Replace The End on a Hose - It's simple
Vložit
- čas přidán 28. 08. 2021
- Visit your local hardware store to get the hose end kit. We use the brass ones. This will take about 5 minutes to replace. Cut the bad end off and wet the end you are going to stick into the hose. Tighten evenly by rotating between the screws. It's that simple. Install the hose and test it with some water. Tighten if necessary. Thanks for watching! #shorts #vertical
Thanks for the info Kevin!!!
You bet!
Probably alot better then spending 30.00 ty
Razerburn421, It seemed like a silly video to do but, I use these hose ends all the time. Sometimes the old hoses get hard but I can use short sections for small projects and save a buck. Thanks for watching! And leaving a comment! Kevin
What is all that noise in the background?
It's rain! Something that evaded this farm for the better part of the summer! All that changes this week. Yeah! Thanks for watching! K
Try repairing a g- hose.
What is an a g hose? Do they last longer than the hose I have? Thanks Kevin