Testing the Latest Bambu Lab, Qidi, Sovol, Anker, LDO & More
Vložit
- čas přidán 31. 05. 2024
- In this video, I review 8 of the latest and best 3D printers I received recently. Brought to you by PCBWay, your one-stop-shop for PCB prototypes and assemblies. Check them out at jle.vi/pcbway
I don't know if you've noticed, but there are like, a lot of new 3D printers coming out on the market. And despite the fact that I'm literally declining over half of what manufacturers are offering to send me, over the last few months, I've racked up nearly a dozen of these latest, greatest 3D printers.
In this video, I'm gonna try and review them all.
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: / thenextlayer
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
00:25 Background & Disclaimers
02:20 Qidi X-Max 3
06:39 Comgrow T500
10:53 AnkerMake M5C
13:27 LDO Voron 0.2
18:27 Siboor Voron 0.2 CNC
23:10 AnyCubic Kobra 2
25:46 Bambu Lab P1S
29:08 Sovol SV07 Plus
32:48 Conclusion
🔗 LINKS TO SUPPORT THE CHANNEL🔗
👉 Qidi X-Max 3: jle.vi/Qidi
👉 Comgrow T500: jle.vi/comgrow
👉 AnkerMake M5C: jle.vi/ankermake
👉 LDO Voron 0.2: jle.vi/voronkits
👉 Siboor Voron 0.2 CNC: jle.vi/siboor
👉 AnyCubic Kobra 2: jle.vi/anycubic
👉 Bambu Lab P1S: jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
👉 Sovol SV07 Plus: jle.vi/sovol (use code NEXTLAYER to get $10-20 OFF on orders of $259 or more)
👉 Clough42's updated review of the Qidi X-Max 3: • QIDI X-Plus3 Redemptio...
👉 Check out my review video of the AnkerMake M5C: • Testing an "Easy" 3D P...
👉 My review video of the Bambu Lab P1S: • Introducing The Bambu ...
👉 Get the Slice Engineering Mosquito Magnum Hotend here: jle.vi/slice
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: / @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: / thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: kit.co/jlevi
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #bambulab #3dprinter - Věda a technologie
Thanks so much for watching. And liking. And commenting. And subscribing. And shopping using the links in the description. Yeesshhh... I sound so needy, huh?
Here's some love ya needy bastard! 😂
there is no 7 plus yet
what camera and mount did you use. We bought the x max 3 and have had some very concerning issues. So far bl touch dropped the pin and hit the print bending it and failing, they replaced it. then the hardened nozzle/hot end failed. Moved the nozzle to the original hot end and today during a 6 hour CF print it clogged up and was fully jammed. had to replace it with the replacement nozzle. I need a camera to watch the prints as I worry now. So far i have just stuck a camera on the rim of the container pointing into the chamber and it "works" but not ideal at all for full coverage feed.
I greatly appreciated the shutout to Aurora Tech! I enjoy her stoic style.
Yeah, she's very thorough, love that.
As a consumer, one of the trickiest things to do when comparing different products is correct for the enthusiasims and styles of different reviewers. It's extremely natural for a person to find one reviewer more appealing than another simply because of the way the reviewers structure their videos and present their information, with the result that often a consumer ends up picking one product over another not because the product is a better match for their needs but because the presenter is more appealing to their tastes.
Which means I, personally, appreciate it when reviewers are able to compare several similar products, because while I still have to account for the differences between your preferences and mine, it's the same "correction factor" on every product. So I hope this video does well enough that you end up doing more in this vein in the future!
I definitely will! People seem to be loving it
I think the idea for a video on large 3d prints is a great idea and something I'd love to see! Large 3d prints have always caught my eye :)
I love that you stood up to your sponsor (anycubic) and were honest with both them and us 👏
Thanks! I love that they were like “yeah, cool, we understand and respect that, and also, wanna fly to China to talk to our engineers about it next week? We will cover your airfare” lol!
These overview videos are really helpful, thanks a lot! Keep up the good work 💪🏻
I have the QIDI PLUS3 and the heated chamber is very useful. pc PA CF or GF filament prints without warping, whereas other enclosed printers can have problems with warping when printing some large objects. You can recover the Klipper via SSH but it may not be easy so they send you a new emmc.
Like the comparison format and also the single machine reviews. Yes to the large format printer episode, I have a Modix and there are very few channels that cover 600×600 or bigger printers. It would be nice to have a printing tips and troubleshooting episode for these large format machines.
I like this format; nice introduction into what is out there for those of us that aren’t completely “plugged in” to what are the newest printers coming out and in a decent time frame per printer; definitely support more of these!
Nice. Will do more in the future.
Yes please on large format printers. 🙏🏾
Love this type of honest quick review comparison. There are so many in-depth videos out there. It’s nice to get this style so we can see the spectrum and even be able to recommend something to a friend if they are looking for something different than myself.
Glad! I’ll do more then.
Love the reviews! Thanks Jonathan for all the loads of hards work!!
My pleasure!
I love this format! Well done my friend!
Would appreciate a top large size 3d printers comparison. Roughly 400*400*400 build volume and not bedslingers because they take up to much space to fit in a closed or on a table.
Thank you for the line up review. I like seeing all the new printers in this type format.
Then I’ll keep doing them
another great video, loving 3d printing now, so much choice out there, from when i started with my Anet A8, keep up the great work
Thanks, will do!
This was another great video, thank you. I, for one, would love the large format video you teased. I am still enjoying my Creality CR-10 that I have owned since 2017. It has been heavily modified and prints reliably and with good quality. I bought a Prusa MK3s kit and enjoyed building it but the print quality leap I thought it would provide was not much at all. I guess I’ve got my CR-10 dialed in to well! I since sold the Prusa and need to see what you recommend for my 310mm x 310 mm build surface.
Great to see an honest review love watching your vids
I appreciate that!
Great video! Already highly appreciated for all nice suggestions!
Awesome, thank you! You guys are always so great about implementing community feedback, which is one of the reasons your kit is so advanced!
Ive had my ankermake M5 since kickstarter days so of course i had to get the M5C, and i gotta say the stuff ankermake has learned from the M5 to the M5C is insane. The M5C is seriously in consideration for replacing my small print farm currently, it just works so well i think it goes beyond even just beginner stuff. For the price that it is its wild i havent seen it take off even more. Bambu P1S is REALLY nice but its a significant bit more expensive then the M5C and IMO not worth unless you need it specifically for AMS or the enclosure
Thanks for sharing!
Love this full comparison of the printers. Do this more often please
Very poor comparison
You got it
Excellent analysis - such a detailed review. Bravo!
Thank you kindly!
I’ve built a Siboor V0.2 CNC kit and a Voron V0.1 (V0.2 S1 in progress) and I agree with your reviews of them. There are better toolhead options besides the stealthburner, I think that would improve them a lot. Considering I print ABS/ASA mainly it doesn’t need much part cooling. The LDO kit also doesn’t come with the lcd controller which is another $30. The LDO kit comes with a hiwin X rail which is better quality.
I agree with you though that the voron v0.2 build isn’t for the feint of heart. But once it’s tuned it’s like beast of a printer.
Excellent Video! It gives a great overview of your expirience with all the different printers. Personally I only own larger printers doing large funktional prints:
2 Ratrig VCORE 3 500X500X500 fully enclosed, an Ender 5Plus heavy modified and klipperized and since 2 weeks ago a Qidi X-MAX 3. The purpous of the X-MAX 3 will be to print GF and CF material only becaus I'm lazy and don't want to change nozzels and filaments on my Ratrigs all the time.
Thanks for sharing!
The Qidi looks really promising! Thank you for the review
I just wanted to point out that for the P1S is $15 to get the hardened steel hot End/nozzle and $20 for the hardened steel extruder gears on the website.
Great breakdown and comparison. Thanks
Thanks for watching!
Huge fan of the comparison videos. Only drawback is that you have to have a good system in place for getting rid of the old (actually new) printers that the manufacturers send over. LTT has a whole department around liquidating what they don't store. A lot of other 3d printing youtubers seem to accumulate a lot in no time. Great content as always!
LTT even liquidates things that don't belong to them after testing wrongly and shitting on it XD
🤣🤣🤣 Completely forgot about that for a second lol!
@@Argosh oh you mean the billet labs water block that was originally intended for LTT to keep? The one that they are now blowing out of proportion claiming it is their best prototype and they need it for ongoing development yet they sent it to another continent for LTT to review and keep?
Good morning, in your opinion, what is the best 3D printer, with an approximate area of 300x300x300mm and that prints ABS and ASA filaments?
Thanks
The only reason, why I bought a printer with 300x300 mm bed, was to be able to print bigger prints and not limit myself! So, please, come with that big prints video!
Will do. Stay subbed!
This is a very nice format, with combined reviews / verdicts on all tested printers. While I do understand that it would take way too much time make a full review of all printers you receive for review, then the format would be great to include on the channel full reviews of the best of the printers. :) Not saying you did not already do something like this, but use commenting on how the format could be going forward. Thanks for another good video. :)
given they have hardened steel nozzle hotends and hardened steel extruder gears available from bambu, does the p1s still have issues with abrasive filaments if you upgrade those. i know that is not something for the novice necessarily but i've built my own voron without issue before this seems a reasonable and cheap upgrade if it lets me get better experience with abrasives
top big volume prints is a great idea, 300x300 printers are becoming common even at the budget end
got myself one this spring and I've already printed a few things that wouldn't fit on 230x230, but never came close to the full build volume, I'd like to test that
not interested to print buckets, though
One comment to the Voron 0.2. There is the FANTASTIC Dragonburner Toolhead. It uses 4010 Blowers instead of 3010 Blowers and has MASSIVE Amounts of Cooling compared to the stock one. All you need are two 4010 Fans. For the extruder I would use the Mini Sherpa, as It works with the stock internals and is lighter.
Nice i will check it out because damn the cooling sucks on this one.
Really informative thank you !
Glad it was helpful!
great comparison! just a quick question. did you find the cnc'd a and b stepper housings a bit too beefy? my toolhead hits that if i move the gantry all the way back
Works fine for me…
awesome review, ive had my ankermake M5C since it released, and while i agree its extremely user friendly more so than any ender prusa or bambu printer ive been hands on with, i believe you can actually grow with this printer! you may not be able to swap firmware, but with its all metal hotend you can move to advanced materials, even engineering grade which no beginner should touch IMO. But when they learn what the slicer settings do and all the ins and outs of 3d printing the absolutely can grow with the printer. The most recent updates also added in precision modes which so far with what ive printer works fairly well. It allows you to do 0.05mm layer heights and actually seems to work pretty well for miniatures as well as a FDM printer can anyways. Plus, ankermake is very intune with their community and seem to be interested in making upgrades and accessories for the printer, so who knows whats to come later! theyve already discussed making a screen for the M5C and have mentioned possibly doing a camera. also to your point about locked down slicers, the ankermake printer does not require you to use the ankermake slicer, it only requires that if you want to send wirelessly but since you can load gcode into the slicer you dont even have to slice there you can slice in any slicer you want then load the gcode to send it wirelessly.
Without it being enclosed, though, nylons and PC and even ABS are a no go
@@thenextlayer yea, its a poor argument to say you can just buy an enclosure to put over it since the other ones come with a built in one, but its the one ill make haha, For the price it is and how cheap you can get enclosures i think its perfectly fine to grow with. It would be epic though if ankermake made an official enclosure for it though!
I appreciate the comparison videos, thank you. I have an SV01 pro and SV06 pro. I don’t need a new printer but I really want one. I’m intrigued by the P1p and the P1S, but tempted by the sv07
Aurora Tech is awesome. So much care and detail, it's like you experienced using the printer yourself.
wish more channels did that more than just two printers. great vid!
I’m looking at the Elegoo 4 pro. What are your thoughts on it? I really appreciate your time and thoughts. Love your channel. Myself just getting into 3d printing.
I wonder if its possible to upgrade the Bambu X1 Carbon to print PEAK and other higher temperature (400 deg C) filaments?
On Amazon & Aliexpress there are lots of replacement hotends saying they support 500 deg C for the Bambu p1S/X1C.. but i can't see any youtube videos confirming.
Despite the few issues, your impressions of the Qidi X-Max 3 have me appreciating Qidi that much more. I was already impressed with the company thanks to a few other reviews, though that whole "brick your machine if you update it thing" is properly bizarre. Despite that, they seem like a better alternative to Bambu Lab for people worried about Bambu's explicitly bad ToS and data security.
Bingo! I was impressed too.
Nice roundup. The only thing I'd add is that any printer that lets you control it over USB (like the Kobra 2) can have networking added for about $20 with an SBC and OctoPrint. I use a bunch of Orange Pi Zero boards currently since the Raspberry Pis are still harder to come by currently. The new Orange Pi Zero 3 is really nice for as little as $15. Loving the P1S also (and upgraded my P1P with the P1S kit on Monday).
That is true but also unnecessary today when most printers ship ready to connect
The p1 series extruder gears and hotends are exactly the same as the x1, only in stainless steel. You can easily swap both of them out for hardened steel and have no issues at all with abrasives.
I like this kind of review - there's soooooo many near-clones that just quickshotting them is more than they deserve review-wise.
Now there's some standouts and firsts here and there which should be given more airtime - some of Sovol's recent products & Bambu Labs spring to mind here but these are few and far between. Yet another bedslinger from Prusa is yawn time, but the XL toolhead is very interesting from an engineering standpoint.
They definitely all need to be rated on the "can my mum print with them?" scale.
Whats kinda sad, by the time some of us can save up to buy something like the x1c or x-max-3, a newer better printer comes out with better/more features and a bigger bed. Worst part, it always happens *right* after you blow that money on the older printer you've had in your wishlist for months.
Love these types of videos, especially for someone who is looking into getting into 3D printing. Also, I would like to see you compare bigger 3D printers.
On it!
Great format
Loved the video - period - full stop!!!
Yes I would love to see you do the TOP 'large' printers.
Will do!!
I’m really tempted by the Qidi X-Max 3, but know I’ll be super annoyed if Bambu Labs releases an XL version. How likely do you think this will be in the near future?
Not a huge problem waiting for a few months as I’ve got zero spare cash 😂
The Bambu cloud and privacy issues have really turned me off from them. They are great printers but...for me that leaves the Qidi X-Max 3 and Plus 3 and Creality K1 and K1 Max.
@@raymondsmith4747 agreed! I was always a bit wary of their cloud first approach, and the recent shenanigans haven’t helped!
@@raymondsmith4747 What big privacy issues are turn-off in regards of BambuLab? And what are the great better solution out there? Seems to me cloud in general have privacy issues. Yet to see anything happen to users of the bambu cloud!
@@raymondsmith4747 I love my Qidi X-Max 3. Best printer to date for me! After Creality printers in the past I am glad I went with the Qidi
@@raymondsmith4747 Why would you use the cloud with it when you don't have to if you don't want to? It's an either or kind of thing, not sure what you're going on about. It prints better than the creality and has better support than the quidi.
I wish you could buy the bigger screen as an add on for the p1s, but its not that big of a deal. I dont really use the screen that much anyway. It was my first printer, and i love it.
Thank You for this video. Did I like the format: Yes, Often times I scroll to the end to listen to the summary. Do I want to see a comparison of the SV07 Plus and its competitors: Yes, The Ender 3 V3 Plus, Neptune 4 Plus and Kobra 2 Plus for example.
Thank you for the video . I would appreciate a video on comparing all the new larger format 300cmx300cm bed printers either bed stingers or xy. I am in the market for a large printer for items for work and I have been looking for a year and they keep evolving but I do need to make a decision. I was all set to get the K1 max but now sovol 7plus come and well the eleego max is larger which might help for future designs so a video like this for the bugs guys starting as far back as the artillery sidewinder might be useful. Thank you for a good video. I learned about printers that I haven't even heard of too!
I’m on it!!
Thanks for the vid. Good info but you should have also given prices for them. I'm in the market for a new machine currently and am thinking the Bambu Carbon X1 with AMS. It's a bit expensive and not perfect but certainly seems more capable than most others. I've been using an Ender 5 for the past 3 years and I learned a lot about the process with that printer (still works well today). But I'm looking for an enclosed printer that can use more specialized engineering grade filaments and definitely want to up the speed. What have your experiences been with the X1 w/AMS? You seem to like the P1S but that display is miserable and I'd rather have a full temp build plate, the higher end camera and the hardened steel hot end & gearing. Do you have any reservations about the X1? Thanks for any info you can share.
If you’ve got the money and don’t mind spending it the X1C combo is the best printer money can buy now hands down. If you want to save a bit, go P1S. You sound like you want only the best though. So get the Bambu. Kindly use my link as it helps support the channel? Https://jle.vi/bambu
I don't have an Xmax3, but the plastic makes sense considering it costs less than the much smaller X1C printer.
Big thanks for this. What machine is recommended for small object PLA print quality prioritised above everything else? budget $500.
Wait till September 20th
👍👍@@thenextlayer
I've been waiting on the SV07 Plus. I'm still waiting on the Elegoo Neptune 4 Pro Plus. The extra speed of the core XY machines does me no good because most of my parts are TPU that can't be printed quickly anyway. I wanted Klipper for improved print quality and the new high speed printers have much better cooling which will help with overhangs.
I loved the 3D printer inside the 3D printer at 3:07. It is a three-ducken!
Not sure why you didn't include Creality K1 and K1-max. For me the decision is between the Bambu printers, Qidi's new printers (x-max 3 x-plus 3), and the Creality K1's.
K1 is quite old news and I did a full review on it. K1M is out of stock, I’ll get it next month
@@thenextlayer I didn't realize a printer released a month or two ago made it old news. I was interested in comparing the new(er) higher speed printers which I certainly think would include the K1's. I look forward to your K1 Max review. In your K1 review it's not clear if you had the "fixed" extruder or not. You said your replace it and it was better...Nathan that you referenced did a comparison of the old and the new "fixed" extruders. If you had the old one then I would discount the extruder related issues which I think you kind of did...
Thanks for the video. For the LDO kits, I feel while it’s documented, the organization and bouncing between manuals is cumbersome and fraustrating. Built a ldo trident and v0.2, in comparison the Salad Fork documentation was straight forward.
Great vid, I am looking at a new printer as my current ender 3 s1 is starting to become unreliable and have issues with vertical prints. How does the sovol 7 plus compare to the 7? Also which would be your pick between the Bambu ps1 or the qidi max 3 ?
SV07Plus is fantastic, just like the SV07 but bigger honestly. I would choose the Bambu P1S personally, but if you need a big build volume, the Qidi is great too
@@thenextlayer thanks for the reply and advice, just really want a printer that is bigger and that just prints well. Also looking at some that will handle the other filaments as well.
Thanks for the vid! I'm going round and round in circles trying to decide on my next printer. There are almost too many choices these days lol. I need something bigger than my Prusa mini, I agree with you on the mk4 value, the XL may be available when my grandchildren pick up the hobby, and its not even enclosed. So I think I'm gonna grab a 7 Plus for now and maybe some day Prusa will give us an enclosed 350 corexy. I can dream.
… why not just get a Bambu like literally everyone else?
I have trust issues. lol@@thenextlayer
I would enjoy a large format printer video. Currently enjoying my Sidewinder X2 but am looking to upgrade
Great to see a mini review of the SV07 Plus even though it's not officially launched yet. 🤫 I am a bit disappointed that it is only a bigger SV07 with not many improvements like what Creality did with the K1 Max. They fixed problems on the K1 on it. Actually in terms of upgrades, I was hoping the look of the SV07 Plus would be like a bigger Ender 3 V3 SE - linear rails (like the SV06 Plus) on the bed especially with a bigger build plate. As for me, I've mentioned I'm still deciding between a P1S Combo or K1 Max for my 1st and only printer. I want a bigger volume for costumes, but I also want an AMS for printing toys and fun stuff for family and friends. I can't spend more than $1000 for a printer.
If you want an AMS, you’ll need a Bambu printer - or to build a Voron and ERCF which is NOT for beginners. Sounds like P1S is the option for you. You’ll do fine without a huge printer probably. People overestimate their needs. Also Bambu doesn’t have a big printer coming out any time soon - at least not for many months. If you end up buying Bambu, jle.vi/bambu would help me out, and jle.vi/creality if you buy creality
@@thenextlayer Thanks for the reply! For sure I'm keeping away from the Vorons. 😅As I mentioned, one reason I want a bigger volume is to print helmets but I can always cut them up. I really appreciate when I get replies from makers. Makes me think about my options. One CZcamsr suggested to get the K1 Max so at least I have the volume, as there may be an AMS-like machine in the future that will be compatible to the K1 printers. Still have months away to buy my 1st printer as it will be my 50th bday gift to myself. 🥳👨🦳 Gives me time to save up too! Hopefully some company comes up with an affordable large, multicolor printer when it's time for me to buy one. 😅🤞
Bring on those large prints! I have the SV06 Plus and the SV07 Plus (yes, as beta tester)
Seeing 4 Engineers via zoom call on that AnkerMake = dramatically improved my view of AnkerMake.
Same.
2 months x max 3 owner here: I like it, it's got it where it counts. Motors get hot af tho, so might not last as long as id like... Also QIDI doesn't do PETG, so there is no PETG profile... The generic one supplied is ... strange ...
Print quality is pretty good tho, speed is amazing. You really need a solid desk or shelf to put it on.
If you prefer the SV06 linear rails you can just choose the upgrades when you buy it and you'll have an SV07 without rollers.
Super useful video. One suggestion: since you mentioned that you disassemble the spool holders to be able to position the printers in racks, could you please specify the _minimum_ Width x Depth x Height dimensions required to operate each printer? Nobody seems to specify these. Cheers!
That's a great idea! I’ll try to do in the future.
I was looking for the Elegoo Neptune 4 pro
i love how the qidi looks like a computercase from the 2000's casemodding scene
Can you please share your Qidi Xmax 3 Settings/profiles? I have one and I admire your prints.
Stock OrcaSlicer profile!
Interesting format. Good to see a simple comparison. Still unsure between K1 max from Creality and Qidi Tech X-Max 3 tho.
I’ll test K1M soon and do a showdown on large printers
Very much looking forward to that. :) @@thenextlayer
If you had a choice to buy, X1C or the P1S, which would you get??? I'm between a noobie & intermediate with printers running marlin f/w with cura.
I even upgraded my son's geetech A20M. At my age now, I just want to take it out of the box and make whatever with whenever I want, like toys for grandkids or structural stuff...
If you have the budget, the X1C is the printer to beat. If you want to save a little, the P1S is also phenomenal. I would rather have a P1S combo than just an X1C. Either way, I'd love if you used my link :) jle.vi/bambu
The SV07 and SV07 Plus look great, but the SV06 and SV06 Plus still seem to have better feature sets except for running Marlin instead of Klipper. I'm still leaning towards the SV06 Plus the most. Is there any major reason I'm missing to go SV07 Plus instead?
Nope, if you get an SV06 + Sonic Pad, you'll be GOLDEN
@@thenextlayer Thanks man I appreciate it.
Does the SVO7 quality settings also work with the SV07 Plus?
Yes
Definitely want to see a large printer comparison. Just setup and X1C that I love, but want to add a larger printer for oddball jobs, and am struggling to come up with really solid up-to-date comparison info. Subscribed in anticipation.
So far the Qidi XMAX3 is the one to beat. But I’ll test the K1 Max soon too I think
I really don’t like sharing any connection with China just to get prints to my printer. No Bamboo of any sort for me. I’m sticking with the K1 and K1max from Creality.
Bambu released LAN only mode bro. And K1 also has cloud connectivity… but either way I appreciate you using my links ;)
@@thenextlayer that’s great to hear. Ya, I don’t use the Creality mobile app. The other thing that worries me about the bamboo is the carbon fiber rods. There not mechanically made to be a bearing surface and users are finding carbon dust because they are wearing down. It’s epoxy resin and carbon fiber….. the K1 and max use traditional stainless rods, bearings and grease. They will last longer over time. We will see what stays around long term……
Love the comparison format, it makes it easy to know what to expect from the current market.
Been looking to get a larger printer and the SV07 seems like a good pick at a decent price. I’ve been interested in the Kobra max/neptune 3 max but they don’t seem very fast, a big printer comparison would be very helpful.
Kobra 2 series is very fast. But I prefer the Sovol because it’s open source
@@thenextlayer Thanks for the input, I ended up ordering a SV07 plus.
At the time of my first comment I didn't realize there was a plus/max version of the Kobra 2 but on top of not being open source they also lack all-metal hotends. Despite the bigger bed sizes I do not see them as a better value.
4:49 klipper is basically tells you that you have to upgrade MCU, it have nothing to be broken state.
oh I am in for that SV07 plus, looks like the link is not live yet. Wonder when it actually comes out?
August 29 at 11:59am EST - and the first buyers get $180 off!!! Https://jle.vi/sovol and keep the tab open till the 29th ;)
@@thenextlayer The problem when they give the first buyers a discount is that usually only US buyers can get it on that date. For that reason, I will be watching the release of the new Anycubic machines.
A comparison of the large format printers would be awesome!
On it!
Hi there. I received my AnkerMake almost a week ago. There has been 2x firmware updates and a software update that enables full expert level adjustment. Unfortunately, I have had 2x series clogs, with both requiring quite a bit of disassembly. Did I hear correctly that this is a known problem? Should I contact Anker?
I had this issue on mine too. Not sure how many of us there are tho
The problem has been resolved by myself and I processed the data to Ankermake. The infeed shaft at the heatsink was slightly bent. This caused a blockage due to bad retraction. I straightened it and have not had a single clog with printing every day and regularly changing spools
I'm about to order my P1S and I'll use your link :)
Thank you!!!
Nice Vivobarefoot Primus Lite 3’s. I the same pair.
Thanks! I also rock vibrams and xiro Sandles :)
This video is really great, however... I use my M5C daily and I find that even though I'm a seasoned 3D printer its still my favourite machine to use. Also check out the panda touch or x touch P1S mods which allow it to have a great high quality touch screen.
A large 3D printer comparison would be really interesting. I have an X1C but have felt limited by its size. When I decide to grab a second one, I’d either be going for something larger, or a resin printer.
Check out that Qidi man it’s pretty awesome jle.vi/Qidi
Resin is… interesting but extremely messy to the point of being a pain.
Xmax 3 is very tempting esp at that build volume & being enclosed im hoping the phrozen arco is good
I have revised my opinion of it and no longer recommend
@@thenextlayer can you elaborate?
No need to buy x1c, just buy the $20 hardened hit end and the $15 hardened extruder.
Good point
I live in India, so the svo7bis around 400 dollars, and the am cubic is around 150 dollars, so I am confused, which ch one is better
I would definitely like to see a larger printer video, I love having the flexibility of a larger 3d printer, I am looking ot replace my aging CR10 V2 with a newer faster one with as large or larger print size. so yeah, please do a large format printer rundown, that would be great.
Can we get a full review of the QIDI X MAX 3? It seems to have a ton of potential. I’m considering pulling the trigger on one. Would love to hear your take. It seems like a solid printer with a few quirks. I can’t believe bambu doesn’t have a printer this size yet… I’m tired of waiting. Current printer is MK3S+. Prusa missed the mark by not getting a core XY enclosure printer to market.
Don’t buy it. It broke for me and a few other people who’ve reached out to me.
Thanks for the heads up.
Was able to cancel my order before it shipped. 😂 I’ve heard rumors another manufacturer is coming out with an LX soon. Hopefully bambu XL?
The svo7 plus must be very new. I can't even find it on their website.
It'll be out in a few days... stay tuned, and kindly use jle.vi/sovol when you pick one up :)
I would love to hear about the larger printers as I purchased elegoo Neptune max and wondering if I made the right choice
On it
I’ve got a selfish request. I’m strugglin to pick a voron 2.4 kit. I want a fleet of conveyer belt bed 2.4’s to run around the clock.
Siboors cnc functional parts with all hiwin rails kit is quite intriguing to me. But LDO seems to have a lock on good build instructions. And I can’t find a comparison. Ur segment in this video is the closest I’ve found.
A siboor v ldo kit comparison video is what I’m lookin for. :)
Keep up the great work, it’s greatly appreciated…and ur really good it!
To be honest I’d probably go with the siboor right now. The price difference is just so massive. Https://jle.vi/Siboor
@@thenextlayer thanks man, I’m leaning that way.
my x1c's camera is a joke at best if you're talking about smoothness and I've gotten spaghetti several times today and it just kept printing until I noticed and made it stop. I don't understand what everyone keeps talking about the detection because for me, it's absolutely not detecting it.
I'd be curious if you'd do a voron trident, and see what you think about that.
Do you mean SV06 PLUS??? I CANT SEE A 7 PLUS ON THEIR WEBSITE...Great Video and love the format, clear and concise.
Much appreciated!
@@thenextlayer Link does seem to go to the SV07 - do you know when the SV07 PLUS will be released? Thanks!
i didnt know that Bob Sinclar was a 3d printer expert youtuber, well done ! 😃
Ayyy the Vorons finally made the video. I think I agree, if it were me I’d probably buy the Sibor, but I’d be plenty happy with either!
Word! Thanks for all your help. When we hanging out again? I got your charger!!
@@thenextlayer haha yeah I keep meaning to come down to get it. Been having a lot going on the past little while, but we’ll talk!
what about USB cable to computer? that's a feature I want because I don't want wireless