[REVIEW] eBay 3D Printed Parts Review
Vložit
- čas přidán 19. 01. 2015
- eBay store: www.ebay.com/sch/custom3dnerf/...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MERCH: a.co/4fdvjwk
INSTAGRAM: / coop772
SECOND CHANNEL: / coop772two
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Zábava
Coop. You should make a SUPER TACTICS RAPIDSTRIKE. Put a shit ton of those extra rails onto it and just put tactical rails everywhere. Then slap on 40 modulus barrel extensions cause you can.
put the green n-strike rail on a rainbow pistol
The mega dart holder can be used for the tri strike
a LOT of reviews lately, hope there's a sweet mod in the coming future.
The retaliator stock is not the worst it is the recon stock is
This items would work well as permanent integrations using JB Weld I think. Sand the stuff down a bit and it would look great.
Bolt the stock on the donkey
Loving the aftermarket parts reviews, keep them coming!
Can you make a video on your editing setup,if you have one or do a tour of your workshop. Great videos Coop, keep em' comin'
I'm sure you could use the the iron sights for integrations and paint jobs. They would look pretty cool
i love your videos coop! keep it up!
The iron sights are soooooo cool ! 😭😭😂😂
i think all of these and the other tac rail accessories are a great idea they just need the capabilty of being tightened with some thumb screws or something easy to remove like a pressure arm similar to what you might see on the front wheel of a bicycle to be able to loosen and detatch it
Pretty cool. Even if they didn't serve a purpose, I think most of those would look cool in an integration.
That bolt on rail will be helpful on the raptorstrike
I would by this kit only for the «plastic» iron sight and the MEGA Dart holder.
Ben_Parker "iron sight' is not referring to the material, it's just a general name.
I see that orange "xd" stryfe there. (ideas are in my head)
That's not an XD stryfe, it's an OJ stryfe
CalemIsDa-Man Genius.
what ideas?
CalemIsDa-Man OJ?
mustardguy Orange Juice.
You should use the green part on nerd rebelle products
Hey coop would you say that bolts are the best and only thing to attach the 3D printed rail with , or do you think that epoxy or glue would work ?
I made a micro rapid strike and hot glued this stock attachment onto it, and it hasn't fallen off after 2 wars. Bolts are always stronger but glue works.
Hey coop ive been watching your videos for a while now and i just wanted to ask if you were done with the awesome rc car with a gun on it
If I remember right, he got enough funding to make the drone.
Coop you said barricade not stockade
he knows
good review man :D
I want to see him attach the stock adaptor to the rapid fire uzi
mr coop did you get a new camera?
COOP!!! You need to bolt the stock piece onto a rotofury!!
exactly
Why does the barrel look so loose?
Time for you to get a 3D printer
Stockade not baracade.
Turn annotations on. The video had the edit in place before it was public.
it the same gun stockade is elite and blue and the baracade is yellow
+cameron hatch Stockade has a bit more powerful flywheels.
no shit
+DerpT145 Actually the barricade has better motors because it uses whistler darts.
I need Mega dart holder
Where's the drone
does anybody know what you need for a pvc gun? im trying to buy parts but i dont know what i need :/
I am too . I got 1/2 inch pvc and cut the pipe to look like a 243 then i wrapped half of the roll and then I bought a jolt replaced the spring ar removal screwed it in and boom .
k gamer 5 its a stockade stock
It’s not barricade, it’s the stockade
Hey coop what kind of cutting wheel do you use for nerf guns?
Well I'm kinda new and I can't find that video does he just use a diamond one?
deadlypumpkins Yeah, he does
I like the retaliator stock 😭😭😭😑
great video!
Correction it's not a barricade it's a stockade to be exact coop
Annotations...
3d printed parts with hot filament are actually very unreliable and the tolerances are very loose, due to the construction of the printing itself. expect having to do some modifications to make them fit to your liking. ABS is more prone to warping than PLA so choose PLA parts if available, altho they a bit less durable.
"Very unreliable" is of course not true. I've had parts that I use regularly for 6 months now with no problems at all. As far as tolerances go, if 0.05mm isn't tight enough for you, then I suggest using a different manufacturing technique.
Avery Colburn 0.05 is the resolution but the parts actually warp due to the heat and lift off the print bed , and so on. a filament printed part will not be mechanically accurate due to these techniques. as I said you can use PLA instead of ABS that warps less and is more eco friendly, but far less durable tan ABS. and tes, half amilimeter in every axis is enough for a n-strike rail piece to fall off or super hard to slide on
morMICRO It's not half of a millimeter (five-tenths), it's five-one hundredths of a millimeter, which is 10 times smaller than that. And a heated bed easily eliminates the warping problem, plus the parts are already PLA so there is nearly no warp.
even if there is a slight warp it all adds up, as you can see some pieces fit perfectly, some fall off, some arre tight, you can see this in the video so don't see the point of arguing
Well sure. But they are not "very unreliable", and I've found Nerf's tolerances on the attachment rails to be worse than some 3D printed parts. Do you have a printer?
I don't see how calling the Stockade stock a Barricade stock is a error. Due to the Stockade is just a Elite Barricade with a Stock.
because the barricade did not come with a stock
Patrick Philippot Actually Depending on what you bought, The N-strike yellow barricade DID come with a stock
Not mine, and it WAS n-strike. However i live in canada so maybe that's why
Actually, it is one value pack
DAMN
Don't you mean stockade
Can I have the “worst” stock (retaliatory)
Retaliator
it's a stockade not a baricade
I love how in all of your videos it sounds like you speeded it up.
Did you?
i think it is. watch his hand motions closely in this vid
I think the best use for the stock holder is for organizing your stocks. It doesen't need to hold it that tight to make it stay and it doesent stay on right anyways
I use a retaleator stock coop772
Well, you're small, or a Hobbit.
+DerpT145 Aka the target age for nerf... -_-
KOKO Gaming Woah, cool
+coop772 can I have your retaliater stocks
If only the sights came in other colors.
All the parts seen here can be made in black, white, red, blue, green, or silver, with more colors on the way.
-the guy that made them
Sir Would you intend on creating an awesome scope from a 3d printer may I ask?
Well if there's interest, I'd create just about anything. Message me with a sketch of a design you'd like to see, and we'll go from there.
Retaliator stock is terrible
Um
Can't you just apocksy puty it into place
Epoxy* putty*
+gamer central me too😣😣😣😣😣
Hey! First Comment. Nice Video Coop, as always.
1:08 this dude just fucked up his audio lmao
I was 21 view lol
Twenny wan
Nononono, the Recon stock is the worst stock in the world.
It's more practical cause it can hold a 6 clip, but it has the downside of being so wobbly. Unless you are putting all your weight on it, it is not going to flex so much it becomes a problem. But it still shouldn't be that wobbly even though it did come out in what, 2007? 2009?
Yes I totally agree.
Myself its weird but raiders too it shakes and its not stability
3rd comment :)
1st