HI Dave, it's a shame the other shop didn't even want to try to troubleshoot this amp !, you did a great job!, I hope that I can remember to check out the solder connections on the circuit boards in all equipment that comes to me for repair!
some shops just dont want to work on that kind of equipement too big too old to much time just to pull it apart , thats how i got my onkyo tx-nr906 for 80 canadian$ just because the old owner had issues after some one installed 2 fans in it to cool the digital board , and after the usb port and network port was not working took me a lot of time to dig in it enough to find that some one had disconnected a simple flat cable but still took a lot of time just to find the issue fix it and put it back together a lot of screws on thoose big amp`s
@@c4shd34d30 I won't work on them for others. If given to me I will look for simple stuff but if i am digging into multiple boards I'll give it away to someone more commited to it than I am. After dealing with this crap for over 40 years I am not as motivated these days and nobody wants to pay. That reel to reel Sony that I spent the better part of 2 days on is still sitting here bill is 200 and owner questioned why it was so much to fix. With all the testing and probing I probably spent 12 hours on it. (Also considering that just stopping and starting the tape fixed it for about 20 minutes till it faded out again ). Lots of keyboard warriors that post that they will pay or have paid hundreds to have vintage stuff repaired. Well in the 40+ years i have been doing this I haven't met one yet. Most will go to about 100 and after that they scrap. Highest repair bill I have had in the past several years was for the Samsung TV backlight repair. That was 300.00. Out of that, the backlights were 80us, which was about 110cdn, 30us shipping so 50 cdn and then fed ex billed me 47 in broker fees. So about 185 in my costs and i got 300. I made 115 and for that i got to take the tv apart twice. First time when i thought it might just be 1 open led only to discover that most were shorted and bad. I figured the owner would toss it but he insisted to fix so I had to reassemble, order parts and rip it apart a second time. I seriously doubt i will change another backlight due to the cost.
@@12voltvids I speculate that could be the answer right there why the shop didn't repair it. If you could get away with charging a 95.00 fee for only looking at it, that's easy money. They know the customer is never going to pay anything upwards of that fee for an actual repair.
That's a beast. Sell it quick while it still works! I'm also on the Yamaha mission at the moment. I just took 3 units for repair and decided to buy a load more from the classifieds here in France. Making some low ball offers because by the time you ship it in and sell it and ship it out again it's not easy to make much profit. I'll try to sell them locally but i think i already have the amplifier market saturated here. lol One tuner amp had a strange failure after i fixed the bad 5V reg. It was all working but i had to clean the volume encoder, i stripped the front, cleaned the encoder put it back together and then no longer saw PRY voltage which should be 4.8V on the RX-V630rds, I could not understand why the microprocessor failed after i dismantled the front, it still appeared to be booting so i took a 4.8V from the perma supply to the processor and i routed it back to the standby relay input PRY. This means it's basically on permanently, probably no more remote activation. I'm going to tell my friend to unplug it when not using it. Too much of a mission to get a new micro processor as it would need programming. I was wondering if it switches in 4.8V to PRY from Vcc on the processor or if the processor has a separate 4.8V input that then is switched through to PRY, perhaps it is missing this 4.8V in so it can no longer output it although you can see it stabilise 0,05V on PRY so it is trying to do something. Already put too much time into it so it's going to stay in bypass jumper mode that i created unless i have some sort of revelation. Thinking this might have been static damage which would be my first encounter but it's a pretty old processor, v chunky. a M30622M4A
Nice re-fab Dave. I have a Yamaha amp that a customer gave me a couple years ago. It would go into safety lockout. I ran some preliminary checks . Since that time , watching plenty of your vids has increased my tech / electro knowledge and I plan to put it back on the bench and give it another whirl as a winter project. Meanwhile, the Harley is in the garage and Houston is forecast to get some near freezing temps this week. Stay safe and cozy Bro.
Congratulation with the Yamaha unit. I have a old Yamaha RX-V461 unit and i love it because of the very good sound of the amplifier. A somewhat weird thing on my Yamaha unit is that i must hold on the power button on the remote until i hear the 2 clicks in the relay too engage on the Yamaha unit to power it up, if I don't do that it's going to hung up on the 1 click in the relay and get stuck and then i must disconnect the power cord and connect it again to the unit to get it working properly. The radio on my unit got a failure some years ago and the symptom reminded my of a failed transistor, the FM radio station i listened to just faded away in white noise and i got no other radio reception on any other frequencies. But i have coupled the Yamaha unit on a internet/FM and digital radio unit so that is taken care of. The original remote got a failure on the volume up button and i searched the eBay and got one cheap there. The amplifier in the unit itself has worked flawlessly. Great video 😊👍
The display brightness can be lowered from amp menu (need remote) , it's prob set on low.Good easy fix, it's a pain once you have to dive in and reasemble just to test.
I'm with you on that one; the introduction of lead-free was shi- for solderability, QC and longevity/mech. strenght/resiliency. Marginally better for production staff (maybe). What was gained on health lead free was probably lost in other more aggresive chemicals/flux elsewhere. Because of good trash handling in Europe nothing was gained for environment... Lead free maybe made things better in India and Chinese trash heaps..?
Yes, I just re-soldered some bad points on a LED flashlight that required turning on the switch and then slapping it with your hand a few times in order to turn it on (only to have it mysteriously turn off at the exact moment of needing a flashlight). It seems to be behaving itself now.....
Just had an AVR that kept shutting down. I pulled the main board and wouldn't you know it the pins on the front output module were lose! A reflow got the thing working without fault! Lead free solder strikes again! My Pioneer AVR requires the remote to control the fluorescent display dimmer, but it also brightens back up when you try try to control it.
24:26 those Yamaha displays were always and are still always super dim by design on their AV receivers. As I understand it the videophiles find an easy to read display distracting or something.
Hi! Receiver going to comme back with same fault: you have problem with C4 (value is lower than it should be) there, on that STBY board.... (change it and you will be fine). This is know many YAMAHA RX-V fault.........(If i remember correctly: you allready had same kind of problem with another YAMAHA previously....)
Definitely agree about the C4 Capacitor, had the same problem on 2 previous RX-V Receivers and replaced capacitor on both units and both running fine years later. Cheap fix.
Sir good day to you... Same problem with my amplifier and same model.. can i ask sir what is the problem of the amplifier. Would you mind sir. Please..
Quite happy to accept the need to cut lead out of waste products wherever possible, but when taking the lead out makes stuff more likely to go to landfill prematurely in the first place you have to question the logic. At least allow its use in areas where lead-free is known to cause reliability problems. A few remaining repairmen around here are terrible for charging for callout and then having no intention of repairing stuff, preferring to try to use it as an opportunity to sell a new one to customers. I had that with an LG washer a few years back, guy came out and told me BER (turns out it was dead transistor on control board, fixed myself), I paid up and gave him his £40 but I did so through gritted teeth (and a few choice words when he tried to sell me a £200 Zanussi for £300 with the call out charge taken off the bill), he didn't even look at the bloody thing! He even advertised no call out charge but had some excuse for that as well - I will always honour my side of the deal but that is just shady.
I'm pretty sure the lead free thing is just a scam to make an excuse to save enough lead for the billions of car batteries we have been using over the last 50 years or so.
What camera do you use to capture these videos? Your videos are sharp and the details are always easy to see. I have some projects I would like to capture at my work bench, and the cameras I have available are either impractical (size/weight of a DSLR) or they don't yield a sharp enough image (10yr old GoPro).
I use a Sony FDR ax53 which is a 4k video camera. Has a 20x lens for good close up work. I do my shooting in 28mbit avchd 1080p60 frame. There is a higher quality 50mbit 1080 mode as well as 2260p at either 60 or 100 mbit 30 frame 4k. I don't use that as my computer takes longer to render 4k and it is unnecessary fir this work. I use 4k for scenery videos.
Thank you for replying! I'm saving up for a new camera and your info will help me narrow down the choices that exist, it's pretty overwhelming how many cameras are available on the market used and new. @@12voltvids
I got the same one too but not any sound. Is going on and everything else also USB BUT what I have just low low sonde out of zome3 none other channels. Can scan the radio but not sound to Is really nice AMPLIFIER not sure what is wrong
Yamaha have always had pretty good sound. Personally I am using an old Onkyo but that's only because I got it for 40 bucks. When it breaks this one will be next in line i think. Have to get a remote for it though. Or if i fix the other Onkyo that blew up when a bunch of geese thought power lines looked like a good place to land.
@@12voltvids I have a RXV-1700 in-service.. never had any issues with this high output amp over 8 years. The 'mystery' speaker output (non banana) is for Presence Channels. Chances are that speaker set has been disabled in original setup. Yeah... you need the remote to setup many functions, aside control the thing easily (note the minimal control functions located on the Amp) The correct remote model number is: RAV361 - WH25420EX The remote is rather large and 'learn' programmable to control sources and TV functions. Has no less than 66 buttons, some multi functional. It uses 4x AAA cells... not the typical 2x AA or AAA cell job. This has a green coloured LCD display ( earlier 'top shelf' models had similar remotes with orange coloured illumination) Won't be cheap to replace. I would have replaced all of the red film Caps on that standby board. A common 'old age' fault is the unit powers up and then drops out due to such a Cap fault.
Mr 12Volts, amazing channel. Sorry I am commenting this on this video because it’s probabaly the one you check the most, I have an issue with a Sony handicam not playing the tape if I fire you some PayPal cash would it be possible to send you a video of the issue please? Many thanks
And the lying corporations claimed it was government control, just like washing machine manufacturers that started building junky machines that fail in less than 4 years.
If it was a paid repair perhaps 100. He paid 95 at the vintage audio repair shop only to be told to scrap it. They offered to recycle it for him which I think is their way of hoping he would have said keep it then they would have fixed and sold for hundreds. That is the rumour about that shop. I won't mention them or respond if anyone speculates as to which shop. Any comments that mention any shop by name will be removed so any locals that feel they should call the shop out don't do it here. You have been warned. I know what they do because i know someone that took a piece of equipment in and was told no parts were available so they told them to recycle only to have it show up for sale listed at over 1000. Before you ask, it was a customer I met at my day job. They didn't know i repaired equipment and while i was there working on their internet we got to talking about stereo gear because they had some nice pieces and I mentioned i used to run the old local shop and that I still work on stuff at home. Then the other shops name came up, fella asked me if I had heard about them and proceeded to tell me about his experience and what they did and then show me pictures of his equipment that they as he put it "stole" from him up for sale for a small fortune. I guess if I were to sell this for a few hundred dollars the guy that gave it to me could say that about me too and call me a crook.
I have a 1:1 transformer in my garage from some industrial install. i can not really lift it it's so huge, it's still in a steel box but even out of it's box it would be huge, i think even at that size it's only rated at 2000W Insane, i would have thought it would be 10Kw.
HI Dave, it's a shame the other shop didn't even want to try to troubleshoot this amp !, you did a great job!, I hope that I can remember to check out the solder connections on the circuit boards in all equipment that comes to me for repair!
some shops just dont want to work on that kind of equipement too big too old to much time just to pull it apart , thats how i got my onkyo tx-nr906 for 80 canadian$ just because the old owner had issues after some one installed 2 fans in it to cool the digital board , and after the usb port and network port was not working took me a lot of time to dig in it enough to find that some one had disconnected a simple flat cable but still took a lot of time just to find the issue fix it and put it back together a lot of screws on thoose big amp`s
I believe they only deal with 2 channel gear. Anyway the guy paid 95.00 to have them tell him it was shot and he gave it away.
@@c4shd34d30 I won't work on them for others. If given to me I will look for simple stuff but if i am digging into multiple boards I'll give it away to someone more commited to it than I am. After dealing with this crap for over 40 years I am not as motivated these days and nobody wants to pay.
That reel to reel Sony that I spent the better part of 2 days on is still sitting here bill is 200 and owner questioned why it was so much to fix. With all the testing and probing I probably spent 12 hours on it. (Also considering that just stopping and starting the tape fixed it for about 20 minutes till it faded out again ). Lots of keyboard warriors that post that they will pay or have paid hundreds to have vintage stuff repaired. Well in the 40+ years i have been doing this I haven't met one yet. Most will go to about 100 and after that they scrap. Highest repair bill I have had in the past several years was for the Samsung TV backlight repair. That was 300.00. Out of that, the backlights were 80us, which was about 110cdn, 30us shipping so 50 cdn and then fed ex billed me 47 in broker fees. So about 185 in my costs and i got 300. I made 115 and for that i got to take the tv apart twice. First time when i thought it might just be 1 open led only to discover that most were shorted and bad. I figured the owner would toss it but he insisted to fix so I had to reassemble, order parts and rip it apart a second time. I seriously doubt i will change another backlight due to the cost.
@@12voltvids I speculate that could be the answer right there why the shop didn't repair it. If you could get away with charging a 95.00 fee for only looking at it, that's easy money. They know the customer is never going to pay anything upwards of that fee for an actual repair.
@@BrainHurricanes Crooks
That's an awesome pickup Mon Ami .....
That's a beast. Sell it quick while it still works! I'm also on the Yamaha mission at the moment. I just took 3 units for repair and decided to buy a load more from the classifieds here in France. Making some low ball offers because by the time you ship it in and sell it and ship it out again it's not easy to make much profit. I'll try to sell them locally but i think i already have the amplifier market saturated here. lol
One tuner amp had a strange failure after i fixed the bad 5V reg. It was all working but i had to clean the volume encoder, i stripped the front, cleaned the encoder put it back together and then no longer saw PRY voltage which should be 4.8V on the RX-V630rds, I could not understand why the microprocessor failed after i dismantled the front, it still appeared to be booting so i took a 4.8V from the perma supply to the processor and i routed it back to the standby relay input PRY. This means it's basically on permanently, probably no more remote activation. I'm going to tell my friend to unplug it when not using it. Too much of a mission to get a new micro processor as it would need programming. I was wondering if it switches in 4.8V to PRY from Vcc on the processor or if the processor has a separate 4.8V input that then is switched through to PRY, perhaps it is missing this 4.8V in so it can no longer output it although you can see it stabilise 0,05V on PRY so it is trying to do something. Already put too much time into it so it's going to stay in bypass jumper mode that i created unless i have some sort of revelation. Thinking this might have been static damage which would be my first encounter but it's a pretty old processor, v chunky. a M30622M4A
Nice re-fab Dave. I have a Yamaha amp that a customer gave me a couple years ago. It would go into safety lockout. I ran some preliminary checks . Since that time , watching plenty of your vids has increased my tech / electro knowledge and I plan to put it back on the bench and give it another whirl as a winter project. Meanwhile, the Harley is in the garage and Houston is forecast to get some near freezing temps this week. Stay safe and cozy Bro.
Congratulation with the Yamaha unit. I have a old Yamaha RX-V461 unit and i love it because of the very good sound of the amplifier. A somewhat weird thing on my Yamaha unit is that i must hold on the power button on the remote until i hear the 2 clicks in the relay too engage on the Yamaha unit to power it up, if I don't do that it's going to hung up on the 1 click in the relay and get stuck and then i must disconnect the power cord and connect it again to the unit to get it working properly. The radio on my unit got a failure some years ago and the symptom reminded my of a failed transistor, the FM radio station i listened to just faded away in white noise and i got no other radio reception on any other frequencies. But i have coupled the Yamaha unit on a internet/FM and digital radio unit so that is taken care of. The original remote got a failure on the volume up button and i searched the eBay and got one cheap there. The amplifier in the unit itself has worked flawlessly. Great video 😊👍
Good repair👍👍👍👍👍
Good and stable device Yamaha RXV
The display brightness can be lowered from amp menu (need remote) , it's prob set on low.Good easy fix, it's a pain once you have to dive in and reasemble just to test.
I'm with you on that one; the introduction of lead-free was shi- for solderability, QC and longevity/mech. strenght/resiliency. Marginally better for production staff (maybe). What was gained on health lead free was probably lost in other more aggresive chemicals/flux elsewhere. Because of good trash handling in Europe nothing was gained for environment... Lead free maybe made things better in India and Chinese trash heaps..?
this almost always winds up being a faulty mylar film capacitor, havent watched it through yet, let's see if I'm right
nope, Schrödinger's solder joint
Yep, if he didn't replace the (22nF ?) cap on the standby board it will likely fail to start sometime in the future.
Yamaha built some nice amps! That one has a lot of circuit boards and capacitors!
Yes, I just re-soldered some bad points on a LED flashlight that required turning on the switch and then slapping it with your hand a few times in order to turn it on (only to have it mysteriously turn off at the exact moment of needing a flashlight). It seems to be behaving itself now.....
Nice! You should have popped in for a cup of tea whilst you were North Van, Dave
Just had an AVR that kept shutting down. I pulled the main board and wouldn't you know it the pins on the front output module were lose! A reflow got the thing working without fault! Lead free solder strikes again! My Pioneer AVR requires the remote to control the fluorescent display dimmer, but it also brightens back up when you try try to control it.
24:26 those Yamaha displays were always and are still always super dim by design on their AV receivers. As I understand it the videophiles find an easy to read display distracting or something.
so its yours thats even better
😄
Excellent snatch!!
Hi! Receiver going to comme back with same fault: you have problem with C4 (value is lower than it should be) there, on that STBY board.... (change it and you will be fine). This is know many YAMAHA RX-V fault.........(If i remember correctly: you allready had same kind of problem with another YAMAHA previously....)
Ain't coming back as it's my receiver.
Ok, but it will have same fault after while (thermal dependency...)@@12voltvids
@@kalulukakaluluka9497 likely not going into service any time soon.
Definitely agree about the C4 Capacitor, had the same problem on 2 previous RX-V Receivers and replaced capacitor on both units and both running fine years later. Cheap fix.
@@12voltvids That model Yamaha will crap all over the Onk'. ;-)
Sir good day to you... Same problem with my amplifier and same model.. can i ask sir what is the problem of the amplifier. Would you mind sir. Please..
Quite happy to accept the need to cut lead out of waste products wherever possible, but when taking the lead out makes stuff more likely to go to landfill prematurely in the first place you have to question the logic. At least allow its use in areas where lead-free is known to cause reliability problems.
A few remaining repairmen around here are terrible for charging for callout and then having no intention of repairing stuff, preferring to try to use it as an opportunity to sell a new one to customers. I had that with an LG washer a few years back, guy came out and told me BER (turns out it was dead transistor on control board, fixed myself), I paid up and gave him his £40 but I did so through gritted teeth (and a few choice words when he tried to sell me a £200 Zanussi for £300 with the call out charge taken off the bill), he didn't even look at the bloody thing! He even advertised no call out charge but had some excuse for that as well - I will always honour my side of the deal but that is just shady.
I'm pretty sure the lead free thing is just a scam to make an excuse to save enough lead for the billions of car batteries we have been using over the last 50 years or so.
What camera do you use to capture these videos? Your videos are sharp and the details are always easy to see. I have some projects I would like to capture at my work bench, and the cameras I have available are either impractical (size/weight of a DSLR) or they don't yield a sharp enough image (10yr old GoPro).
I use a Sony FDR ax53 which is a 4k video camera. Has a 20x lens for good close up work. I do my shooting in 28mbit avchd 1080p60 frame. There is a higher quality 50mbit 1080 mode as well as 2260p at either 60 or 100 mbit 30 frame 4k. I don't use that as my computer takes longer to render 4k and it is unnecessary fir this work. I use 4k for scenery videos.
Thank you for replying! I'm saving up for a new camera and your info will help me narrow down the choices that exist, it's pretty overwhelming how many cameras are available on the market used and new. @@12voltvids
@@killertimes I have 3 in use. FDR AX33, FDR AX53 and FDR AX100. The 33 and 53 used for CZcams videos.
Hey I need to tune a cassette deck and it needs a 1khz input at -10db what equipment do I need to do that?
Awsome score :)
Nice find…. 👌
Oops Happy New Yeas .....
I got the same one too but not any sound. Is going on and everything else also USB BUT what I have just low low sonde out of zome3 none other channels. Can scan the radio but not sound to
Is really nice AMPLIFIER not sure what is wrong
Any thoughts on the usual receiver brands over the last few years for sound quality and reliability, do you prefer jvc, yamaha, sony etc?
Yamaha have always had pretty good sound. Personally I am using an old Onkyo but that's only because I got it for 40 bucks. When it breaks this one will be next in line i think. Have to get a remote for it though. Or if i fix the other Onkyo that blew up when a bunch of geese thought power lines looked like a good place to land.
@@12voltvids I have a RXV-1700 in-service.. never had any issues with this high output amp over 8 years.
The 'mystery' speaker output (non banana) is for Presence Channels. Chances are that speaker set has been disabled in original setup.
Yeah... you need the remote to setup many functions, aside control the thing easily (note the minimal control functions located on the Amp)
The correct remote model number is: RAV361 - WH25420EX
The remote is rather large and 'learn' programmable to control sources and TV functions. Has no less than 66 buttons, some multi functional. It uses 4x AAA cells... not the typical 2x AA or AAA cell job.
This has a green coloured LCD display ( earlier 'top shelf' models had similar remotes with orange coloured illumination) Won't be cheap to replace.
I would have replaced all of the red film Caps on that standby board. A common 'old age' fault is the unit powers up and then drops out due to such a Cap fault.
Mr 12Volts, amazing channel. Sorry I am commenting this on this video because it’s probabaly the one you check the most, I have an issue with a Sony handicam not playing the tape if I fire you some PayPal cash would it be possible to send you a video of the issue please? Many thanks
I check all the videos. When someone comments I shows up on the feed.
@@12voltvids can you help me?
take that as a no then
@@swashyhimself you would have to put on CZcams and send link as I don't accept files. To much chance of a virus.
Lead solder The Best- Ince they went to lead free solder thats when issues happen cracked solder joints
And the lying corporations claimed it was government control, just like washing machine manufacturers that started building junky machines that fail in less than 4 years.
would this be a cheap fix for him good it came on
If it was a paid repair perhaps 100. He paid 95 at the vintage audio repair shop only to be told to scrap it. They offered to recycle it for him which I think is their way of hoping he would have said keep it then they would have fixed and sold for hundreds. That is the rumour about that shop. I won't mention them or respond if anyone speculates as to which shop. Any comments that mention any shop by name will be removed so any locals that feel they should call the shop out don't do it here. You have been warned. I know what they do because i know someone that took a piece of equipment in and was told no parts were available so they told them to recycle only to have it show up for sale listed at over 1000. Before you ask, it was a customer I met at my day job. They didn't know i repaired equipment and while i was there working on their internet we got to talking about stereo gear because they had some nice pieces and I mentioned i used to run the old local shop and that I still work on stuff at home. Then the other shops name came up, fella asked me if I had heard about them and proceeded to tell me about his experience and what they did and then show me pictures of his equipment that they as he put it "stole" from him up for sale for a small fortune.
I guess if I were to sell this for a few hundred dollars the guy that gave it to me could say that about me too and call me a crook.
Hi Dave, what size isolation transformer do you have there?
I believe it's a 600 watt.
I have a 1:1 transformer in my garage from some industrial install. i can not really lift it it's so huge, it's still in a steel box but even out of it's box it would be huge, i think even at that size it's only rated at 2000W Insane, i would have thought it would be 10Kw.
@@izzzzzz6 my isolation transformer weighs perhaps 10kg
How is silver solder?
Elon musk who was on Joe Rogan's program today Tuesday, October 31, said "no one ever died from Fukushima"
Did he spark up a big ass bab marley joint?
@@12voltvids😂