Bike Bogs and engine cuts off while accelerate? | Float adjust in carburetor
Vložit
- čas přidán 27. 07. 2021
- Music used-
--------------------------------------------------------------------------------------------------------
dizzy by Joakim Karud / joakimkarud
Music promoted by Audio Library • Dizzy - Joakim Karud (...
--------------------------------------------------------------------------------------------------------
#bike #bogging #solved #motorcycle #motorized #bogs #vehicle #car #bikes #solution #problem #when #riding #idle #idling #choke #runs #only #on #discover #discover125 #disvocer100 #platina #cd100 #plusar #ns # royal #enfield #harley #davidson #model #make #chassis #engine #indise #noise #chain #lube #lubrication #clean #process #howto
#simple #step #biker #moto #motoladpavan #motolad #motovlog #Pavan #kumar #hb #pavankumarhb #application #america #london #baiden #joe #latina #paris #denmark #poland #australia #compare #compilation #pranks #latest #trendy #trend #India #motorcycles #race #drag #lamborgini #bmw #remove #easily #broken #asmr #full #youtube #facebook #instagram #hike #wechat #whatsapp #trick #tricks #tips #apple #bigbillionday #yamaha #suzuki #porsche #mustang #bulletbike #harleydavidson #launched #videos #clutch #cable #tyre #tire #replacement #oil #change #repair #guruji #baba #memes #meme #funny #brake #blow #psi #pillion #seat #adjustment #wash #upcoming #technology #uploads #movies #short #below #film #host #bikers #headlight #indicator #service #guide #pavankumar #bellary #ballari #karnataka #monaco #dubai #lana #china #trip #blogs - Auta a dopravní prostředky
If only all these bike self help videos were as simple and well made as this one! Thank you
You're welcome!
Excellent video! My bike stopped running 10 kilometres from my home! Thanks to you I was able to take a bus home, get my tools, go back and take the carburetor apart, immediately notice the float angle was off, adjust it, checked but no blocked needles and put it back together and rode the bike home!!! Simple and direct with excellent explanation of how to adjust the float!
honestly the best video I've seen on the topic so far good clear camera angles and a clear demonstration of the symptoms good job.
I met Indian people all over the world and yall are the next world champions of evrything cheer to you bro
Going for your ", I'm not a racist" verification and certification are we? Well bravo too you good them! It's great to see individuals trying to pretendeven though they can never win.im submitting your post to the I.N.R.I.W.P
@Nemesistyx please come again, everyone deserves a second third or forth chance. Please call back between 11:00 and 11:45 local times
I am from Iraq. Your method of explanation is simple and beautiful. The best thing you did is that you explained the problem practically and tried to operate it after the end of the maintenance. Thank you.
I now have respect for this man
Hi sir, much obliged with your comment☺.
@@PavanKumarHB respect!
Thank you
Yea man thank u .
Thank you, my brother. My bike is working properly now. Greetings to you. I benefited a lot from the video
Thanks man... From Nigeria, was really helpful just fixed my bike now...
I just finished a mile rebuild on a 1980 Suzuki GS850 - installed new float needles/housing/floats - followed the service manual and set the float heights to 22mm - (manual says 22.4 +/- 1mm). it runs fine unless you try to rapidly accelerate. It will bog down under a heavy throttle twist. It may be running lean and so I may need to re adjust the floats up (down rather) 1-2MM. so it will allow MORE fuel into the bowl.
This is very helpful. Much appreciated!
Hi Elijah, thanks for taking time to write the feedback☺.
Thanks a lot - will try on my bike.. This problem was making me crazy.. good that i got this video.. Thanks again
Your video really helped me alot will love to see more later on
Hope this method helped you to the fullest. I'll be brining many videos this year.
top video just saved my way of income and un heathy mechanic bill , big love brother keep it up =)
Hi Rodney, most of the mechanics don't go deep into the problem because they want to move bikes out soon and want to bring new bikes for services so they can make more money.
Thanks for spending your valuable time to write this comment🤗
@@PavanKumarHB agreed
Thank you!! Bike is up and running thanks to you!
It's so usefull to me bro ❤️ thnks you so much
Man you save my day…RE Classic 350 2011
Wil try this. If it works. You are my new hero. Thanks.
Lots of cussing didn't help but your awesome video did help . Thank You . 🙏🏻
Thank you sir
Excellent💯👍. Well explained.
nice explanation man 💜 thanks a lot
My pleasure
It helped 😊 Thanks for the information...👍
Hi Rohit Chopra, much appreciated your feedback☺
Very clearly explained! thank you for sharing your knowledge so others can benefit. My motorcycle may be having this problem. I will give it a try.
Hi Raul, let me know is you need more help on your bike problem.
Thanks for writing comment☺
Thanks bro, valid information.
Hi Sir, thanks for the feedback☺
Good video.. It helped me fix my wego scooter
Hi Adarsh, that's amazing to know☺
Excellent help thanks 🙏
thank you for clear explanation
Hi sir, much appreciated your comment☺
thanks, will try in my bike.. i too have samee problem. Thanks again for sharing
Hi Sir, thank you
Wowo super bro you tell good tips ❤️❤️❤️❤️
Hi Sree, much appreciated your unmatchable support to my channel🤗
Thank you bro very useful
Hi AJ sir, much appreciated your feedback🤗
Thanks man your are amazing
Most helpful thanks
Thanks man good info
Appreciate your feedback Max 🙂.
Thanks a million.
That was my problem thanks 🎉
Nice video 😊👍
Hi venkat sir, that's the best compliment🤗 keep watching
Thanks bro it's work for me
Hi Lung, that's very cool to hear☺.
Respect ❤
Thanks buddy, same problem in my bike. I will try your method.
Hi A J, after trying this, if you still have any problem left, then let me know we will fix it.
@@PavanKumarHB ok
@@PavanKumarHB Thanks brother 90% problem is solved using your technique. My bike is Bajaj Caliber 115, 2004 model.
Im running on 1 cylinder because my float arm broke off so its hanging a little off, is this why? not getting fuel in front bowl because of it?
Good job brother
Thank you😇
Good video sir
Thanks
Well explained
Hi PDL, much appreciated your comment🤗
Beside my new Apollo RFZ bogging when giving it more than 1/2 throttle it recently bogged so much that it died on me u had to walk a little at retry it and it worked and then it died then it started up when I got back but keeps bogging should this be the issue? Should I adjust the c clip on the throttle needle so it gives it more gas? Thanks 👍🏽
Superb bro 👍
Thank you Saravanaa sir.
Good will check after setting
As i understand the metal tang adjuster on the float bowl barely touches the float valve button so its not loose or not compressed then when there's fuel the float bowl adjust in the right position
Ty
Today I went into a deep hole and bike is doing that the same issue thanks for the video
Hi David, that's great to hear. I'm so happy that my video helped you☺.
That's what it is thank you
Hi Peter, much appreciated your comment☺
Thanks brother 🙏
Hi Sir, thanks for watching the video and giving feedback🙂.
Thanks bro
Welcome
I know this is an older vid. Maybe you still check it ?
Mine floods out. It runs good in mid and top end and idles good too, but when I sometimes begin to accerate- it bogs and then the float bowl floods. It's very touchy when it does that and then it just will not start.
I never have to use the choke on it either- it usually just starts right up. Can it be that the choke is stuck ?
Hi, I'm active with comments. Check for the cause of blockage within the carburettor internal unit. Also check the butterfly valve opening and closing mechanism.
Thanks ❤️💯
Hi Russel, much obliged☺
Good trick
Good video man, but what were you doing day 1 and 2? 😁
Hi Louv, on the first two days I kept staring until engine is ok with moving forward.
On a 03 KTM 450 after complete top end rebuild , cylinder re sleeve, new piston & new titanium valves and new adjustable accelerator pump with every thing tuned and running perfect. one day after a few months my muffler started melting my side plastic muffler cover, then a few days later the bike starts to lose power at higher RPM. Any ideas ?
Thanks for any help on this.
Carb is KEIHIN FCR-MX 39
Carb jets stock 170-40, in shop book 175-48
Jets In as of 03-22 - 178/50
Hi sir, this may be due to titanium valves which creates enormous heat within the combustion chamber.
But this needs to be investigated to come to any conclusions because the engine is completely rebuild.
Titanium valves are made for high end racing engines for high rpm during race. They need huge maintenance and inspection on timely basis else engine may get siege.
There's more to these carburators than the float. The needle and seat are a big factor when the needle wears out it will overflow into the air box like it did mine.the seat was worn so it was new carburator time. I'm not getting into anymore check out the other videos. 👊👏😀
Thank you
I was checking my carb and notice that the float pin actuator was pitted causing the needle to stall and sometimes stick. I took some 600 gran sand paper and cleaned it up. Works fine now.
Hi sir, that's good to hear ☺ I would recommend to replace the needle if possible. Since it plays a major role in performance.
Thank you،My bike has the same problem. I will apply your method and give you the results tomorrow, God willing .I hope the method is suitable for my bike ❤️
It's 1month ago you still ddnt give feedback
good job
Hi Abu Bakar Siddique Sabbir, thank you☺
question. When the float is up ? When the float is down ? Dose the gas stop flowing????
Please watch the complete video without skipping.
Is this a possible solution to a delayed throttle response??
WHERE DO YOU GET THESE MAIN JETS ?
and to correctly adjust the height of the float of the Bajaj carburettor pulsar 180 ??
Hi, you can follow the same procedure for Bajaj pulsar 180 also. No change in technique, this method is for all bikes with Carburetor.
I'm really surprised it didn't fix itself between days 1 and 3, must be one of those mail order bikes!
Hi, in my bike R15 v1, i have the problem of power loss while raise sudden acceleration. Please tell me one solution to it. Its fuel injection type engine.
Thank you
Hi Riadh, thanks for watching the video☺
It worked
Question for, Im helping a friend with a polaris 500 predator carburetor issue, the initial complaint was only start and run on choke, would not accelerate but stumble flat out upon trying to increase rpm. He brought the carburetor to me, I opened it up found a plugged main jet and slightly plugged pilot jet / emulsion tube, all clean now and reinstalled, now it will start on choke and idle off of choke but as soon as you try to accelerate it stumbles flat , the diaphragm slide does move up but kind of bounces as it stumbles to rev up... What is going on here, no vacuum leaks on the intake boot either...
That’s exactly what my Suzuki fa50 does. I took the carburetor apart and ran it through a sonic cleaner and it ran fine on half throttle for a few days before it quit working again. I just ordered a new float online hopefully that helps
Hi Austin, did you perform the float adjustment and float is good?
would u plz tell me which bike,s carburator is this.. That u had open
Hi sir, this is my discover 125 BS 4 model bike.
Why you did not key start it this time? As you did at the start? I am thinking it is two different bikes
The first video was taken long back and when I got more questions on morning start I used that old video at starting and made new video on solution.
First video is when the battery life is full, end of video is when I made 2 years after at that time the battery is dead
I own Platina exhaustec 2006 model
When I start the engine and give slight throttle, it boggs and when I use the choke also it boggs, usually in other bikes when choke is used rpm raises, here it turns off.
I've a confusion in finding out the culprit whether the pilot jet or the float.
You solved it?!!
Plzz reply
Hi Joseph, choke doesn't have any connections with pilot or main jets. Choke pipe is different.
You check the needle position and the passageway of Carburetor to engine compartment. If it's cracked or leaking then replace it.
@@PavanKumarHB which needle? 'needle jet' or the 'float needle'
@@JosephJeffrey watch my video on needle - czcams.com/video/EIWmRK5VJNw/video.html
If thid problem happen in fi bike then what to do?😊
Nice video bro.....
Rtr 180 when starting it will start in Idle but when giving throttle the rpm will not increase.,... suddenly rpm will increase and decrease.
But after bike is hot, then it work properly. ...
What to do?
Hi sir, check the accelerator Freeplay and Carburetor needle shimming techniques.
Other cause will be from using different engine oil other than manufacturer recommended.
@@PavanKumarHB thank you, i will check that.
@@powerentertainment719r problem solved? i have pulsar 150 2014 model and i use motul 20W50 rather than bajaj 20W50 sams issue with me 😐 i already changed carburettor almost 1 year
Will the same work on a twin carb on a v twin engine?
Yes, definitely works if the float is aligned correctly.
I've got a hyosung Aquila gv250. Carbs are perfectly clean and jets are clear. It dies wen I give throttle unless I spray the carbs, then it revs normal. I noticed one float is higher than the other float just barely. The fact that one is high and one is lower makes me think my issue is floats are out of adjustment.
Hi Shane, I see this could be due to non flow of gas through the carb. Also you need to check the butterfly valve and how much it's opening. Adjust needle of required. Check my playlist in it I have uploaded much more videos regarding bogging issues.
Hello brother! I can not seem to find the other videos on boggs. Can you tell me the name of them please?
@@shanemyers4142 check one of my other video on bogging - czcams.com/video/EIWmRK5VJNw/video.html
But why this happens in new carburettor 🥲. Fitted pulsar 180 carburettor in fz 16. First day it was running fine
Hi Melvin, fz carb operating method will be different. It's not a good idea to interchange the mechanical parts because this will cause major issues in future.
"Float should be touching the float needle". Where exactly is that needle, in that fuel input hole or hanging out ? Should zoom in and explain. 00:54.
Noted your point.
And the needle situated at the tip of the float, in this video you can see where I did bend the portion and that's attached to some pin and it's the float needle.
Yah me also facing this problem... Mechanic said to replace the carburettor....
Hi Abishek, don't believe mechanic, it got nothing to do with new carburettor until there is defect in carburettor or is damaged physically.
Try to find the problem using water using straw to check the jets are working properly.
Bike jerks at low speed and good at idle at top end what is the issue
TVs Wego engine stops after climbing down. What could be the reason?
Hi Pristine, yes this happens with gear bikes too. This is because the engine itself runs without giving the throttle at this time with high compression and when the climbing ends, the compression suddenly drops which causes the engine to stop.
To avoid this we turn off engine while climbing down.
👌🏽👌🏽
Someone is selling a near perfect motorcycle for 900 near me because this is the only issue they have had and they are a new rider. Gunna buy it and tune it as good as possible
That's really good to know.
Mine dies on quick trottel. What should I do?
Hi Nutu, please check the carburetor main jet is getting enough fuel to pump it to combustion chamber or not.
Mostly the fuel is not getting pumped to combustion chamber when the throttle is raised.
Same prob facing in gixxer
When the bike was cutting out was there a loud click noise as it died?
No, there's no loud noise at last phase.
Rotate mixture screw on right
Bro i have discover dts si and after the bike cools down it starts but the race does not picks after 2 to 3 minutes it slowly stars up please say solution for it😢
Clean airfilter. Adjust tappet valve clearance by yourself. Also there are many reasons, you can send video to my Instagram with problems you're facing.
When I accelerate on my quad it struggles to go and make a little.pop noise what can I do to fix it?
Check the passageway between carb and engine for any vaccum leaks.
Sometimes the CDI unit might be the problem or rectifier. If both of these are good then check for clog with pilot jet. If issue still persists then adjust butterfly valve needle in carb head.
All the solution videos were already uploaded in my channel last year. Check them.
Do you have a compression test video
No Shane.
Thanks so much I was about to buy a new Carburetor
Hi Sir, that's good to hear that you have given new life to your old Carburetor😃
I'm having this problem in Splendor pro..
But this problem will happen in every morning only or In too cold condition.......
Hi Sudhir, this problem shows up - when the bike is stalled for more than 1 week and in rainy conditions and in winter cold condition, especially between 3 AM and 9 AM.
@@PavanKumarHB it happens every morning
So I think this is normal problem or should I check with service mechanic ?
You tried this method? If yes then - 1) first check the tappet valve clearance 2) change engine oil recommend by your manufacturer(don't use other engine oil, use oil mentioned in service manual 3) check health of igniter/spark plug.
@@PavanKumarHB tappett is all right and oil is of recommended oil only and Spark plug I changed 1 month ago just rode 250 kms till now...but also it giving morning start problem 🥴
This is very rear problem. This need to be checked with trusted mechanic whether he is from authorized service center or from local shop.
Take it to trusted service man and I recommend to stay with mechanic and know why this is happening daily.
Bhai agar new flot install Keya to thik hong problem
Na, new float kuch nahi karskty. Adjustment nahi hy tho new float lagane sy kaam nahi pura hoga.
Hey..
My engine starts in only one kick without any problem on chock and normally alsoo but when i accelerate a little bit also it cuts off.....
I'm not able to identify the problem... Recently i have changed my bike carbourator so I'm confused that it is the problem in carb or in something else
Hi Viahva, did you adjust the needle at the piston? I have video of it in my playlist you can try it.
How to fix same issue with fuel pump and injector bike ..my R15 old model
Fuel injectors have different mechanism, try to open the injectors and clean and check for any clog.
Hi bro my bike apache rtr 200 some time s powerdrops jerk while running or acceleration
Hi Hari, 1)clean the air filter 2) check Carburetor main jet for any dust inside of it. 3) replace engine oil, only use the manufacturer recommended grade and brand. 4) check rectifier and a medium sized capacitor connected to it for any faulty. 5) check spark plug life
When I turn on my minibike it full throttles how do I fix that
Hi sir, in this case you need to check if the throttle cable is tight and also the idle screw on your bike. If it's tight then loosen the idle screw until it gets to 1000-1200 rpm.
I have similar issue but my bike does not shut off it will ride but I dnt get enough power to go fast as soon as I move off I have to change gear or it stuck at one slow speed however If i ride very slowly I dnt have an issue at all . Any suggestions?
Hi, I have experienced this when I used castrol power engine oil for my bike which is other than the oil mentioned in my bike manual.
I always recommend you to use only manufacturer recommend engine oil.
This is also caused when your oil is old and tappet clearance is not correct.
Also check for clutch plates, they may have worn out and resulting in low Power.
I checked a guy about it he tried everything we knew nothing works , till he plugged off the gear coil (the one that sends the display to display screen ) then it started working fine he then played around with it a little reconnect it and it start working fine , I dnt even have a clue what he did ( now the LED clock starts to malfunction) kmt headache.
i have the same issue, what did you do to fix this?
Hi Grizz, I detected that the float is not placed in right way and adjusted it in such a way that the pilot jet gets enough fuel to move the bike ahead when we ride.
My bike starts first kick and rides but then bogs down can someone help
Why did he have electric start before cleaning the carburetor and have a kick start after??
Because the electric start video was taken when the bike was 6 months old but the kick start video made after 4 years from that electric start day. Since many questions raised on this issue I collected beginning video and found solution for it.
Same thing happened with me but in scooty what should i do brother?
Edit:please help
Try this method, Scooty Carburetor will be slightly different from bike but same mechanism.
Hello bro. U explained very well. I have same issue for Suzuki samurai bike. It would go arround 4-5 km slowly the bike doesn't get enough of power or something. It will jerk like something and gets off. After few minutes it will start again and same problem jerking. I'm so much disappointed as spent enough money for this on mechanic. Everytime they do wiring all that stuff and loot me. I feel like crying wen money is paid work is not done.
Is ur method applicable for Suzuki samurai of my bike bogging problem.
Please reply bro i have subscribed you.
Hi Vickky sir, please share few details of your bike:
1. What's the Carburetor tuning set for? I mean how many outward turns?
2. When the tappet setting done last time?
3. You do fill more fuel in bike or it'll be under 1 liter?
Definitely we will fix this problem without spending any more money.
Hello sir.
Regarding bike details.
I did some turns for carborater watching CZcams later given to mechanic 2 days ago.
I don't know wt is tappet, if it's carborater cleaning then mechanic said it's done.
I fill like 1-1\2 litre with 2t oil 30ml for litre
How old is the battery? And please test the CDI unit from local service center. Mostly problem might be there with it.
@@PavanKumarHB thank u for the reply. The bike is almost dead and i gave up.
With little try we can give new life to your bike.
Bro carburettor piston neddle having 5 threads in which place lock should be present..some saying lock at 3rd place from top
Hi Sree, I'll be uploading needle adjustment video in the next month with complete explanation.
@@PavanKumarHB thnks bro ❤️❤️❤️❤️