thx! the motor is 24v, but for torque I don't really know, because there's no spec for this. but its really capable to run perfectly and get warm after 2hour usage.
it's a car flange couple, using a bolt to mount it. I make a thread on here, please do a visit. www.xsimulator.net/community/threads/building-my-first-diy-wheel-and-2dof-motion-project.16774/
Sir can you tell me what these 2 engines are and tell me if I can make this emulator like it where can I find the files, the reference source to make them😊
Did you complete this and possibly upgrade the motors? I am inthe procecess for building one and deciding on where to but the motor mounts. I like that you are farther away from the pivot point, i feel l;ike it would get more torque
yes, I complete this and add another motor for traction loss. nope, I don't think I'll change the motor, because its torque and speed is enough for me, no issues whatsoever for 2years. and yes, that's the point, you have to make sure the pivot point is far enough to get more torque and less burden to your motor. please subs and check my another video for the upgraded system. here my traction loss update. czcams.com/users/shortskJZJubpfaHw?feature=share
any suggestion or link for download the software that use together with ur board? would be really grateful if you can share a measurement of aluminium part. btw really wonderful and good-looking work cheers.
Thanks for the compliment. Thats a initial design and I'm afraid I lost my design plan. But I'll try to looking for the existing design plan. You can email me, and I'll send you my design
hi. thank you! I use a flange joint for a car for the Ujoint, you can read my building progress here. www.xsimulator.net/community/threads/building-my-first-diy-wheel-and-2dof-motion-project.16774/
nope, but I can share it to you. You have to install Maycad program to opened it. drive.google.com/drive/folders/17hTA1_mV8dpnmt7AYuszwl0qDGS7F96s?usp=drive_link
It's wiper motor type, but for wire feeding machines. Its bigger, had More torque and speed. Btw, its not that precise when heavyweight is being loaded. So I had to cut down the CTC lever from 80mm to 40mm. (on the video is early build using 80mm ctc lever)
@@om_is_hobby ah yeah, I am using wheelchair motors and have the same problem. You can use bungee cords to keep some pressure down on the arms to helps some. I have seen ballscrew gearboxes that have nearly zero backlash, DOF Reality SFU gearbox, but they are pricey and probably hard to mount to a motor
@@deadlydonague2402 yes this type of gearbox is really suffering from backlash. The bungee cord, not helping much, I had it before. In near future I want to try using a smoothing damper just like dof reality. To keep it on budget, I'll use some steering damper for motorcycle.
@@om_is_hobby yeah the bungee only helps a little for slow movement, any quick movement and the bungee cord does nothing. Dampers would be good, but I think there will still be that “clunk” when you switch from one side to the other, but the movement should be more smooth
@@RobBob555 actually I already answered it. It is "DC Motor Wire Feeding Mechanism", just Googled that bro. Or put that keywords into your marketplace website like aliexpress or Amazon
Mas sebenernya bikin ginian belajarnya pada dimana sih😁, saya heran ilmunya di dapet dri mana? Soalnya sayamau blajar coba bikin yg 4 doff mau di konekin ke rc.
Ke xsimulator.net aja mas. Semua ilmu dan software nya ada disitu. Kalo ga salah udh ada yg buat jg motion konek ke rc. Bisa juga dpt lisensi gratis. Ada video saya juga bahas soal itu.
@@om_is_hobby makasih bang, itu bayar gk mas, iya sya mau ikut2an channel CLOUDRC hardwarenya pke raspi4 tpi belum nemu ttg motion chairnya, judul video pembahasannya apa mau ta tonton?
@@om_is_hobby Sir can you tell me what these 2 engines are and tell me if I can make this emulator like it where can I find the files, the reference source to make them😊
@@om_is_hobby thanks sir, I understand you do this from an idea in your head, so do I. only I know the 24v motor and other components I don't know the name to buy them on the electronic platforms, do you mind if you can tell me the name of the components such as power supply or some screws for example?🥰
Great Job Fellow! U are a genious!
Incredible! What is the voltage and torque with gearbox on those motors?
thx! the motor is 24v, but for torque I don't really know, because there's no spec for this. but its really capable to run perfectly and get warm after 2hour usage.
Very cool! Thanks for the response!
Hey, what kind of U joint did you use and how'd you mount it to the profile aluminum?
it's a car flange couple, using a bolt to mount it. I make a thread on here, please do a visit. www.xsimulator.net/community/threads/building-my-first-diy-wheel-and-2dof-motion-project.16774/
Sir can you tell me what these 2 engines are and tell me if I can make this emulator like it where can I find the files, the reference source to make them😊
Did you complete this and possibly upgrade the motors? I am inthe procecess for building one and deciding on where to but the motor mounts. I like that you are farther away from the pivot point, i feel l;ike it would get more torque
yes, I complete this and add another motor for traction loss. nope, I don't think I'll change the motor, because its torque and speed is enough for me, no issues whatsoever for 2years. and yes, that's the point, you have to make sure the pivot point is far enough to get more torque and less burden to your motor. please subs and check my another video for the upgraded system.
here my traction loss update.
czcams.com/users/shortskJZJubpfaHw?feature=share
Looks amazing . I really want someone to build the cool 360 racing rig
360 is gonna be lit, but don't know how to achieve that. especially for the cable
can anyone tell me what the name of the metal frame is made out of and where to get some. i cant find anything online except fully built rigs.
it's aluminum profiles. there's a lot type of it. on branded rig, it use a 4080 size.
any suggestion or link for download the software that use together with ur board? would be really grateful if you can share a measurement of aluminium part. btw really wonderful and good-looking work cheers.
Here you go bro.
Every necessary information is here.
www.xsimulator.net/community/threads/smc3-arduino-3dof-motor-driver-and-windows-utilities.4957/
Thanks for the compliment.
Thats a initial design and I'm afraid I lost my design plan. But I'll try to looking for the existing design plan. You can email me, and I'll send you my design
@@om_is_hobbyI would love a copy of this.
@@XxBoxerman74xX go for it!
@@om_is_hobby how do I email you?
Can you link or explain your Ujoint setup please? Awesome work!
hi. thank you! I use a flange joint for a car for the Ujoint, you can read my building progress here.
www.xsimulator.net/community/threads/building-my-first-diy-wheel-and-2dof-motion-project.16774/
what potensiometer you use?
Only the cheap one. Potensiometer mono 10k
Hi, I've been looking for plans for the actual framework, do you have this.
hello there. I have my final plan here. you can opened it with "mayCad" software.
terabox.com/s/19WpGX4wuFkm_XBh_DokB6g
Do you sell plans for this?
nope, but I can share it to you. You have to install Maycad program to opened it.
drive.google.com/drive/folders/17hTA1_mV8dpnmt7AYuszwl0qDGS7F96s?usp=drive_link
Whats the cost of the aluminum in the vid?
around 120$ for complete rig. on the video its not complete, so maybe less than that.
can you make a video on building the whole thing?
Unfortunately I am not able to do it. I'm not documented every step that I do. Sorry.
What type of gearbox is that? Seems to be very little backlash or slop, very precise
It's wiper motor type, but for wire feeding machines. Its bigger, had More torque and speed. Btw, its not that precise when heavyweight is being loaded. So I had to cut down the CTC lever from 80mm to 40mm. (on the video is early build using 80mm ctc lever)
@@om_is_hobby ah yeah, I am using wheelchair motors and have the same problem. You can use bungee cords to keep some pressure down on the arms to helps some. I have seen ballscrew gearboxes that have nearly zero backlash, DOF Reality SFU gearbox, but they are pricey and probably hard to mount to a motor
@@deadlydonague2402 yes this type of gearbox is really suffering from backlash. The bungee cord, not helping much, I had it before. In near future I want to try using a smoothing damper just like dof reality. To keep it on budget, I'll use some steering damper for motorcycle.
@@deadlydonague2402 and don't forget to like and subs bro. 😉
@@om_is_hobby yeah the bungee only helps a little for slow movement, any quick movement and the bungee cord does nothing. Dampers would be good, but I think there will still be that “clunk” when you switch from one side to the other, but the movement should be more smooth
What is the driver?
I use Bts7960 motor driver.
@@om_is_hobby What is the game operating system?
@@Laito_1717 its Simtools
How make that software?
@@Ukill I don't, I use a existing software, it called simtools. You can goggle it.
@@om_is_hobby thank you so much now i can build my custom 4axis motion simulator!!
Were can I get that please
I build my self..
what motors and driver do you use?
I use a Dc Motor Wire Feeding Mechanism and BTS7960 43A driver motor
@@om_is_hobby you never answered..Which Motors ??
@@RobBob555 actually I already answered it. It is "DC Motor Wire Feeding Mechanism", just Googled that bro. Or put that keywords into your marketplace website like aliexpress or Amazon
How much have you spent?
about 300bucks
did you have the link to buy the motor?...i dont have any idea where to buy it
I buy it locally in my country. Its a second hand part. But you can search it in Google with keywords "dc motor 24vdc wire feed mechanism"
@@om_is_hobby i see...thanks for answering
@@aqmalazizie6136 glad it helps
@@om_is_hobby sorry for asking..one more thing is what size is the aluminium profile you use?
@@aqmalazizie6136 I mix a 3030 and 3060. For my weight its a bit flex but enough.
Slm motors. Wipers 12v
Its wire feeder motor 24v
А 6DOF не будешь делать?
just 2DOF for now. (просто 2DOF пока ) sorry using google translate.
Do you have your project steps
Hi, sorry I don't follow what you mean. do you mean a tutorial step by step?
@muh.ismail yes, please
@@waelbadr4724 I'm so sorry I don't have it. If you want a step by step tutorial, you must visit D-max channel. I learn a lot from his videos
Could you please send me link?
@@waelbadr4724 just type in D-max motion simulator, and you'll find the channel
pengen yg begini abis berapa ya?
tergantung, krn ini DIY jd tergantung bahan2 yg dipake om. bisa luas rentangnya dari 5 - 15 jt an
bakal jual ga gan😬 kalau iya estimasi brp?
wahh ngga gan, utk pribadi aja. 😁
gan kalo misalnya berminat sebenarnya ada tuh yg jual di tokopedia, search aja motion simulator. itu temen2 sy jg di forum DIY sim racing indonesia.
@@om_is_hobby makasih gan infonya, tapi ini banyak banget 😅, boleh tau nama tokonya?
@@friza16 yg nama tokonya
"siluman's motion dynamic" atau
"ATERI Store", tergantung selera dan budget hehe
@@om_is_hobby makasih banyak gan! 😁
Mas sebenernya bikin ginian belajarnya pada dimana sih😁, saya heran ilmunya di dapet dri mana?
Soalnya sayamau blajar coba bikin yg 4 doff mau di konekin ke rc.
Ke xsimulator.net aja mas. Semua ilmu dan software nya ada disitu. Kalo ga salah udh ada yg buat jg motion konek ke rc. Bisa juga dpt lisensi gratis. Ada video saya juga bahas soal itu.
@@om_is_hobby mana link/judul video pembahasnnya bang? Saya mau nonton
@@om_is_hobby makasih bang, itu bayar gk mas, iya sya mau ikut2an channel CLOUDRC hardwarenya pke raspi4 tpi belum nemu ttg motion chairnya, judul video pembahasannya apa mau ta tonton?
@@Rotoboxing itu forum, belum tentu ada video, jd diskusi aja, harus Pelan2 baca tutorialnya. Saya lupa nama threadnya, tapi saya yakin ada disana.
@@om_is_hobby maksudnya mana video abangnya yg bahas soal itu? Saya kepo.
Btw thanks bang replynya, ane udah subs.
ta show
Pakai motor apa mas?
Cari aja di google "motor 24v wire feeding mechanism" saya pake itu mas.
@@om_is_hobby Sir can you tell me what these 2 engines are and tell me if I can make this emulator like it where can I find the files, the reference source to make them😊
@@rumbletorncopper4478 hello, as I stated in my previous chat, it is 24v motor wire feeder.
As for the source, you can find it at xsimulator.net
@@om_is_hobby thanks sir, I understand you do this from an idea in your head, so do I. only I know the 24v motor and other components I don't know the name to buy them on the electronic platforms, do you mind if you can tell me the name of the components such as power supply or some screws for example?🥰
Habis berapa mas buatnya
4-6jt, tergantung bahan2nya mas. Plkalau bs dpt part second lebih murah.