Aye man I know a plumber that started his own business and just JUST does water heaters he streamlined his business and specialty and makes STOOPID change.
😂😂LMFAOA😂😂 Your RI is fine but an OATY POS drain? I'd be VERY suspicious of any "Tile Company" that thinks that is a good solution today😂😂. Furthermore how did you have the slightest clue what the elevation of that drain had to be? I want a 6" stub above the floor an *I* will cut it once I know what kind of pan I need to build and have it laid out. No way in hell do I want the plumber gluing in a drain fitting that is probably at the wrong elevation
It’s called an adjustable shower drain that you can unthread or thread in to match up with finish floor, anybody who has been plumbing for a little while can tell that.
I once spent over 4 hours trying to chip away 60+ year old concrete! I literally had to pulverized it to enlarge the hole! And i was using a actual corded jackhammer!
What’s something like this cost? I got a quote for $4k just to move the drain on a rough plumbed unfinished bathroom. Seemed high for just drilling concrete and moving a preexisting drain.
@@SAADISLAM-el6tgwe have some customers like that, we like most of em, because we give em what they want, send a bill, and they pay. (The ones we like anyway 😂) I'm a sparky but I assume it can apply to other trades with similar customers to the ones I'm talking about.
What made me hate remodels was my own house. Got a forclosed home and basically rebuilt it. The gas, electrical, water, drain and sewer, heating, fixtures, kitchen, bathrooms, laundry are all new. Starting on the main bedroom now.
I did a pan liner in my shower under the tile,their great if the installer knows how to do them.Otherwise they will be a knightmare…I get calls from east long island to manhattan to do these because ive never had an issue installing one..
2 things come to mind… I don’t see the financial benefit of turning a full bathroom into a 3/4… And is the conversion to 2” pipe just to fit the shower? Cause if I’m not mistaken 2” pipe works like a 1.5” if you connect it to a 1.5” Not a plumber just trying to understand what’s happenin (;
I used to do plumbing, but we never put a p trap for a shower drain... are there specifics that would necessitate that? because nothing comes to my mind
@@theplumbersplunger I never went far enough to learn all the details surrounding the work, but we never put p traps in the showers, it was always left as an upright before the drain fixture was put on Must have been either the ground crew put a p trap in deep before the foundation was laid, or my crew was jacked up. Hopefully the first because we did entire neighborhoods 😂
I cannot believe anyone would switch a tub to a shower. It makes zero sense. Ove avoided moving to places because they dont have a tub. Just shower in the tub!!!
Maybe they're older and stepping into a tub is becoming more challenging for them. I haven't sat in a tub in maybe 10 years, probably more, and would absolutely replace a tub with a shower if I anticipated living there for several more years (I haven't moved in over 20 years, also my home has a shower in the master bedroom separate from the bathtub).
I’ve been doing bathroom remodels for over 30 years and never had a client ask me to replace a shower with a bathtub but I’ve taken out countless bathtubs to convert to walk in showers. You might prefer a tub but a VAST majority of homeowners don’t.
@@onyxnoodlewow thats wild. I'm def in a minority if you've done this for 30 years. I would die without a tub. When my muscles ache a lot after exercising or just because, epsom balt baths help immensely so I cant imagine not having that.
@@michaelmcgee2026dial the attitude back down from 11, dude. i was just sharing my opinion and perspective. its perfectly OK for others (and i can see now its many others) to not want tubs, I just hadnt encountered that IRL so im shocked lol
Why aren’t you saw cutting first. Same kind of work as not having an access panel for those mechanical fittings. As well as not soldering. This looks like lazy man work. Is it legal? Yes Is it professional? Nope
@theplumbersplunger The few things I gathered from his comment are that you didn't use a circular saw for your cut out on the concrete for a cleaner cut. I guess he wants an access panel on the other side of the wall, and wants purple primer on the glue joints. From there on it seems like jiberrish but. I guess he's calling you unprofessional for not sodering something. What that something is, I dont know. 🤷♂️😂
Biggest blunder is when my parents removed the tub and put a shower in …. In a one bath house u need a tub. When I purchased the house…. First thing i did. Install a spa tub. Kohler makes. Custom to color. Drain position and length. Best investment i made ….
I do this 3 times a month, and you did it just like I do,I hate remodels but they are 75 percent of my workload and service is the rest.
what would an estimate for a similar job be? just round about?
By God you can do something besides changing a boiler drain and shut off valve 😁
Sometimes
😂
Aye man I know a plumber that started his own business and just JUST does water heaters he streamlined his business and specialty and makes STOOPID change.
@@lilcreaper007just doing water heaters would be a good a way to make a living as it gets
Sounds like a hater
Wonderful awesome work. I watch and learn from you.
29 years in plumbing. Great job !!
Goes so much faster and neater if you score out the concrete with a circular saw first.
NICE WORK ALL AROUND
I think you did awesome job my brother 😊
Very nice work brother!
I like that cleaner, glue caddy
These are always fun!
😂😂LMFAOA😂😂 Your RI is fine but an OATY POS drain? I'd be VERY suspicious of any "Tile Company" that thinks that is a good solution today😂😂. Furthermore how did you have the slightest clue what the elevation of that drain had to be? I want a 6" stub above the floor an *I* will cut it once I know what kind of pan I need to build and have it laid out. No way in hell do I want the plumber gluing in a drain fitting that is probably at the wrong elevation
It’s called an adjustable shower drain that you can unthread or thread in to match up with finish floor, anybody who has been plumbing for a little while can tell that.
Weird how shower drain code is different everywhere
Just did something similar last week. Crawl spaces for the win tho. Jackhammering is for the birds lol
I once spent over 4 hours trying to chip away 60+ year old concrete! I literally had to pulverized it to enlarge the hole! And i was using a actual corded jackhammer!
What’s something like this cost? I got a quote for $4k just to move the drain on a rough plumbed unfinished bathroom. Seemed high for just drilling concrete and moving a preexisting drain.
Then do it yourself
That's how it's done.... You don't like Remodles? That's where the real tradesmen are. They're not on new construction, that's for sure.
What code states you need a hammer arrestors on a shower ? IPC and UPC allow for 1.5in drains on showers as well FYI
First thing i thought too
Idk some customers want weird specifics too
@@SAADISLAM-el6tg super fair. If they wanna pay it's their money I suppose
@@SAADISLAM-el6tgwe have some customers like that, we like most of em, because we give em what they want, send a bill, and they pay. (The ones we like anyway 😂)
I'm a sparky but I assume it can apply to other trades with similar customers to the ones I'm talking about.
Remodel are the best ..cha ching ..3500.00 per fixture
I need to do this
Venting must be within 3 ft from drain. I don't see one. Need access to Hammer arrestors . They break too. Overall clean job
Passes inspection/code here without access panel. The vent was off the toilet so it was within three feet (barely). Appreciate it 🤘🏼
5’ for 2”
Never had to replace. Pipe made hammer arrestor.. 25+ years of remodeling. 😂😂
I like using the laser to line up the c/l of the drain. How did you determine the elevation without the shower pan handy?
What made me hate remodels was my own house. Got a forclosed home and basically rebuilt it. The gas, electrical, water, drain and sewer, heating, fixtures, kitchen, bathrooms, laundry are all new. Starting on the main bedroom now.
How much did you charge for this work..?
Thanks... .good work.
Why would you move the trap further away from the vent?? Shower drains can be on the right or left as well.
It's obviously a preference, and the customer wanted it in the middle
Nice!! Waa this a side job?
You need hammer arrestors on the shower valve in your area?
In some places we do. In others we don’t 😂
If you have them on other parts of the house it's best to just put them in ..😂😂
So who’s coming to verify that pipes are 2” , a mean if it’s 1.5” who is actually checking in an inspection that pipe are in code ????
We use abs in Canada lower 48 use pvc
My only problem is the hammer arrestors
This is my bread and butter right here
what would an estimate for a similar job be? just round about?
What Lazer are you Using
At least you poured concrete.
There's barely any rebar in that slab
Wait so not all the pipes have to be 2” just the part by the drain ?
Can you possibly give your take on why you don’t like doing remodels?
Where did you get the glue caddy? I usually use wire hangers with duck tape.
Easy Money. Plumb on brother
You still have a one and a half inch drain it Hass to be taken back to the stack, yes it will work but no not code
Good luck with that
I did a pan liner in my shower under the tile,their great if the installer knows how to do them.Otherwise they will be a knightmare…I get calls from east long island to manhattan to do these because ive never had an issue installing one..
Can i put a garbage disposal in shower drain?
I think the custom shower pan could use the same drain 🤔
Where did you get that glue holder
He knows real plumbing 🪠
Man youre lucky they ran a 2" trap arm for a tub. That never happens.
1-1/2” isn’t ideal, but its a shower, not like you were emptying a bathtub.
@MisterTwister88
Say u got for women/ girls washing there hair every day. You'll be snaking it ever 6 months.
@@user-er7yr9iy2h Doubtful
@@user-er7yr9iy2hthose Tub Shrooms work magic if you have multiple girls in your house
Where does it say showers need to be 2 in
Looks like a negative fall to get under the rebar.
If so, major fail!
Why is the drain size on a tub different from a shower?
Are you just replacing the tub with a 32x 60 shower?
Pretty much. But the customer is having it all tiled
2 things come to mind…
I don’t see the financial benefit of turning a full bathroom into a 3/4…
And is the conversion to 2” pipe just to fit the shower? Cause if I’m not mistaken 2” pipe works like a 1.5” if you connect it to a 1.5”
Not a plumber just trying to understand what’s happenin (;
That looked like inch and half diameter pvc pipe you installed. Wtf ?
What would be a fair price for this job.
I used to do plumbing, but we never put a p trap for a shower drain... are there specifics that would necessitate that? because nothing comes to my mind
There would have to be a trap somewhere on the shower drain or you would get sewer gases .
@@theplumbersplunger I never went far enough to learn all the details surrounding the work, but we never put p traps in the showers, it was always left as an upright before the drain fixture was put on
Must have been either the ground crew put a p trap in deep before the foundation was laid, or my crew was jacked up. Hopefully the first because we did entire neighborhoods 😂
Ez money
Lucky that you had two inch so close 😮
3k later 😂
In ohio showers can be 1-1/2 drains by code but why not select end drain shower could of saved alot of time and money 🤔
How much did u charge for the whole job? ...
Enough to make a profit
Tub to shower???? NOT AGAIN
Got to love the old work, plumber apparently didn’t own a square or a level
... someone else should have done the digging. Not your job.
Rookie over here talking about he doesn’t like doing remodels when all he’s doing is roughing in a shower like it’s a lot of work or something 😂
Rookie? 😂 ok 👌🏼
Wheres your video brotha man?
@@DaDaDo661I promised your mother I wouldn’t share it with anyone
@@tacklebox6239lol
I cannot believe anyone would switch a tub to a shower. It makes zero sense. Ove avoided moving to places because they dont have a tub. Just shower in the tub!!!
Maybe they're older and stepping into a tub is becoming more challenging for them.
I haven't sat in a tub in maybe 10 years, probably more, and would absolutely replace a tub with a shower if I anticipated living there for several more years (I haven't moved in over 20 years, also my home has a shower in the master bedroom separate from the bathtub).
So to sum up your complaining. It's not what I want so every one else must be wrong
I’ve been doing bathroom remodels for over 30 years and never had a client ask me to replace a shower with a bathtub but I’ve taken out countless bathtubs to convert to walk in showers. You might prefer a tub but a VAST majority of homeowners don’t.
@@onyxnoodlewow thats wild. I'm def in a minority if you've done this for 30 years. I would die without a tub. When my muscles ache a lot after exercising or just because, epsom balt baths help immensely so I cant imagine not having that.
@@michaelmcgee2026dial the attitude back down from 11, dude. i was just sharing my opinion and perspective. its perfectly OK for others (and i can see now its many others) to not want tubs, I just hadnt encountered that IRL so im shocked lol
Promo`SM 😂
Why aren’t you saw cutting first. Same kind of work as not having an access panel for those mechanical fittings. As well as not soldering. This looks like lazy man work. Is it legal? Yes Is it professional? Nope
Keep the video to show you used primer. Like I said, professional, nope
What are you even talking about bud 😂 appreciate the view and engagement. 🫡
This guy 😂🙄
@theplumbersplunger The few things I gathered from his comment are that you didn't use a circular saw for your cut out on the concrete for a cleaner cut. I guess he wants an access panel on the other side of the wall, and wants purple primer on the glue joints. From there on it seems like jiberrish but. I guess he's calling you unprofessional for not sodering something. What that something is, I dont know. 🤷♂️😂
Biggest blunder is when my parents removed the tub and put a shower in …. In a one bath house u need a tub. When I purchased the house…. First thing i did. Install a spa tub. Kohler makes. Custom to color. Drain position and length. Best investment i made ….
So who’s coming to verify that pipes are 2” , a mean if it’s 1.5” who is actually checking in an inspection that pipe are in code ????
How much did you charge for a drain conversion like that?
I live in san antonio and was quoted 3k by one plumber and 7k by another. I ended up getting the job done by an apprentice plumber for 1100$.