Moza CRP Pedals have some good potential 👌
Vložit
- čas přidán 29. 04. 2023
- Let's take closer look at the Moza CRP pedals set and see if those will be good upgrade for you and your needs!
Simucube 2 Pro Wheel
Heusinkveld Pro Pedals
SimLab 4 monitors stand
Simagic Alpha U
Moza R21-R9
SSRG Porsche Cup wheel Plate
Porsche Cup Wheel Fanatec
GoPro Hero 10 Black
Canon Black Magic Cam
Nikon Z6
Dual PC system Specs
AZZA Ragnarok 801 Dual PC Case
Intel i9 10900k
Nvidia RTX 3090
Intel i9 9900k
Nvidia Quadro RTX 4000
iiyama 32inch1440p 144hz 1mls triple screen Setup
Dell 24 inch Pro on top
Fanatec SQ v1.5 gearbox
Fanatec H-Brake
Hsimracing Cooling system
Mirco Seat RS1
Samson G Track Pro Microphone
Some related CZcams sim channels
@boostedmedia
@Jimmy_Broadbent
@ChrisHaye
@simracinggarage3026
@SimRacingGirl
@Driver61
@driver61simracing10
@WeAreTheRace
@Ermz
@DaveCamYT
@GamerMuscleVideos
@Jaaames
@VirtualRaceExperience
@simracingtonight
@RVRCloset - Hry
From my experience for more than half a year with these pedals I can point out some failures that have arisen throughout their use:
The throttle preload nut hits directly against the pedal body if it is not screwed in enough.
The throttle bearing that joins the damper stem ring to the pedal body is slightly oversized, so the throttle body wobbles worryingly.
The clutch pedal bearing dampers end up coming out of where they should be, generating a bit more pedal travel and overall noise. After all, I'm still happy with them. Their construction is robust, they allow me to adapt with very satisfactory results to the position of my feet and the feeling they transmit is pleasant.
Thanks for the shared experience Armando 🤛
Will pin your post as reference so other people can get some long term use experience 🤛
Have a great weekend mate 🍻
@@chepilevski Thank you for your content. Keep it up!
@@armandodistancia9520 thanks for the support buddy 🤗
@@chepilevski Was wondering if there are any updates you said regarding the elastomer and spring? They still haven’t implemented it which is a bit disappointing. Thank you for the awesome content as always
@@dr.z8378 no buddy, I haven’t heard anything from them about that 😕
Thanks for the tip with the o-rings!!
I honestly have to say I will no longer take advice for sim racing gear if is not from this channel I love your content and your set up is my inspiration to make mine better thank you for your awesome content #RACEBEYONDMATTER ❤
Wow, thanks for the trust buddy 🤗
You should always make good research and collect as many opinions as you can before taking decision as we all can get different experience with certain product !
Thanks for the support man 🍻
Joining the sim racing community, I´ve spent a lot time to review and compare the different vendors and solutions on the market. Thanks for your accurate and informative reviews, much appreciated. I enjoy your videos, style and clear structure of information. Keep on creating such high quality content 🙂
Another great honest unbiased review. Not in my needs but came to support the channel. Congrats to anyone getting new pedals 💯
Much love brother 🤗 always supporting the channel 🍻
Thanks for the tip on the rubber O-rings! I got my CRP pedals back in September and the first thing I noticed was the metal on metal noise when coming off the throttle and clutch. I'm used to it now but I didn't realise there would be such an easy fix (and I've had the pedals apart a few times)
Great review as always! I hope to be able to upgrade my wheelbase and pedals one day and I've been keeping an eye on MOZA via your reviews. I definitely like the R9 and if they make those changes you said on the pedals, they may also be the way to go for me. Thanks as always! 👊
I just started to get into si racing and your channel is amazing , thank you for all your hard work . I will pick up the R9 with the RS V2 and the CPR Pedals . I hope it will all work together and give satisfaction that i am looking for .
If you just start and pick up those, you are starting with something really great buddy!
Those are already high end parts which make me happy to race even having the experience with twice or even more expensive gear😃
You will love it man 💪
@@chepilevski thanks for the reply . I just tunred 60 so i have been saving up for something special .I have been racing with an xbox controller and just fell in love with iRacing. .Eventually i will build a cockpit , but one step at a time . Thanks again and keep up the great content 🙂
Amazing video, amazing presentation!!!
Amazing spaghetti and birthday cake 🍰 🤗
Ciao mi mate
well we missed you several days that you didn't make videos I always follow you with great pleasure
Thanks for the support Ivan 🤗
absolutely good and above all, as always, honest review. I would actually be interested (off topic) which shoes you use. I'm looking for new shoes.
Thnx for great content !) I ve found on my set ( break pedal only ) a small luft ( sideway right and left ) , I suppose it should work like this, or is there a way to tighten it up a bit ?
Great vid! I have one question thoug... What's the size of the o-ring used to dampening the sound of the throttle?
I really like this 💖🔆🤪
I got these about 2 months ago. I just mounted them to my new Next Level F-GT cockpit. I can’t wait to test them out properly
Do you have your pedal plate in gt position or in f1 position? How's the flex on the f-gt? I own an f-gt but worried about cockpit flex. Thanks!
@@Jenglotto I use it in the GT position. No flex at all
@@Beausinklear Appreciate the reply. Thank you. Hope you enjoy your new pedals
@@Jenglotto no problem. I love them
Thanks!
🤛
I have the crp since about 6 months and totally agree. The design is pleasant, good rigidity, but they are a nightmare to change settings. Especially if you don't do it immediately, they don't put grease on the factory, and every thing get stuck, i had to use a hammer. I use red spring and medium elastomer, i think the best combo available but not yet 100% satisfying.
I know what you mean buddy!
I will send them few suggestions and hope they can improve if they listen the experience 🤔
Got into simracing a month ago with a t300. Been binging videos and reddit like a maniac. I love your videos man, very well put together, the information is clear and as objective as possible. Waiting on my Najam Simtech K2X pedals I ordered based on your review. They better be good! 😋
They are definitely good for that price buddy and you can’t get anything better for that money 😁 you will enjoy them and thx for the kind words 🤗 hope you will enjoy the sim world for long time just like I do 😁
I'm a moza fan. Although I am considering the nes asetek prima bundle just because of the pedals
Comparisons (Fanatec, Asetek, etc) - that's what would be useful when there is so much of them available (and good on paper, when reviewed separately).
Judging by yours and others impressions these pedals are very clearly a first attempt with good intentions. Build quality and adjustability wise these seem top notch. It looks like they put a lot of thought into the design but missed the mark slightly in some key areas like brake feel and long term durability. All issues easily ironed out in a V2 set. Sometimes the only way to make a great product is to see how and where a V1 fails in the real world and under real use before fully remediating all those issues with a V2 model. Hopefully they’ll release a V2 model soon as these are really not up to the standard of their high end wheelbases. By the sounds of it the fanatec csl elite v2s are a more competitive option because of the fantastic brake pedal they are known to offer.
That’s the reason I had low expectations as that’s the first heavy duty pedals they built and I was honestly pleasantly surprised even if they are not perfect 😃
Moza are learning a lot from the community and they will nail it in there next model for sure 💪
Thank you for this video! What size oring did you get to dampen the noise?
I put like two 3 very small but not sure exactly what size buddy! They tidily passed trough the head of the bolt!
I use T-LCM with a brake mod at the minute 😮💨 but using an R9 with a GS and CS wheel and definitely need a moza pedal set to finish off 💷💵💶
Appreciate the review bro 🙏
Hope you will get them soon and complete the package buddy 💪
@Race Beyond Matter I will definitely try, but it's getting harder to hide the transactions from the wife 😆 😭
@@steam-SMOKEY 🙈🙈🙈🤣
Since this review is quite recent, I think it's a good idea to wait for the next version of these, like v1.5 or something. It puzzles me how engineering mistakes like these are made sometimes.
Great video! Have you tried the dcsimracing pedals? I would like to hear your opinion compared to these crp. Thanks!
No Dani, I haven’t tested those buddy 🙈
Apparently Will has said you want the hard spring with the medium elastomer
I havent tries this yet but i will co firm
Also where is the motor they seems to propose as the port is free on the electronic box.
Medium rubber and red spring was good combination for me.
Hello what pressure point setting you use on the brake whit that rubber and spring ?
Got the R9 and GS...thought about taking the CRP too...to have all in one software solution but the reviews are mixed..but as Moza seems to react to their costumer ( and reviewer) i might wait half a year and see if they change the problems
They really listen and learn from the community and I’m sure they will come up with upgrades!
Hi Steliyan i follow you and im started configuring my setup with triple and pc ..i start with ps4 😢😢 ..
I tell you not lie,i watched your videos about fov settings and triple monitor settings many many and many time and i set identically number and configuration. .. wow...the result its amazing.. im on a triple 27 2k curved and i modified some setting but eye distance ,screen angle and the rest of settings its like yours ... Thank you mate !!! Greetings from ITALY and go RACE BEYOND MATTER ....
Thanks for sharing your TIPS .. You help a normal people with no experience enjoy an incredible experience simply follow your information...
Much love brother and thank you for that kind post which means the world to me and my motivation 🤗🍻
how would you compare these pedals to fanatics v2’s?
In my country I end up paying double or even more of that price so i can't choose HE sprint or something hence am choosing these pedals because of availability and price. My question is can you notice performance difference between high end vs these pedals ? (in terms of lap times) or can you adapt and still be able to do impressive lap times with these ? (disregarding the feeling and pressure)
PS: am coming off from logitechg29 , just ordered simmagic Alpha U + FX pro + moza CRP pedals. Thank you for you review. You're so great at it brother and so honest and sincere one can hear that in your voice. Thank you bro
also am very new to sim racing but i love it so much.
Hey buddy, if we talk performance wise there is zero difference between any of those high end pedals! Ones you get used to the new pressure which need some learning curve coming from Logitech then they all perform the same lap times wise! I have tested many different and never saw declines or improvement of my laps! The difference between those is mostly feeling and adjustability!
@@chepilevski Hey thank you for taking time out to respond to my question. I seriously appreciate you bro, You're the best
Just to clarify. The red spring and the "hard" rubber for the brake pedal, is the hardest setting you can achieve ? Roughly how many KGs of resistance has this hardest setting got ? And can you adjust brake pedal travel ?
I actually already have the pedals lol
Im building my sim rig part by part and those pedals are the first I bought. They were running out of stock really fast and I really really loved their aesthetic, also heard they're good. Im exceptionally happy to see you've got a good opinion of them !
I haven't used them yet, since my rig isn't built. But when I use them I'll be coming from a set of Logitech g29, so I can't wait to notice the difference in performance
Hey buddy, the Red spring is the hardest and must be up to 40-50kg and the hardest elastomer is probably up to 80-90kg as i really need to push full power to achieve maximum load ! If you are coming from Logitech I can assure you even the stock settings will feel hard for you in the beginning but I would suggest to go straight to the red spring and get used to it for few weeks and train your muscles , it will help you in long term! The travel of the brake can be adjusted from the spring screw adding some preload just as on the throttle but!
The pedals are absolutely great for the price and except of the bit more difficult adjustments from the other expensive solutions, they really can offer everything you will need !
@@chepilevski Perfect answer thank you ! I also see you're big into rallycross, having won some iracing tournaments. Have you tried much rallying before though ? I'd love to see some rallying content with your setup haha
@@coyoterangersmedia5263 I must jump in a car and do some video with the RX 😃
I love RX in iRacing man , it is the best rally car feeling I ever got in Simracing 💪
How would you compare these to the fanatec v3 pedals?
VRS DirectForce Pro Pedal, these or HE Sprints?
What would you choose?
I haven’t tested the VRS but I’ve heard the best thing for them ! Sprints are also awesome!
That being said , they both are more expensive than this ones here !
My gut tells me the VRS are the best from what I saw and heard!
I have a question . I want to start realism on ps5 racing but dont have alot of money to buy top stuff any tips
Hey buddy, the Fanatec have good bundles for PS and Xbox and they are on the affordable side and still direct drive wheels!
Take your time and if you like this Simracing world you will build slowly your space !most of us start with something very simple and build with the time ! Small steps are always sweet in our life journey 💪
Has anyone purchased replacement springs? Can you point me in the right direction...
Hy Which pedal Plate do you use where the Moza pedals are mounted? Please answer. Thank you 🙏
On my cockpit I used my own pedal plate I have on the rig buddy which is from my ImSim pedals set but heavily mounted! And was easier for me to use it instead even if is not too tide for those.
Thx for your Answer Buddy
Off topic: I’m new to iRacing, I tried it and now I love it, aggressive GT3 cars and nice handling and sounding etc…I also get good FPS but when racing AI the cars behind looked very close in the cockpit mirrors like in reality they are far away but on mirrors they look like they are on my bumper… I only see FOV adjustment of virtual mirror not for onboard mirrors… Is this a normal iRacing this or a setting thing ?
I have almost 1800 hours on ACC and it has good cockpit mirrors to judge distance of cars behind but I struggle hard on iRacing…
Need some help man 🥹 😅👍
Yeh man , the mirrors are great as wen you move your head in VR they changes the angle but looks really compressed!
I use the virtual mirror mostly which may not be that immersive but can change the FOV and put it 120 degrees to not feel that pressure from the cars behind 😁
@@chepilevski Yes I closed the virtual mirror for immersion but if it’s really needed, no other choice to put it on 😃 I’ll look at it later on the day. Thanks for the super fast reply, you took pole position with the fastest reply I ever received 😁 🏁
@@bmwM3M5M6 🤣🤣🤣 I try to keep up bro 😄
What would be your top recommendation for a budget of $500-700; if you don't mind me asking?
Heusinkveld or VRS are at that price and bot really good Jim !
@@chepilevski Thank you! I'll look into both, value your opinion!
Does this still hold true with the Simagic P1000 release?
If anyone is looking to buy these I have a basically new set for sale. Didn’t return in time to store. They are nice but I have heusinkveld ultimates.
Hi there
I have these pedals and I'm very interested to hear your recommended spring and elastomer combination if you are willing to share?
Hi buddy, I remember I choose the hardest elastomer with the red spring
Yes same here but I was interested in your comment about alternative springs and elastomers for moza to consider. I have a lot in the workshop so I could try myself
@@elwyncoe5798 ah cool, I would love to try something linear at around 50-60kg load
But the spring and elastomer must be with very similar strength
Got it thanks so much for reply!
I have the SRP (not light) pedals and have maintained from the day that they arrived the brake pedal feel is like a car where the brakes need bleeding in real life. Just far too much travel. I have yet to get th best out of any brakes that I have tried to be honest but you do really need a good starting point. As a result I have ended up with the upgaded elastomer kit, with the original elastomer cut down to approximately 25%, strengthened and supported with a flat washer between them and the original and softest spring now compressed due to lack of travel. Its kind of annoying because I feel like it will never be right. But, its a vast improvement on what it was like. Another great video as usual that I can confidently hit the like button even before watching it.
bro like i previously said am gonna get these pedals and thanks to you i did, can you PLEASE EXPLAIN what pressure point setting does in moza software us ? 100 means 100 kg load cell and 0 means 0 kg loadcell or otherwise ? it's very confusing i wanna use all of 100kg load cell on the brake how do i do it ? thanks mate .. community in moza isn't responding. see if you could help. love and peace
Hey buddy, the hardest set of elastomers and springs are around 80kg
The load cell however can be pressed up to 100kg just after you compress fully the elastomer and spring there will be no movement anymore but you will still apply pressure on the load cell itself!
Hope makes sense 🤛
@@chepilevski Thank you so much it took me good amount of struggle to get it straight. I'm new to sim racing and load cell is different universe ! Generally It's better to have the highest stiffness and highest load cell right ? for best precision trail braking ? Honestly speaking it's not that strong for me (ex super strong powerlifter here)
I can just about in one day can do my old times (f122 1:19:00 Monza) wanna transition into Iracing now so need to understand load cell pretty better. RIght now am using the highest force possible with these pedals. Hope am right (doing good laps so far) need to polish my driving from now on i guess :)
PS: Your videos have helped me so so much brother. So in depth and clear. seating position gap .. human reaction etc thank you
@@siliconcrayonthank you very much for your kind words buddy, it really means a lot !
I have my own opinion about pedals setting testing everything possible over the years and there are really few things you have to consider as it will save you in the long term!
Here a short video i did about and i hope will give you clearer idea what you have to look for!
How I setup my Brake pedal for max performance !
czcams.com/video/OiWnisgJ-NQ/video.html
hello friend when you make us a video of acc's fov visual options
It will be in the next one Vito 🤛
Mate can u do a review on the sim jack pro pedals id love to hear your apinion on them
How would you compare this to SIMAGIC P1000?
P1000 are way better and already my favorite pedestal set on the market for many reasons buddy 🤛
is anyone having issues with the clutch to where the games will only recognize the pedal if its at 100%? i calibrated it hundreds of times and have no clue why its doing that. makes road cars undriveable
No such problem.
@@mihailviloev8662 i fixed it lol. i had to also calibrate it through windows devices
@@SassyTheSasquatch11122 windows devices? Thats strange.
@@mihailviloev8662 yeah i dont understand either lol.
This Pedals or the najam simtec
Wel, those are better pedals in build and have way more potential but are twice more expensive! There no doubt those are better choice if money are not a question!
@@chepilevski OK thanks i currenty have the fanatec v3 Bit iam Not Happy i wanna sell them and buy new ones.i was also thinking about the moza and then i saw the najam For even less Money so iam Not Sure yet which i should buy
there's zero point clutches having this gimmicky bite point when they are never going to match up to the cars bite point in game, why do companies keep putting this gimmick in?
You can match that bite point in most of the sims I guess adding death zones! I do that for sure on iRacing and works good ! That’s being said, it is used just for the start at green light and then smashed it hard to change gears you can’t feel much of it 🤛
@WhippyWhip years ago people asked for a bite point because no pedals had one now all have it but most don't do it right. Huesinkveld is the best ive felt clutch wise.
The worst pedals I have ever owned. Ditched them and went Heusinkveld.
Not the best for sure 😞
Here in Australia mate.. Shits expensive and limited.. I went with bj load cells with the nitroflex. With discounts as a regular. Only a couple hundred more... These pedals have never appealed to me. Especially at the price..
Yeh man , I don’t know why you have to pay such a crazy prices there Matthew 🙈
@@chepilevski because it's the ass end of the world. 🤣