Blown amp, welded door and setting gains
Vložit
- čas přidán 11. 09. 2024
- Help support the channel by using my link when shopping at Down 4 Sound
lddy.no/1gov5
Big Jeff Audio affiliate link
bigjeffaudio.c...
JAL official Merchandise
www.audioteama...
My Amazon link to the products that I find helpful and useful
www.amazon.com...
All my social media links
heylink.me/Jer...
js-alternators...
Use code JAL-JS23 to save $$
My Affiliate link for LF Audio
lf-audio.com/j...
DJ Dirty Bass save money with code
AINTLOUD
High quality LED Lights
redeemedled.net/ Code JAL10 to save $$
Thanks Jerry for setting my gains. I had a blast hanging out with you Debbie and Duston at the shop. Fun times
Always bro.
mount them fans in some foam that fits the window opening and paint it black. roll the window down and put fans in and roll the window up. with it sealed they should pull more air.
Cover the windshield!
That’s what I’ve been doing lately. Money tight so I’ve been using stuff that I have around the house. I was stressing over buying tweeters when I had 2 pairs sitting here. Made some rings so that they’ll fit and now I’m happy. They’re still temporary but at least I got some
Yay I got a indirect shout out lol😂 can wait to meet yall
When u welded the brace u popped that apocalypse amp you got to disconnect the battery from everything when welding buddy
Nope It was acting up when I pulled in
Take a torch and heat up the end of the cables and slap a dab of solder on the ends to keep the wire on the weed eater from fraying/un-winding brotherman
Jerry found Towelie. Oh no poor Apocalypse amp. Sweet Jerry got more tire shine. HI MR BIGALSWORTH Much love buddy. 🔊🔊🐈 Mr. Bassin' Bigals.
Been so busy lately not enough time to work on my own stuff ... I miss it ...thanks for the fix..
Hey FYI, welding sparks burn glass. They will leave little pits and pores that’s going to make the windshield compromised. It might make it blow easier. And you should always remove power and ground from the vehicle when you weld on it that shit will below 12 V equipment to smithereens it will backfeed through your amplifiers head unit electronics. All types of stuff can kill ECU very very bad, always unplugged, power and ground to the vehicle when welding.
Looks good do what ever you can to stay cold
Paul got it going on 💯
Jerry u ah man of all trades
Check out the terminals on the horns one could be lose or bad
Nope
I was thinking about a cool, kind of unique build for the channel and I believe you can pick them up fairly cheap.. a old milk truck lol, we have one at my job and I always look at it and think it’d be an awesome bass vehicle.
I use that chemical guys tire shine. The blue stuff. Doesn't fling, and stays on for 2 or 3 weeks. Stuff is awesome!
U said it yourself the positive wire was rubbed thru you shorted the amp out
i was thinking the same thing
Check your horn resistance... could be out of standard compliance aka not the proper resistance, it could cause the popping you mention
Thats sucks when you replace a amp and have to re configure your speaker and power wires..tad short..the story of my life lol
Check the crossover or DSP go directly and see if it persists
hey j I was looking for tht site for c max cause I'm doing my research on wht I wanna get but good video
mow that grass jerry!!!
I tried cable weed eater string , when it breaks off it will stick in you !🤕 I don't know if it will fit your weed eater but I upgraded my DeWalt 60v to a Husqvarna t35 after market bump head , I recommend,
you can flip amp and take top cover off and flip i think so if not take ds 18 logo off and flip it lol with heat gun and re glue it
Then the power wires won’t be long enough 😢
Nice save on the door!!!!
So the question i have for you is what made you choose 8’s and horns for the doors instead of a different size and tweet, and the amp size that you put to them?
I am up in the air on what size i want to run in my truck, have never had anything bigger than a 6.5 and only 1 at that. I want it loud but clear more than anything. Thanks for your videos and say hello to the crew and see you on the next video🇺🇸🇺🇸🇺🇸🇺🇸
The 8s have more mid-bass and I don’t like tweeters, horns sound 100 times better
@@JerryAintloud since you are basicly a single cab, are you useing just the front rca from radio or are you useing the rear set on any part of you build? Thanks
Sucks i cant go to sundown this year hopefully i can make it next year
Sounds like a bad ground or a bad set of RCA's that are causing the pop.
Steel cable unwinds over time on the weed eater.ask me how i know...i gotva blade for hd shit lol
Hmmm, maybe a spot weld at the end would be enough to hold it together?
Do u unhook the battery before u wield ?
Did it happen after welding? A welder can fry shit for sure
Before
Is that amp made in Brazil I know some of them you can’t have power going to them with out some type of load on it
: Yo Jerry I got a question I’m starting a new build for my car going 6th order I got the back port dial but idk what to do with front I’m playing low like you but my builds single 12 1:5 ratio 6th tuned to 17 in the rear it’s between 27-25 cube front haven’t done math for bracing and stuff I want it to be big enough for me to fit thru but not tuned to high to where it hurts my lows if that’s even possible
Isn't that amp supposed to be black like the rest of them? It looks like it started to get real hot and faded out.
Yup been like that for a month or so
What kit did you use on the steering wheel? I want to be able to remove mine also
Cheap stuff from eBay
Yooo
👍👍
Rca's
debs sis said hi lol you know her lol why....🎉🎉🎉
we still speek some
my 2 12s agint your big heavy 😢
Jerry me and my wife do decals if you need any work done
Also shirts hats coozies or anything else we can press on
DEAFBONCE amps suck I had one that WAS DOA
Can you please put up a link for those fans
Please
And
Thank you J