2001 F650GS Plug Change (single plug, Rotax engine)
Vložit
- čas přidán 12. 09. 2024
- This is a video I made on how to change the Spark Plug on a 2001 BMW F650GS with the Rotax engine. If you like it, please give it a like and consider subscribing for more "quality" videos.
You never showed us how you suceeded in getting the old spark plug out.
I think you really had to take off the side panel!.
I remember turning it very slowly with the tool BMW included for plug removal. I'm also like 90% sure the panel was still on.
hi,
look up the start up procedure for starting f650gs.
Turn ignition on.
gear in neutral
Wait till temp light goes of
push start button
DONT TURN THE THROTTLE
when motor runs, keep pressing start button for 5 sec.
or 10 sec to dump memory of onboard computer
succes
Is this the same procedure for bmw f650st/funduro?
Damn dude , did you change this in the darkest alley in town?
Nope, poorly lit garage.
What size socket spanner do you need ?
not sure to be honest, this bike is long gone.
Hi can you show me how to change the regulator
This bike is looooong gone lol
Yo prefiero desarmar la moto para sacar la bujía me demoro menos tiempo. Esa herramienta que trae de fabrica es muy difícil de usar
Amigo sabrá cuál es la medida del dado que se necesita para sacar la bujía? El kit que trae de fábrica no lo tengo.. gracias de antemano
you must learn how to start the bike properly ! click down red power switch then turn ignition key on THEN WAIT for all lights on dash to go out apart from the green neutral light wait 2/3 seconds then start the bike . This way the ECU ,CDI UNIT HAS TIME TO KICK IN .
This bike is looong gone. But thanks all the same!