Needle nose pliers 1aau.to/omr/1AX...
âą Ratchet 1aau.to/oaiu/1A...
âą 3/8 Inch Drill Bit 1aau.to/oaf/1AX...
âą Drill
âą Painter's Tape
âą Razor Blade / Gasket Scraper 1aau.to/obU/1AX...
For More Info visit us at 1aau.to/h/beg/
â DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
â *Watch the Video*
â *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
â *Do it Yourself*
â *Save Money*
I have no idea why there are 39 dislikes. These are the best instructional videos on CZcams. Thanks for your great videos.
+George Thanks for the great feedback!
From mechanics losing money. They hate diy
This has to be one of the best how to do videos! Perfect step by step instructions. Thank you!
This video was absolutely perfect. Explained it to a T and I sure couldn't have done the job without it
There''s always something...Did everything like in the video. When I had it initially installed, when Mike says to plug in the switch to get the mounting point for the window (around 6:00 in video) in a good position to connect the bolt, it wouldn't come up that far. It just stopped. So, I had to take it out completely, hook up the connections and move that connection to a point I thought would be about correct. Reinstalled it, and was able to put in a bolt. The window works, but it struggles greatly to get the window all the way down. It's not normal, but it does go all the way up now, so I think I'm done.
good video though, couldn't have done it without it. And I did buy the part from 1A because of the help
Your video has all the details and worked fine for me - thanks. Ordered the part from 1A and did the install perfectly in about an hour.
+Mike DiFilippo Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY
thank you very much for a good job. Please ignore the stupid who criticize, they don't help the World. Blessings.
You guys are the best. Whenever I have a vehicle problem, I come directly to the source !A Auto Parts!!!!!!!!
+1cubaricua Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/window-regulator-rear-passenger-side/i/1awrg01710?CZcams&CTA+Comment&X_3MI
Got It Done Myself Thanks To Your Video. Thank you for posting it.
No problem. Glad to hear it helped you out. 1aauto.com 866-403-3393
Just did that repair this week, but had to replace the stationary window also.
Four removals, and two installations later, I have rear windows. (My working parts came from a donor) Awesome video. Thank you very much.
+Tyler Gauthier Thanks for checking us out! 1AAuto.com
Thank you, thank you, thank you!!!! I will go to you for any future car needs first. Unfortunately, you guys were out of stock on this part. But I'll be sure to go to you guys first for all my future needs.
Great vid! I followed it to a T and no issues. Thanks!
I couldn't have replaced my rear regulators without this video. Thanks so much!
+Scott Mallozzi Glad we could help!
This video was very useful to me!! Thank you for posting this, it is very accurate and informative!
Thanks for watching. We're glad you liked it. 1aauto.com 866-403-3393
Your video was great! I ordered the part from a1auto.com because of how informative your video was. I appreciate what a good job you guys are doing over there. I will definitely be a repeat customer. Thx.
Thank you. Welcome aboard. 1aauto.com 866-403-3393
Thanks. Worked well for me. My glass frame was stuck at the bottom and I could not pull it up to align with the hole in order to drill out the rivet. Luckily, I was able to angle the drill down through the bigger hole on the right. You just need to wear out the rivet and it will eventually give and your window is free!
There's always some kind of snag, isn't there? Sounds like you've got enough experience to work through those kinds of problems. Good work! Thanks for watching the video. 1aauto.com 866-403-3393
Nice job
Thank you for taking the time to post this video i have to do this in a week now i know what to expect. Very imformative.
mbidanis Youâre very welcome! Glad we could help 1aauto.com 866-403-3393
I somehow wound up with the button working backwards. oh well! good enough for a window that probably wont really get used. Thanks!
Awesome video. Thank you so much for taking the time to help people.
No problem. Thank you for watching. 1aauto.com 866-403-3393
Great video! Made my job much easier. Thanks again.
Thank you for your post and all your videos. You are the man đ
thank you so much for this video, i was able to fix the problem with my window.
Thank you. Doing one later today.
Great video!! Got the part from 1A and you showed me how to install it too.
Thank you for watching. Please let us know how the repair comes out!
1aauto.com 888-844-3393
Repair is done. Much easier when you know what to expect. Thank you.
thanks alot guys really helped me on my 2004 ford explorer
+David Blackwell We're glad the video helped you out. Thanks for watching. 1aauto.com 866-403-3393
That's what I am doing this weekend!
Outstanding. Thank you for posting this video.
+Mark Chastain You're welcome! Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com/window-regulator-rear-passenger-side/i/1awrg01710?CZcams&CTA%20Comment&ATony
Can you tell me what kind of adhesive they use for the watershield
excellent video, it really helped me out.
+Regi Licht Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Are these instructions compatible for a 2005 explorer?
Is the process similar for a 2002 ford explorer XLT?
Can the motor be removed individually without taking everything else off too?
Just did this today the top and bottom bolts for the window bracket not the motor started turning the moment I put a socket on it be prepared with a grinder
Great. Thanks, worked perfect.
The bolt for reconnecting the window to the regulator should be included but glad I know to buy bolts incase whatever brand I buy doesn't include them.
Thank you very much for the video! Now I know what I'm getting myself into!!!LOL
Bleed Forme Youâre welcome! Thanks for watching 1aauto.com 866-403-3393
This video is very informative. Had I seen this I would have saved many hours of wasted time!
very helpful! thank you!
After successfully performing this task the window goes down smooth and fast however, when raising the window it hangs up then stops but if you pull forward and up it will go up. Is there an adjustment somewhere I didn't do? Thank you
+66lwmorgan This is most likely due to the window guide needing some maintenance. For full-frame windows, the left and right side of the window frame act as guides for the glass. Spray silicone lube into the guides, and raise and lower the window a few times.
@@1AAuto Thank you very much, I'll give it a try and I appreciate you getting back with me.
Great video. Thank you.
+Mike Wilson Thanks for watching. Have a great day! 1aauto.com
You guys a awesome great videosđ
+Fernando Rodriguez Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@@1AAuto your welcome Thanks
My RH rear window was stuck on up position too. I drilled a hole the same size and on the right spot where the rivet is, problem solved.
THANKS
+Steve Howell Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
If the regulator had been replaced by a dealer before would they have re-riveted the window or most likely have used a nut and bolt?
+sewing1243 It could have either but usually a nut and bolt. Thanks for watching!
Following along perfectly, but I've gotten to the point where I need to drill through the rivet, however, the window is stuck in the up position. Cable is not jammed or obstructed at all. Honestly, I think the window has been "glued" shut by the sun since it's been years since it has been lowered. Any advice on how to free it without causing any damage? Please help, I'm completely stuck right now.
+Riggan Rose Maybe see if the weatherstrip is stuck to it and could be freed up somehow to allow the window to drop down. 1aauto.com
I was able to get it down by just cutting the cable that goes to the top of the regulator
thanks thanks ,,,,
How far do you drill rivet?????? Do you drill all the way thru other side??
I just did this after watching this video but my window only opens half way now. Any suggestions?
How do I remove the rear window on this vehicle? I need to replace it along with the regulator.
Great video and very useful.
However, the problem I have is I believe that the motor is dead. My window is in the "up" position and therefore the rivet is not available in the panel hole for removal. How can I get the rivet out so that I can remove the regulator and replace it..or the motor ??
Any info would be appreciated.
Thanx in advance.
Once the door panel is off you should be able to move the window up and down by hand. If you can't the cable on the window regulator may be jammed on something and preventing it from moving. If this is the case, once you free the cable up you should be able to move the window. Hope this helps you out. 1aauto.com 866-403-3393
I have a 02 explorer and I ordered rear window motors and regulators for it from 1A auto. But, once they're installed, they only go up and not down. What could be the problem??? Thanks
+Robert Coleman This could be an issue with the window switch. I would recommend taking this to a mechanic and having this properly diagnosed. There could also be some damage to wiring somewhere between the motor and the switch causing this to only go one direction.
I don't have a drill. is there another way I can remove the window from the regulator
GREAT VIDEO, what's the size of the bolt u use to attach the window, thanks
+Rodiam Alvarez Thanks for watching, we're glad you appreciated it! In the video, Mike said it was about an m6 size, with probably a 10mm head and a locknut on the back. 1aauto.com?CZcams&CTA%20Comment&ATony 866-403-3393
thanks guys
Is it possible/does it makes sense to replace the motor only? Or must the entire regulator assembly be replaced ? Thanks
+Roger Diaz Thank you for checking us out. It is possible to replace just the motor, but most consumers tend to replace the entire assembly while they are in the door. 1aauto.com
will a mountaineer/explorer window fit in a aviator? the glass and regulator?
+Nick Littlewolf Compare the two and see if they are the exact same size and cut in the same dimensions. We always recommend replacing with exact parts
Whats the length of that M6 bolt.
Do you have a similar video for a 04 tahoe
+erwin lopez Thank you for watching. Unfortunately, we do not have a video for your application. We will keep this in mind for future repairs. www.1AAuto.com?CZcams&CTA%20Comment& 866-403-3393
hey buddy can u help with something.
I got a 2005 Ford Explorer XLT
My cuz been using it he the Trip Odometer From Mph to Km
i have no clue how switch it back to miles.
My Digital Odometer reads Klm on it as i let him use my car Canada
Can u help get it back to normal
i been going to setup but i have no clue past
please help me
+Kris Markaj Thanks for watching! Something like that should be in the owner's manual under "driver controls," but the controls should be in the setup menu.
I did this with an aftermarket regulator (not from 1A Auto) and had a problem with the limit strap slamming against the cable run. Workaround: czcams.com/video/-ROVyvlOcho/video.html
The camera close ups on the removing parts sucks! You'll need a better camera person. Aside from that the video isn't so bad. But I will say you'll need to do that for a Ford Explorer sports Trac. Especially for the 2002. Cause not all removing parts on the panel are the same.
Its so pathetic that Ford riveted this in place. Clearly not thinking about the customer!
thank you so much for this video, i was able to fix the problem with my window.
+John Blonde Thanks for watching. If any of our viewers needs to make this repair, we carry the replacement window regualtor shown in this video on our website. Here's a link to them www.1aauto.com/window-regulator-rear-passenger-side/i/1awrg01710?CZcams&CTA%20Comment&ATony