Silent Hill 2 Enhanced Edition Steam Deck Guide | The Best Version of a Survival Horror Classic
Vložit
- čas přidán 15. 06. 2024
- Silent Hill 2 a well loved survival horror classic. Fans of the game took it upon themselves to vastly improve upon the original director's cut version that was released to PC long ago. The enhanced edition runs fantastic on the Steam Deck and this video serves as a tutorial offering two alternate methods of setting the game up on the Steam Deck. This is a phenomenal way to play this game and really shows what an amazing job the community can do in modding a game they love to make the best version of it. Shout out to my good friend Chris for doing the research on setting this one up before I started making this video and setting up a controller profile for the game! Check further down for helpful links and commands mentioned in the video.
Subscribe for more Steam Deck and gaming videos:
czcams.com/users/SteelLodge?...
Chris' Controller Profile for "Silent Hill 2 Director's Cut":
steam://controllerconfig/silent%20hill%202%20director%27s%20cut/2846659763
Silent Hill 2 EE Website:
enhanced.townofsilenthill.com...
Lutris Website:
enhanced.townofsilenthill.com...
Launch Option for Method 1 if your game is on MicroSD:
STEAM_COMPAT_MOUNTS=/run/media/mmcblk0p1/ %command%
Video Chapters:
0:00 Intro
0:30 Preface to game installation
1:08 Method 1: Fully Extracted Game
3:28 Method 2: Game ISOs and Lutris
6:54 Silent Hill 2 EE Performance and Method Differences
9:53 Chris' Controller Setup
10:27 Ending
#steamdeck #silenthill2 - Hry
This was a very good instructional video! Thank you
Thank you for this tutorial. Game looks and runs absolutely amazing, it's my first time playing and it doesn't feel outdated at all. Have to say method 1 doesn't work anymore, had to do it via lutris with method 2! Thanks!
I'm grateful for this video. Thanks a ton!
Extremely helpful video, thank you very much !!
So pumped for this video!
method 1 worked great for me. Thanks a lot
Sweet!, Great game and great mod. Set this up over the weekend myself. Love how little battery it takes. Never would have thought to make a proton folder based on the mod install. Much easier than making proton on the vanilla game then jamming in the modded game and using proton tricks to make it run.
Method 1 worked perfectly along with the sound bug fix.
The PSP go failed because the world wasn't ready for digital only. And now here we are with the Steam Deck.
It's definitely a different era. PC Gaming has been almost exclusively all digital for a very long time now and people have built up massive Steam libraries. That makes picking up a device like the Steam Deck so appealing as I already have a library of hundreds of games on Steam and most of them will work on the Deck off the bat without me having to buy a new copy.
Tbh, I think the PSP Go failed because it was overpriced. I remember paying $250 for it on release and it only came with 16gb internal storage. It was the same as the original PSP except it offered no game cartridge support and cost more.
Psp go failed because psn has only 20-30% games libary in digital. I remember when I want to but pap go, but I coudn't play in GoW Chains Olympus. Only CFW solves this problem. Sony should make all games available digitally for the launch of this device. They killed PSP go him themselves.
To be fair, being a console, there was only so much you could do with a PSP Go without hacking it.
Great guide thanks a bunch
Great tutorial man, I always use lutris when it's a non steam game. steam tends to not jive right a lot off the times but will work more times than not with lutris
Thank you so much! Side note fingers crossed compatability improves for digimon survives.
Thanks for mentioning the launch option. I reinstalled SH2 from scratch thinking I did something wrong.
Man, the steam deck is such a good unintentional push for games to work on Linux. A game that works on the deck works for everyone else trying to play on Linux.
That’s absolutely valve’s intention
Worked, you are the best!
could u help?
Great Video. Is there a way to avoid the inicial menu where you choose between playing the game, setup or exit?
Hi so I’m having a bit of trouble. I followed the instructions to a T and was able to get the tool to launch just fine. But no matter what version of proton 7 I use (I even tried proton experimental), the game itself refuses to launch. I have tried this so many times and have failed 100% of the time. Am I missing something here?
Amazing game on amazing console!
Can’t wait to play this on stream deck 😭
I followed your guide months ago using method 2. Still works great but is there any way for steam deck to load directly into the game? I get a virtual desktop with a terminal asking first if i want to load into game or configuration.
SH2 ran when I exit the installer after it finished. It wont run again after I change the target to the exe. Play button changes to 'stop' for a few seconds then just goes back as a play button.
Same thing is happening to me
Same problem
you didnt post anything@@jze5574
@@jze5574where
@@jze5574 Why would you say you're putting it in the comments, and then proceed to not post it in the comments
BTW, there is a typo in the launch option string in the description
it should be "...blk0p1" but there is an extra 1 after the 0
Thanks for pointing that out 👍
I want to try this with my version that came on one DVD
As the 269th view I have to say this is the most cultured way to use the steam deck.
Sorry the second method is a bit confusing to me; When you search for the game through Lutris, does it download the 3 CDs and automatically add it to library? and How did you run the base game and EE installation together? does Lutris identify the EE installer in your folder as well and add it to the installation process?
So it will not download the 3 CDs you will need to obtain those on your own. When you run the Lutris script it will setup everything up and run the EE installer. The process is pretty straightforward. Hope that clears things up a bit.
@@SteelLodge I get it. I installed both DC and EE using the option "add locally installed game" in Lutris... but your method is easier
Hey mate, thanks for the video, I haven t been able to find those fing isos any tip?
Actually found them, but the installation progress pops wine with the icon but then nothing happens, the EE installer won’t appear and in lutris stays 4 ever loading !!! Help!!! Thanks!
So.. I managed to get it running with option 1... But once its install and run one time, I close it and then when I try to open it again, it fails to boot and then the second try an error pops out saying that the las time the game tried to run it had an issue, so it-s going to boot in a video safe mode.... and stays frozen.... I managed to have it boot again by forcing some resolutions, but it only boots the original game not the EE :(
Method one doesn’t seem to work anymore. No idea why.
Tried proton GE, tried changing paths, zip.
Sucks but whenever I’m not completely pissed off by my wasted time I’ll try method 2 out haha.
Either way, good video man. Need more creators to help with things like this.
Hey it works for me just fine on method 1. Using proton 8 latest version. Only thing is I can’t get it as a 16:10 aspect ratio, its stuck in 4:3
@@Birdo64 yeah eventually that was my issue after trying a bit longer. Ended up going with 2 and it works perfectly now.
EDIT: This method doesn't seem to work anymore. I have an updated guide on my channel for anyone that is having issues.
For anyone saying the first method doesn't work, you HAVE to change the "Target" of the SH2EEsetup exe file to the SH2pc exe. The installer will even say to do so. I skipped that part and added the games exe separately and it would just show as a white window and never load, saying it crashed last time. After adding the EE setup exe and hitting repair, then just choosing to just reinstall the EE EXE, after its done doing its thing, it will pop open a window that says the installer is running in wine, then at the bottom of that window, it will tell you to change the target file. I then swapped the target in steam to SH2PC.exe, it works perfectly. I did try to re add the setup exe file, then change the target in properties, and it still didn't work for me. If thats the case for you, just use the setup and again, repair ect, THEN swap the target file.
I did exactly that and it still doesn’t work.. should I wipe my Steam Deck and try starting from scratch?
O
I did everything he did step by step and still don’t work
@@mcmilliftw1166 were you able to fix it ?
@@Ruben-il9bk I was able to get it working, but in a different way. For some reason when I change the target to sh2pc.exe it just doesn’t want to launch so I just kept it to sh2pcee.exe and it launches but a window pops up to update or fix the mod so I just push save and continue and goes into the game. It’s a minor annoyance but atleast I got it up and running good now. I just have to deal with the pop up everytime I launch the game so it’s whatever
Run his first method, works perfectly on the deck and runs at 60 fps, so much better than how he had it in his video, probably due to the new EE patch
I can't get the game to start in Steam using that method, and I followed his guide very thoroughly multiple times. Not sure what I missed
@@kylepotter7690Were you able to work jt out? im having the same problem
@@Ruben-il9bk negative. I tried the Lutris/iso method as well and couldn't get that to work either. Would just boot into a black screen. I gave up and just emulated the PS2 version. Had 0 issues getting that to work.
@@kylepotter7690yeah that’s what I did as well afterwards
Hey I was able to get it started but it only lets me use 4:3 aspect ratios in the settings…any ideas how to get it to 800p?
Thanks for making this guide. I managed to get everything for method 1. Install on my PC first looks awesome. But the streamdeck with the same files just won't launch. Manage to get a white screen that gives the message "Silent Hill 2 Warning" A crash occurred the last time that game was played
Using safe graphics options.
I've removed it from steam, deleted the files, tried again etc.. but it refused to launch?
Did you solve your problem?
Attempted the 1st method. Launching the game leads to a white screen and a Silent Hill 2 warning box, which states “A crash occurred the last time that game was played.
Using safe graphics options.”
UPDATE:
I was able to get it working with the 2nd method. I also came across a definitive guide over on Reddit that goes further into detail, including guides for Silent Hills 1-4.
Could you link me to that reddit post?
@@DeejGuy same, I hate when they don't link their stuff for future reference
Can you link the guide please?
@@shidload I have linked the guide twice, the comment was removed both times. Just search Silent Hill 1-4 definitive guide reddit.
I’m so upset it no longer launches for me using method 1. I had to factory reset my Steam Deck and ever since then, Silent Hill 2 Enhanced Edition doesn’t launch anymore. Please help. :(
Hey, I know its an old video, but I've tried all this and nothings working, like it just dosnt start, even after it started in the first place but after that, it just dosnt boot up, any help please?
Would installing on a windows PC and just copying that folder to the SD work too?
The game works well! But the steam deck controller don´t work, how i can configure this?
Do the triggers work? I remember last time they did not work
I have my folder in my pc, simply I copied this and added the game via lutris but the deck ask fot CD1 while the same on my pc does not. It seem strange, usually the game folder from pc copied to the deck and adding the game via Lutris works... Do you know why this issue?
Can you share you config settings? Mines running at 22+watts
It won’t boot for me, I followed the first method and the setup finishes but the game wont launch
Same :( the only difference was that it shoed something about it using when when it wad finished installing. Hope anyone can help
saaame
Same here too
where can I download the archives for this game?
I had an error saying something about the d3d8 was set to it’s native resolution, the game doesn’t launch correctly because of it
My battery life is 2hr and 35 min when playing is it because my graphics are to high if so what's the recommended for a higher battery life?
I get to the page where I have to find the location of SH2 but there is just a bunch of things called windows,users etc but I can’t find my folders. I’m not using SD card.
what are the issues with 60fps? I'm assuming not performance because it's only using around 6.5 watts here at 30fps
Maybe because its a old game. Idk
I've got this running via Lutris, but when I launch it in game mode the resolution is flipped. So instead of 16x10, it's 10x16. Anyone have this problem? And a potential fix?
I just ran into this problem, were you able to find anything on this?
@@2000stasis I managed to get it working. I misread a step, and once I did it correctly everything worked out fine. Unfortunately I cannot remember exactly which one. I think it was something about not selecting anything when asking where to install. Just be sure to read the directions carefully when a virtual box opens and it goes through the windows install options.
Are you using arch to open the game?
Great video. I followed the directions in Method 1, but when I go to launch the game nothing happens. Wondering what I did wrong.
Seems like it may be a new issue, i'm assuming it might have something to do with the new installer the EE team put out. I got it working alright but with audio issues last week, but after trying to reinstall today i'm having the same issue as you with it crashing on start up.
@@senabea I did the Lutris walkthrough today and that worked like a charm!
@@jasonzapata8711 ohh interesting, gonna have to try that then. thanks!
@@jasonzapata8711Where'd you get a copy with the three ISOs? Can't find it anywhere
I used the first method and I got it running on desktop mode but can't get it to run on steam os no matter what proton version I use it just says it crashed and reverting to safe graphics but it doesn't do anything after that
Same for me
Can someone help? In desktop mode a white square appeared then the game crashed. Im using a fully extracted version. In steamOs gaming mode it doesnt launch at all.
Hi! I cant apply the config controller... dont show the apply button... Thanks for your work
Using method 2 worked for me! My only issue is adding the game to my steam library for easy access in gaming mode. Help pls!
Nevermind I figured it out! Thanks again for the vid!
How’s you do it?
Maaaaan I really want to play this but I'm still struggling to get it set up. Followed the steps completely but after it's finished installing the game just won't launch :/
Did you end up fixing it
I can't open that link for the controller on my steamdeck, it doesnt open anything, just searches the text. When I try and open it on my pc, it opens but the controller seems blank
what does extracted game means? is it the version that was installed on another computer?
A preinstalled version is basically how it would look in your programs folder on Windows, it's way easier to use games like that on the Steam deck since you don't have to play around with ISOs.
I did the same with the Simpsons hit and run
Are you opening through q4 wine?
Anyone have an issue when installing the game via Lutris were you get a “ MousePointer.png “ error? It forces you to cancel the install because it can’t proceed with the error. No matter what I do with method 1 it won’t launch. Method 2 seems to be working up until the error I get. The mouse pointer png seems to be a GitHub download from the looks of the start of the install. Ran it about 5-6 times so far with the same error resulting. Any help is much appreciate, TIA!
yes! did you find a fix?
@@joshlloyd7499 Unfortunately I did not. Super bummed about it haha.
Tried to install it about 10 different times with no working solution.
I even downloaded the files individually, browsed them and did installs that way, nothing worked.
The furthest I got was copying all functional files over to the drive, after multiple times and file replacements, and running it via lutris as a currently installed game via wine but it asks for CD, that's with the crack copied and working flawless on my desktop.
So it's like the cracked file isn't working on Linux.
Long story short I gave up haha.
Hope someone finds a fix that works, I've tried everything I could.
for some reason the browse button wouldnt work so i went to dolphin, right clicked a folder (any one!) and selected “open folder with”, “other applications”, “system”, “dolphin”, select Ok, restart your deck and try the browse button again. this all worked for me and my fingers are crossed that this works for you too!
@@joshlloyd7499 The browse function was working fine for me.
It's definitely quirky at times though.
Let me know if it works and what you did I'll give it a shot if it's outside of what I did.
the lutris installation link for the setup.exe is invalid. instead, download the setup.exe directly from the website. continue the process as usual, but after clicking install, when it brings you to the list of files needed and the “download” drop down options, on the first option, change download to select file and select the aforementioned file. this worked flawlessly for me and i hope it works for you all as well.
Am I crazy or is there no way to leave the save game screen? I was trying everything!
Need some help, method 1 isn't working.
Ok I did the first method. I try to launch but it says “no cd/dvd-rom drive found” and doesn’t launch. Followed every step.
I just did pcxs2 because I couldn’t figure it out. Game runs great.
Sounds like you might have been running the wrong .exe file. If you try to run the original game (without the enhanced installer) it gives you that kind of message. The enchanced edition should have a "no CD crack" built in.
Need help i go step by step using method 1 and the game launches everything is fine but once I exit the game I can no longer re-launch it am I doing something wrong. I figured out that once I launch it it forcese to bottles it while in the video it not once showed that you had to run through that process
Did you fix this?
@@Ruben-il9bkyes I got it to work, had to wine it using the bottles app
How?
The url didn't work for me, it just does a Google search instead. My controls are all wonky and I'm trying to fix them. Any help would be appreciated
When I go to run the exe it asks me what to open it with, any help?
Yeah, no, using method 1, the game boots up after exiting setup. After changing the properties to the other exe and it's directory, it crashes on start up. People in the comments have been asking for an update. Can you tell us a fix at least?
I encountered this issue and don't have a proper fix. However, if you don't change the exe and instead just run the game via enhanced edition setup that you installed with and use the config/setting tab, the game will launch fine. It's not tidy as you have to use the trackpad each time you lunch but the game is running fine for me.
man, i just found solution for this problem. Isit any sense to make video about it?
@@outlawkings6133how?
@@blueblase9981 i find out a solution i will put it on coments
Can this be done without an sd card?
Thank you so much for this video! When I tun it through Lutris, I mount my disks like normal, but once the Wine window opens to run the installation, it states "No CD/ROM drive found" and then closes, with Lutris saying that SilentHill2/MousePointer.png does not exist and I have no other option then to cancel the install. Anybody find a workaround? Anyone else have this issue?
did you figure anything out for a fix? running into the same problem
hey just tried this and it fixed it, its worth a try for you. the lutris installation link for the setup.exe is invalid. instead, download the setup.exe directly from the website. continue the process as usual, but after clicking install, when it brings you to the list of files needed and the “download” drop down options, on the first option, change download to select file and select the aforementioned file. this worked flawlessly for me and i hope it works for you as well.
@@joshlloyd7499 I'll try this tonight & let you know! Thank you so much man. Played the enhanced edition a few years ago on PC (first time playing SH2), and it was an instant favorite. One of the best of the best. I really appreciate it.
Where do you find the iso files
Does anyone know if this stil works both method with the newest update on silent 2 ee
EE
Anyone want to link me the three disc ROM? Can't find it anywhere...
My abandonware site
Downloaded and now I can’t find the file to swap😂 I did method one
the game crashes on start up with method 1 no matter what version of proton I use
did you find a fix?
@@boopbruh5767 don't recall finding one no, sorry
For those who says that first method doesn’t work anymore, I have a solution, I find out why it doesn’t work anymore and how to fix this. I need your feedback do community need video about fixing this problem and is it any sense to making video about this on my own channel?
Well looking through the comments people definitely need the fix, including me. Whether its through comments or a video, we would appreciate it for sure.
@@gavinrobinson2270 For anyone having trouble, the issue is that Wine needs to be told to allow the DLL overrides that the Enhanced Edition requires. You must also be using Proton GE. If your game is not working, set your compatibility tool to Proton GE and add this to the launch options box in the game’s properties: WINEDLLOVERRIDES="dinput8,d3d8=n,b" %command%
no 60 fps on enhanced edition???
Please do half life 2 mods next
So what now? Lot of people have issue with starting the game after method one. Including me. No one wants to help with it?
I tried this and neither method worked 🤔
Can't save. Anybody know how to fix that?
Fixed. Created a save folder in data
The controls don't work though.
Can you do once for silent hill 3
Machete. It’s a kitchen knife.
So ive followed all the steps of the first method. Everything was the same except when finsihing installing it said it changed to wine. Im a noob. it wont start now
It worked via method 2 for me! Thanks
is it working in Spanish?
Thanks for the guide, but the first method doesn't load for me. I may try method 2 but I am hoping for a fix.
Edit: Tried the second method and worked perfectly.
Good guide but the OG PS2 version also runs at a sweet 60 on SD. Worth checking out.
Lol no it doesn’t. It’s locked to 30fps
Literally did everything step by step and it still doesn't work, you gotta be leaving something out.
Dosent work. Steam just wont even launch it despite doing everything you told me to do.
PS2 version?
This works better than emulating the PS2 version.
@@SteelLodge What platform is it if not the PS2 version?
@@MrsBlaileen1 It's an upgraded version of the PC release
@@SteelLodge Oh wow…wasn’t aware SH2 was ever released on PC. It’s not on the Steam store. Only SH: Homecoming is. I’m going to try to emulate SH2 on the PS2 once I get my Steam Deck.
Yup, just a heads up this version is going to look and run a lot better than the emulated PS2 version and give you far superior battery life.
This tutorial is so outdated...
How would you do it?
or you could just install it on pc then copy it over to the steam deck
Play the PlayStation2 version is way better PCSX2 is way better
Unclear guide
HOW DO YOU BUY THE GAME ON PC PLS SOMEONE PLEASE
It's on my abandonware website (not my as in mine, but the actual site is that lol)
@@AndrewDaniele87 already finished 2 times
@laaps8589 awesome, I just set it up, I played it a bunch of times on ps2, looks amazing with the enhanced edition
It’s not working for me, I change the Target to the sh2pc.exe but it doesn’t work
Put quotation marks "sh2.exe" at the front and back of the entire path once you have selected, this fixed it for me
@@bradleybaker3121 thanks, I’ll try later and lyk
@@bradleybaker3121 it didn’t work, do you have a discord I could message you on so you could help me?
@@bradleybaker3121nvm got it😭
@@Bad_MuffinHow did you get it? I tried the same thing and it’s not working for me