Image Transfer and Custom Paint on a Motorcycle Chopper Tank, water slide decal
Vložit
- čas přidán 11. 02. 2022
- Paint Supplies Here👇
limelinepaintsupply.com
LiME LiNE on Amazon
www.amazon.com/shop/timewarpc...
Hey, whats up guys. In this video I will be custom painting a chopper tank with a few different methods. I use a torch to create a fire technique that i later apply a brandywine candy paint over the top then clearcoat to lock it down. Remember if you clearcoat you will need to sand and or scuff with 600 grit in order for the next layers of paint to stick. I also applied a (Clear) waterslide transfer paper and I ran through my ink jet printer to print the design. The white basecoat locks down the ink so its protected once submerged in water to release the backing from the water slide paper. Once applied to the part the ink is trapped between the white basecoat and the waterslide. Be sure all of the water and air bubbles are removed before moving onto clearcoat. When clearing a waterslide decal its important to remember to apply 3-4 really light coats to prevent the edges from floating. I applied silver leaf with sprayable sizing glue from LiME LiNE. The glue dries fast with only 2-5 min dry time before you can start leafing. I you plan on Spinning (engine turning) your leaf like I did here in this video be sure the leaf you are using spins. I have came across allot of other brands that just dont spin the same and have problems with burn throughs. I pinstriped the leaf edges with tape and an airbrush that way the paint lays thin and I know that the clearcoat will not have a reaction because Im using the same basecoat paints all the way through. Clearing over some pinstriping paint can cause separation or other problems if not careful.
Let me know if you have any Questions in the comments.
Thanks for Watching
Join this channel to get access to perks:
/ @timewarpcustompaint
Join this channel to get access to perks:
/ @timewarpcustompaint - Auta a dopravní prostředky
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
Did you not apply the decal upside down? All the ones in your store you slide the decal off the paper with paper side down towards the surface. It looks like you applied it with the adhesive side facing upwards
Yes that’s correct the smooth basecoat on the waterslide decal clings to the sanded clearcoat on the tank much better adhesion then what little tack is provided on the top side of the decal. Doing it this way traps the ink between the basecoat and the waterslide decal both methods work this one is better
@@TimeWarpCustomPaint the only thing I don't understand. If you paint the paper and then you slide the painted side to the metal. How does it attach to it?
Because I assume once you paint the paper you got to wait for the paint to dry before you stick the water slide in water.
So if the painted side of the paper is dry and only wet from the water. What makes it stick to the tank.
@@ProwlersPit just the water as the decal is so thin then after it's coated over the top it traps it there, the same as if you wet a piece of paper it would stick to a window
@@jamesd1866 Exactly. Or like if you set a wet coffee cup on a paper towel, and it leaves nice paper ring on the coffee table.
He did for some reason, I didn't think it would work the way he did it
Rather hear background noise or even you talking than that horrible music
Definetely not my style but... what a masterpiece.
That`s the most "labor intensive" eleven minutes I`ve witnessed in a LONG time ! ARTISTS make Life worth living. Can Do !
I can’t lie, I was skeptical when I saw “image transfer” on the title. I was thinking it should be hand drawn or airbrushed. After seeing this I was completely blown away!! Absolutely 100% beautiful!! Amazing! The work you put in, sanding between the multiple coats, the colors, the silver leaf, and the way you blended the image. New subscriber here.
You are remarkably talented with that tape. Eyeballing a perfect line without a crinkle! Mark of a master
Thank you!!! I appreciate you watching
Truly amazing. The talent this guy has and passion to produce quality work, his techniques are flawless. Really amazing to still see hand made stuff like this still being done.
Thank you !! I appreciate you watching
@@TimeWarpCustomPaint how for something like this but Azteca culture one.
It great to see people are still doing what my father did in the 70's!
Wow!! I’m neither a bike guy or a painter and this is absolutely fantastic. I used to paint electric guitar bodies so I knew that end reveal was going to be popping!!! Fantastic.
Looks really really cool. I absolutely love the subject. It’s an incredible image. I’ve sprayed 1000’s of gallons of laquer commercialy but never had the opportunity to do something like this. Great job and thank you
That is awesome!
Always watch these videos to the end. Novices like myself see the stages and think, that's going to look like crap, simply because I can't see the finished product in my mind. This isn't just a painter, this is an artist. Very well done!
I appreciate that thanks for watching
It's amazing how all the components and detail become the final product. All those steps. You really have to be an artist. The finished job is spectacular.
I saw this bike at a show in Phoenix a couple weeks ago! It was a lot of people's favorite! Definitely mine!
I appreciate that!!
Honestly you’re a genius, the videos are amazing. They’re easy to follow because your explanations are incredible. And even if you’re not trying to paint, you can just binge watch the videos they’re so good.
I appreciate you
Right!!
@@TimeWarpCustomPaint . Need a more in depth video on the image transfer. Thats pretty sweet.
@@chrislangdell117 first it goes on the hard drive then to CZcams via internet. You're welcome.
Power ɔɔpɔɔɔɔɔɔɔ
I had the opportunity to see this bike first hand at The One Bike show in Portland Oregon this year. Amazing work!
thank you
One word "beautiful 🎉"......I wish my bike tank was done from him like this. ❤
Awesome work. I have a suggestion for you. In the world of glass gilding you can get a mirror shine from silver/gold leaf, by smooth and high glossing the area you are going to gild. And then apply the silver/gold, not with glue. But with gelatin dissolved in hot water. Using that as your adhesive when drying, the gelatin will stretch out the silver/gold to an almost perfect mirror shine. Thought it could look cool on a tank as well. Be aware that it won't stick good as when using glue, so maybe a bunch of clear coat and a sanding could cover it nicely? You surely know that better than me. Any how, just a suggestion. Still awesome work!
The original art work is called
“The Triumph of Christ” by artist Gustave Dore from the year 1868. Which is what makes it more awesome looking at it on a modern machine using modern technology!
Wow that's a really good point. Brings a whole different facet to the art. Poignant, not just amazing. What a name too. I love that piece so much. I'm going to look for it for my shop wall.
I can remember applying decals to model cars the same way. Was not aware it could be used on real life items. SWEET!!!
Right on thanks for watching
Pretty amazing for only 11 minutes and 35 seconds. Can’t imagine what you could do in a 40 hour work week. That’s some pretty amazing next level artwork.
I absolutely love this! I'm an artist myself just a God given talent that I've had since I was a kid. I've taken air brush classes several years ago but never really got into it since the classes were short and really not detailed like this. I admire your dedication because it takes a lot of time commitment and patience to be come an artist and to be really good at what you do! I've recently took up woodburning and absolutely love it! Whatever artwork you love just stay committed. Keep up the great work!
So true man thank you for the comment
As an art teacher and a custom painter, the main issues with teaching people to use and airbrush, is the same as pin stripping or freehand lettering is muscle memory, which comes from repeat practice, I've never met an artist who even though was mentally a great artist who didn't do great work without hours and hours of prarice. Don't give up on the info you've gained, but it to practice and you'll get there.
Sorry about the grammar and spelling ... just got home from a 12 hour road trip and at my age (73'), my old "Shovel Head" wears this old guy out...
If you want to airbrush, just to it. You don't need classes, as they can lock you in a box. You,re better off observing and gathering Tips and ideas from videos like this, and adapting them to work with your own art style.
Correct me if I'm wrong I'm an airbrush artist myself but didn't I just watch someone applying a decal or sticker to a tank.
As a Christian, I am really loving that a lot of the clients you're getting are getting a lot of Christian iconography on their tanks. Beautiful to see!
Thank you for watching
Amen!
This....❤❤❤
GORGEOUS work showing a prophecy yet to be fulfilled.
wow that's awesome 👍!! I use to paint cars and bikes. the money wasn't enough for me. I went into carpentry and after I really enjoyed the fresh air and sun . but I still did body work and painting. love your work!! I hit subscribe. today's painting is different from the early 80's.
looking forward for more of your work!!
ty for showing us what goes into your work.
Had my tins from my 2001 Heritage Springer painter here at Time Warp! Freaking incredible talented painter.
Right on
Dont'cha love it when the algorithms set you up right. Subscribed. Outstanding. Was a pleasure to watch. The video production/edit everything. Less talk, make it about the skill and the technique, perfect. Worth my time. This paint job is epic looking.
I love it. Torch flames.... 🔥
Much appreciated!
Hi, how do you make the Decals like the one you layed on the gas tank???
Clear waterside decal paper and a regular ink jet printer you can get the waterside paper here www.amazon.com/shop/timewarpcustompaint?ref=inf_pub_timewarpcustompaint
Have you got any that are 2+ years old that have been left in the sun?
I really want to know if the ink jet can withstand any sustained UV exposure
That finished tank is absolutely awesome,you done a fantastic job.👏👏👏👏👏👏👏
I appreciate you watching
Never painted a thing since like 1986; got a milk can I wanna pant with a decal of my favorite hubby's photo on it. Watched this video and now i have ideas but am so lost on how to even begin. But thank you for giving me the want to do it.
No problem thanks for watching
Really beautiful work I would like to know where you got that image cuz I'm been trying to find it on Amazon I can't find that image it is wicked
He doesn't answer those kind of Questions 100% that's why I unsubscribe
Google search images Dante‘s Inferno
I try to help 🤷♂️
@@redbaron2448 but you still watch his videos...🤔
@@jjhack3r Nope, Unsubscribe him 👍
What brand tape do you use ???
LiME LiNE www.amazon.com/shop/timewarpcustompaint?ref=inf_pub_timewarpcustompaint
the best tape in the world lime line
It says it in the video like 20-30 times lol
@@TimeWarpCustomPaint i only found a Website. But i dont found Beautiful Pictures to Transfer to my tank. For example the ship in your video
I am blown away by how good that looks. You are fantastic.
Thank you thanks for watching
Now THAT was AWESOME. Great job.
I love that image. I liked and subscribed for that in itself, but was also impressed by how gifted The LORD JESUS CHRIST made you in this. That taping and the artistic game plan for how to get the look is out of this world.
Yeah I wish Jesus liked me as much as you
He died for you, I would say he loves you!
@@georgecloss5644 What a sociopath.
Paint and supplies 👉www.amazon.com/shop/timewarpcustompaint?ref=inf_pub_timewarpcustompaint
The Impala in the back is cool. What is that thing?
Top
Damn. You have patience. I’m a car painter and I couldn’t imagine putting so much time in one small area. 🙌
I'm glad this is possible. But it is amazing that people used to just hand paint all the pictures
Fucking amazing!!! The gold really gave the image that antique look...really amazing work!!!
Thank you I appreciate you watching
Made it look so easy, great job it turned out beautiful.
Thanks for watching
Ghost flames. Amazing! Good lookin' '63 Impala.
holy shit, that looks sick
What a beautiful tank,anybody be proud to have one your tanks on their bike..
I watch these videos and sometimes I have have to question whether my eye's are deceiving me. Pure genius 👏 🙌
Thanks for watching
That was killer! I love that decal method you used on this tank.
Thank you I appreciate you watching
That paint tank looks amazing
Thank you 🙏 I appreciate you watching
I've used them temp. "Tattoos"....... Just put'em on over dry paint the usual way w/water....& let it dry then put clear lac. over it....The cheap buck store ones work great.
Always love seeing the talent that comes from my home state
Right on man I appreciate you watching in
That was a beautiful job. Lot of work . Befitting picture to have on a death machine, beings all the crazies on the road these days.
Thank you I appreciate you watching
Awesome job! I love the details and time taken to turn it into priceless
art!
Thanks for watching
Seu trabalho é magnífico mano! Parabéns...
Daaaang!!👍👍👍🙏
That's so amazing!! The time and patience to complete that type of work. Takes a person with a gift.
Thank you I appreciate you watching in
Maravilla de trabajo..., Felicitaciones.., saludos desde Montevideo Uruguay... 👏👏👏👏👏👏👏
Excellent great choice of colors.And the way the flames were accomplished.
just that they dont show. everything else perfect
Thanks for watching
Absolutely unbelievably awesome cool ideas. Really fun to watch your movies with great tips. You're awesome. Thanks, Chris 🇸🇪
Thanks t
I like it. Can I work?
I like the idea of using tape for pinstripes, You are a Truly Talented Individual Thanks for sharing.. Much RESPECT from Spokane Wa!
Trust me I get a lot of grief over it. Thanks for watching
What is there left to say I'm speechless..absolutely AMAZING.....TOP NOTCH.....WOW!!!!!!!!!!!!!
I am rarely jealous of other people. But today I am jealous of 2 people. The person with the skills to create that piece of art work. And the person that now owns that piece of art work. FKN Amazing!!!
That's incredible, great job!
Thank you very much!
Beautiful work!
I really love that picture on that tank that's beautiful man that's what I'm talking about
Thanks for watching
I used to custom paint in the early 80s we used house of color, candies lots and lots of masking and un masking and clearcoat.i don't think it paid near enough but was Satisfying when it was finished, like out the door
Awesome thank you for sharing
Unbelievable your are an art specialist, so great, I have never seen something like this, beautiful 👍
Thanks I appreciate the support
Love love love. Awesome bro. I’m started following you to learn and custom my bike tank. I do airbrush on custom leather. After watched your videos and materials list you posted, make easier. Thank you so much and keep up with your talents and skills. 👏👏👏👏👏
Right on!
Wooooow, master I am not worthy. Really a great custom paint job, that should be in a wall.
Thanks for watching!!
Beautiful work ! I love painting !
Me too thanks for watching
Una auténtica obra de arte. Mis respetos. BRUTAL ✌😍👍
Another Incredible paint job from Time Warp🤙 I can’t wait to try this
Thank you thanks for watching
That transfer saved hours of airbrushing 👍
I personally couldn’t airbrush that much detail anyway. 🤷♂️
@@TimeWarpCustomPaint Would certainly be a challenge - and costly for a client!
Great skills. Great camera work. The choice of music is what keeps me from LIKING or SUBSCRIBING.
Beautifully executed custom paint work and video!
Thank you I appreciate you watching my
its always good to be a perfectionist bc everything turns out perfect, lol!!
Fact 🙌
A lot of skill and technique required. No wonder paint jobs are so expensive. One of a kind work of art. Turned out sharp
Thanks I appreciate the support
Wow amazing work I really like the water transfer , I gotta try that 👍🏼
Great idea...wow!
This looks incredible!
Magnifique travail,bravo à vous
Manoooo, muito lindoooooo.
Parabéns, vc é um profissional de ponta mesmo . Um trabalho desse deve ser mais caro que minha humilde moto kkkk mais uma verdadeira obra de arte , parabéns
Wow! That’s art! Beautiful work man!
God has blessed you with patience and skills, wonder job I enjoyed watching.
Looking great!
Dude you're a Genius
Thanks for watching
That was amazing!!...
Beard tank you gave me some good ideas i could run with
Just amazing and you make it look so easy !!
Thank you thanks for watching
Man I'd be afraid to put it on my bike. It's so beautiful, job well done I love it man. You are an artist.
I really appreciate that
Wow... awesome background music. Hero.
Wow! Awesome Talent!
Love the red pin striping. It sets the rest of the job off. Great work!
Thanks! most complain about it. I like it too
@@TimeWarpCustomPaint The only comment that matters is the owner of the bike it went on. If they loved it and padded your pocket a bit then your your work was spot on. Eff the rest.
That is just AWESOOOOOOOME!!!
Thank you I appreciate you watching
You are very skilled. Very talented. Me? No way. No how could I EVER do that. Beautiful tank you created there. VERY MUCH a tank to be proud of.
Thank you I appreciate y
You da man Adam! Gonna give it a whirl...
Wonderful work and explains the process. Awesomeness
Thank you I appreciate you
Wow! What a process and so beautiful. Pure art my friend! Outstanding job!
Wow. I wish I had that talent! Beautiful!
ABSOLUTELY AMAZING !!
Now that's TALENT
I appreciate that thanks for watching
God bless you and your hands ... beautiful work
Thanks for watching!!
Unbelievable work. Skilled artist for sure
I appreciate that thanks for watching
I love how it looks like a skull from a distance
That’s true. Yes, that’s awesome.
That tank turned out badass nice work 👍 keep posting these awesome videos
Thank you
That's beautiful!
Unreal!! Amazing work!