2022 Yamaha R1 Breaks Dyno Record with These Must Have Mods
Vložit
- čas přidán 9. 11. 2022
- Find out what it took to get this 60th anniversary edition Yamaha R1 to make 190HP.
Bobby [Moore Mafia mechanic] IG @ holiday_468
Get your ECU Flashed by me.
Call me at 864-608-0119 or www.mooremafia.com/ecu-flashi...
Moore Mafia Drag Racing School
www.mooremafia.com/dragracing...
Moore Mafia Merch
www.mooremafia.com/shop
See some of the performance products we have at:
brocksperformance.com?aff=3
ENTER DISCOUNT CODE MooreMafia5 for a Special Discount!!!!!
To have us make your bike go fast like ours. Just call me
864-608-0119 Tuesday-Saturday 9am-6pm EST
Click this link to get 10% off your Chin Mount
chinmounts.com/?ref=chrismoor...
Use CODE MOOREMAFIA10 @ checkout
Click this link to get 10% off your Dragy
dragymotorsports.com/?rfsn=63...
Use code MOOREMAFIA10 @ checkout
Follow us on Instagram
@chrismooremafia
@bigkountrymooremafia
Tik Tok
@mooremafia - Auta a dopravní prostředky
Yamaha must have the best husband's, they never ever miss an anniversary.
♥️
😅
So cheesyyyy! 😂
😃
🤣
Wow. Beautiful R1 Anniversary 👍👍🤩 179 hp first run. After flash 196,197hp 😄
Yo Chris! Here is a challenge for the Moore Mafia. There are many R-1 fans. Why don't you get one and make it fast. I would love to see one with all the goodies on it (velocity stacks, full exhaust, flash, BST's, o-ring chain delite, extended swingarm, ceramic bearings, lowered riding position, and anything else you feel might help), please. I love the channel content. Keep it up. Lets see some roll racing on your Gixxer.
You mean road racing don't ya, not roll racing😀
whats o ring chain delete?
@@tkurban putting a chain with no o-rings!
@@lukaslafour sorryt thats my first time hearing that, but what exactly does it do?
@@tkurban this chains are usually used in low cc bikes anda are cheaper than o-ring chains. The adventage Is the less friction, so more hp!
Love my daily dose of Moore Mafia...never disappoints!
People must be watching the goat, and they love the sound! I get it, I want an R1 now as well.
That H2's titanium exhaust 🤤
I love your work... I can't wait to bring my 2012 R1 to you !!!!! So excited
U work hard 4 your family. BRAVO!
Amazing result Bro. 👍
It makes a huge difference I have it in my 2019 Yamaha r6 and the Chirs Moore mafia juice too and boy it pulls harder than ever
Sounds nice that thing 👊🏻✊🏻
I have a 2021 R1 with that exact exhaust. My sprocket and bearings are stock. Had mine tuned and noticed a great improvement from stock.
These things are real quick.. ran one out in the wild a few weekends ago on my s1000rr. Definitely wasn't expecting to see him next to me the whole run (only went to 150s)
Not condoning street racing, but just saying that based on most videos I've seen, S1000RRs start pulling away from other literbikes after 150. They get a second wind.
Xcept a gixxer!
@@ANSWERTHECALLOFJESUSCHRIST it all depends on the rider.
@@ANSWERTHECALLOFJESUSCHRIST except zx10r2022, the sbk champipn 🏍
@@ANSWERTHECALLOFJESUSCHRIST dreaming 🤡🤡
My 21 R1 makes 196 wheel with akrapovic evolution, new air filter, and flaps cut out front duct with a woolich tune. Livengood Motorsports Lawrenceville GA
Keep up the great videos and content coming more mafia...
I wonder if it would help to disconnect the battery prior to disconnecting the ECU in regards to the codes...
I love your channel ! Your a good entertainer...lot of good knowledge, passionate...keep on rocking !
Very well done you guys
Hi brother
Was waiting for yamaha r1 dyno review again because after watch your video I bought same 60th anniversary and I am really want to see as high as i can get power from my beautiful boy
Cannot tell you how much i luv this
Yamaha!!! 😻 Big Kountry loves it
man i miss my 04 limited edtion r1, i went back to suzuki because i felt like yamaha fell off a little but now you have my attention mr. moore!!!!
2006 was the year for the LE limited edition. Gold magnesium wheels, connecting rods and Olin’s suspension. I know someone who owns #62/500 since new. The 06 SE Special Edition was a stock R1 with the anniversary paint scheme.
Love The R1s
My 2022 R1 60th anniversary dyno'd 187.52 stock chain and rear sprocket, SC Project pipe, factory header.. high flow filter. AFR adjustments only, in South Florida Humidity, w temp in the low 80's..a good winter weather day in South Florida.. sounds like they are all pretty consistent, given weather, altitude and Dyno variables..
Dang Chris, everything you touch gets faster!
love to see old r1 on here
I'd love to see an R1 Turbo build, like B-Mumba... or even just street version
New tire makes smaller dyno numbers and no velocity stacks this is a very strong engine.Can you make a video explaining deference of crossplane engine on torque and horse power curve?
Damn, that thing sounds great !!!!!!
Hi Chris ! Been watching a lot of your videos lately and you have being doing an excellent job , keep it up . Since we have a lot of R1 owners here does anyone know if the 2004-2006 R1 has an Electronic Throttle Valve restriction ? I have my `05 R1 with Factory Pro stacks , KN air filter , ARROW decat link pipe , Akrapovic Evo SP mufflers . It must be running lean as Hell .....
Me and my step-dad wanna get our bikes tuned at your shop sometime before spring I have a 2021 r1 and he has a 2021 gsxr1000 hope to see you guys in the new year
I have the 60th and it made 201 rear tire with another tuner. Full Akro and sprint filter
Hi Chris love your vids, what are you doing on the new R1 with the IAT ? I get alot of heat soak and the temperature on the screen can be up to 20c higher than ambient temperature. No one has touched on this topic with the newer r1. Perhaps you could shed some light on your thoughts ? Thanks in advance and love from Australia
that thing does sound good... its different but i like it.
Serious gains but never been a Kawasaki fan .
2 gsxr 1000 drag bikes & a busa turbo pro street in my garage in England 🇬🇧.
Performance bikes have suzuki written on them .
Keep it coming Chris & huge congrats on 5 second pass 👏
R1 is Yamaha not kawasaki fyi
It’s a Yamaha bro 😂
How the fuck did you think this was a Kawasaki? Suzuki are overrated tbh
While we're talking about irrelevant brands, how do you feel about Harley Davidson? Aprilia?
my R6 did a high number on my mechanics dyno i just think M4 is an underrated brand more people should be buying them the only downside to them is the FULL carbon if only the end was like a metal as the heat from the exhuast is so much over time it will brown the carbon fiber around the hole ...but maybe thats all exhausts
Bike was throwing notifications like a iPhone that skipped a update 😅.
Sweet looking bike. Whats the cost on installing Ceramic Bearings?
add in an MWR airfilter would be a beast!
That r1 is nice.
Monster bike
What's the best air filter to put In a 2023 636
Very cool
What a nice ass bike.. thinking of upgrading to an R1 or zx10r…. Decisions decisions
Either my 22 anniversary is broken, are the guy doing my dyno pulls didn't know what he was doing. Mine only did 172. With the m4 mid, Chris's tune and a sprint p08.
Spoke with Chris about it, he thinks it was slipping on the dyno as well.
Dynos calibrated different from one to another, same bike different results...may be a big factor.
I have asked before,do you have a tune for a bone stock R1??just to remove the restrictions,clean up fuel delivery on and off transitions things like that. The thing is I wanna keep it collectible..but I’m sure it could run better in stock trim..lower the fan on temperatures will be a start, the thing runs hot by design of course. I have been riding for over 35 years I want to remain alive I don’t race and the bike is plenty fast for me,trying to keep my license too my job depends on it.
Are ceramic bearings ok for the street? Do they have a shorter lifespan? What's the catch? Price?
About to de cat my bike with austin racing gp3. Instead of installing servo buddy can I simply leave factory servo motor, remove the cables but leave the electrical plug connected so the engine will not show on dash.
Wharevah it makes it's gonna be smooth in the corners of you do it 👍 right
1st pull 165 b4 flash
180-185 after flash
Yahama R1's are good bikes. They have been ridden 2 several moto gp world championships
Awesome
Are these full ceramics, or just the cage and balls?
Was that the happy new father videoing from behind the glass? 🏍️😂
M4 for the win
Do you have the same check engine light issue with a 2010 R1 I want the ECU flashed, but then I would have to take it to the dealer to get the codes removed or is there a way to do it without the tool?
What brand ceramic wheel bearing are you using?
Which fuel do you use or recommend?
What fuel is in it? If you put in 102 octane in it make that a big diffrence?
Hey 520’chain and sprocket,stock gearing?or 1 down 2 up?
With the cat removed did the owner already remove the exhaust valve servo motor, add a block off plate, and remove the EXUP spaghetti?
Hi bro, can you share brand ceramic bearing with code number
Tyvm
Hi Chris how can I get the same thing on my bike and the Price. Cus I have the same bike thanks
whats a 520 chain conversion?. standard chain is a 520 aint it?. these come with smaller?
Hey Chris I emailed you guys about getting my 22 MT 10 flashed. Can you do it?.
Bro you gotta do a rocket3r!!
Was a Dyno run done before all the upgrades??
Nice. But what does it take to make 210hp on 07 R1
Is that fastlane D H2? 😮
176 on the first pull!
EDIT: Wow, that first one was unexpected. 😬
I’m running scproject gp70r and sprint p08 on my 22 r1 anniversary. Made 194 wheel on the Dyno
This is part of the reason I hate dyno readings. Different dynos will read a little higher/lower than others. It makes it hard to actually compare the hp between bikes. Chris Moore's dyno seems to read pretty low compared to others, but we've seen SO many bikes dyno'd on his setup that I feel like we can actually see how they compare.
Yeah, my 22 R1 same set up as urs dyno 187.52hp..in South Florida..
Will I loose my riding modes with a ecu flash and how do I disable my wheelie/ launch controls on my 2022 Zx10r? Please help. I wanna make the trip for you too tune and flash.
Doubt it. I have an ECU flash from Moore Mafia on my Gixxer and i still am able to use A and B mode. Best to send him an email. They respond extremely fast.
M4 exhausts are HP beasts.
And they sound great
Everybody wants a fast lane d R1
U no longer need the obd2 and adapter. My 22 anniversary fixed itself after around 50 miles of riding after a flash
I thought there wasn’t a ECU flash map for the R1 from 22-23 models.
What are the advantages of the cross plane, are there really any?
Smoother power pulses on rear tire in a corner on a racetrack rossi 45
What is the longevity of ceramic bearing street use setups? The dyno also doesn't take into account the front wheel drag and ram air effect. Curious to see real world 100-190+ times.
Ceramic bearings are not good foe the streets man. In nyc that sounds like a bad time
@@FlexFast Gotcha, thanks. I thought maybe there were some new materials out or something for motorcycles since so many people seem to be running them on street bikes now.
Where are you located?
If that bike is ridden to its potential regularly, I can’t imagine that 520 chain will last very long at all.
Wish we had a Moore Mafia in South Africa, man is ground breaker
He does remote tuning it's on his website. He also travels for tuning. You can get him to visit South Africa and tune bikes down there.
Nice R-1 Great tune! 👍 l might like me one?
Thanks for sharing 👍.
✌🏻🤘🌤🇨🇦
1st pull 175
177 1st pull
First pull 175
would have been cool if you had done a pull with the stock bearings so we can see the performance gains of the ceramic bearings.
Yeah!😢
thats a lot of work
@@jaythompson4824 yep, but how else you going to know how much they help..
@@roamconfidently3724 it wouldn’t show much change in the dyno results. There is a break in period before your able to get the full potential out of the bearings.
@@holiday_468 I am from the world of jet engines, and this is not my understanding of ceramics work. The ball is much harder than the cage and inner and out races. Any wear that occurs is going to be on an inner or outer race or cage assembly. Bearings are rated by ABEC standards, and the higher the standard the tighter the tolerances. Wear is not good in a bearing, if you want looser bearings buy an ABEC 5 instead of and ABEC 7 or ABEC 9. I have played with ceramics in a couple of other high rpm applications, and I have never seen a break-in period required. If you have not done it, try using an ultrasonic cleaner on the new bearings and running them dry or just a drop or two of a good thin synthetic if you want to see what they can really do.
Are ceramic bearings shorter life than stock?
In one of Chris' videos he says they last much longer.
@@IStarryZz thanks
161 first pull
that H2 tho...
179 first pull
# 1 💪🏻💯
Is that to the wheel? Sorry for a nowbie question😢
Yes, it’s to the wheel.
wow nice for an R1 with just the basic of mods.
158 first pull
What's the power at the crank? 200-213hp
+ 7-12 hp at crack... around 200 hp sure 👌
Is that Fastlane Ds Ninja H2?! I think soooo!
Nope! He needs to come on down though!
@@TeamMooreMafia He keeps saying he is. I found his channel through yours. Love the vids 👍
R1 sexy brah great vid 👌👍👏😍
Was there really 80+ hp left on the table just because of the throttle tuning they come with stock? Wow. Crazy! Thanks for the content!
Nah, it was just because the bike had the check engine light on which puts it in safe mode so it goes limp. It definitely would have made much more
@@Brandon35G Yeah, the check engine light was definitely the problem with this one. HOWEVER the ZX-10R will pull as much as 60hp at certain RPMs just because of the restrictions. Crazy.
Imagine if it had a decent exhaust on it would have made a couple more hp
Brand new tire didn’t help either
Is not sitting on the bike on the Dyno a thing now?
guy that owns delray cycle told me dont take it to a guy that doesnt sit on it. i should have asked why he said that.
First pull 183
190.5