How to install a pop up waste and tap DIY
Vložit
- čas přidán 21. 04. 2024
- Step by step installation of a pop up waste and tap mixer. The is an easy DIY task that anyone can do themselves. I will show you how to install a new mixer tap and also a pop up basin / vanity drain waste plug. For more DIY and how to videos LIKE COMMENT and SUBSCRIBE.
Amazon product links U.S:
Tube spanners - amzn.to/3QfPZii
Pop up Waste - amzn.to/3Usnhgu
Caulking gun - amzn.to/3w9w8u4
Amazon product links Australia:
Tube spanners - amzn.to/3JvW6Lm
Pop up Waste - amzn.to/3vZnRcj
Caulking gun - amzn.to/4dajRqe
Your donations help me to keep helping you .....
www.paypal.com/donate?hosted_...
#DIY #howto #billshowto - Jak na to + styl
Great video. Loved the instructions being thrown in the trash as item 1 on the checklist.
It’s easy connecting the fixing kit when the basin is on the workbench but harder doing it from underneath when you’re replacing a mixer tap. It would have been a good opportunity to show folks how to assemble the fixing kit on the tap then drop it through from the top. The fixings are crescent shaped for that very purpose.
Did this a couple of weeks ago felt guilty using so much silicon instead of the useless orings. Now I feel better about it, thanks again bud 🤣
Tube spanners! That's what I needed! Installed a tap myself and even though I'm small it was so tricky getting my hand to where I needed to be. Vowed to just pay a plumber next time but I'll definitely put that on hold until I try tube spanners
Off to buy tube spanners!
Thanks Bill, I prefer to use plumber puff instead of silicon and also I am ending use this pop up waste got the one call universal 40mm pop up plug waste, you can tight from inside with screwdriver instead of traditional lock nut . Also I like the way you throw the rubber seal away same as me :)
Literally doing this tomorrow! Great timing thx for all your helpful videos 👍
Great video Bill! Can you please do a video on how you would then connect the basin to the trap?
Plumbers puddy so much easier for the drain. Cleaner and no need to apply to the underside if applied correctly.
Thank you Bill.
Mate great video!
Good one Bill 👍👍
👍👍👍
Buddy can you make a video how to replace a rang hood or a hot water tank
Did this same job recently but find the plug often gets stuck closed and won’t pop-up. Have you had this issue or any tips on what I can do? Looks like the same plug as yours from Hammerbarn.
If the pop up waste is not installed exactly centered it will cause the plug to become stuck👍
I did the same a year ago with silicon and now I have black mould around pop on a top. Literally it’s impossible to remove the good quality silicon or it takes a heavy effort to remove it, instead I use a plumber putty that what that purpose for.
👍🏽👍🏽👍🏽
👍👍
where do you live Bill?