so I was given 2 cube lights without the wiring harness. just red and black about 6 inches worth on each light. I know how to splice in the wires but, can you reccomend a video for an install without the harness. like what wiring can i use to recreate a harness
+ShakespeareCafe Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
All I did was wire my lights to the back side of my trailer plug,, I put both red wires to the middle wire Wich is reverse lights and then put the ground wires to the white wire which is the Ground. It's that easy!! It looks Amazing!! So when I reverse the lights turn on with my reverse lights on my Tahoe. Easy
Good video, I'm going to install those lights on my 1988 Ford F250 front bumper for better visibility at night. That truck in the video sure is a rust bucket, if you hadn't shown that it was a Dodge at the beginning, I would've guessed it anyway. I used to own a 2000 Ram 1500 and it, like all of them was just as rusty.
That one is really rusty, I live in Colorado where most of the trucks don’t have rust like that and my 97 Ram 1500 is nearly pristine. Even better then my 2013 Ram 3500 and the 97 has 20,000 more miles
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
so I was given 2 cube lights without the wiring harness. just red and black about 6 inches worth on each light. I know how to splice in the wires but, can you reccomend a video for an install without the harness. like what wiring can i use to recreate a harness
1A Auto Installation videos HIGH QUALITY....You guys instill confidence in doing-it-yourself
This guy is the BEST!
+ShakespeareCafe Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
I spoke to a guy about installing my lights he wants $200 to install yeah ok thanks to this video I'll be doing it myself.
this is one of your better videos, when you take your time and explain the wiring that makes a great video, thanks.
+PBS #007 Thanks for the feedback!
You're a professional installer, we will be at CES Thank you for the content
+Crux Interfacing Solutions Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Seems like the wire is the strongest thing in that truck. It might even hold it together 😆. Good video, now I know how.
All I did was wire my lights to the back side of my trailer plug,, I put both red wires to the middle wire Wich is reverse lights and then put the ground wires to the white wire which is the Ground. It's that easy!! It looks Amazing!! So when I reverse the lights turn on with my reverse lights on my Tahoe. Easy
That’s a brilliant idea 💡
Good video, I'm going to install those lights on my 1988 Ford F250 front bumper for better visibility at night. That truck in the video sure is a rust bucket, if you hadn't shown that it was a Dodge at the beginning, I would've guessed it anyway. I used to own a 2000 Ram 1500 and it, like all of them was just as rusty.
That one is really rusty, I live in Colorado where most of the trucks don’t have rust like that and my 97 Ram 1500 is nearly pristine. Even better then my 2013 Ram 3500 and the 97 has 20,000 more miles
Can I wire these straight to my Factory fog light harness and use them on the oem fog light switch to cut them on 03 Tahoe
Can I use this same method for 6 pod lights attached to the same on and off switch? It's for a roof rack.
At 9:40 you can use an antenna just tape it to the tip and run it through till you see it in the other side
+Mark Guerrero Thanks for the feedback!
That harness was meant to be used for a single light bar hence it has one connector good video nonetheless
Big help, thanks brother. "You do you Boo Boo" LMAO
Dang, that truck has some serious rust problem
It's a Dodge.
All business on the front/top, partly in the behind/under
You explain it very easy, looks like I can do it. Thanks for sharing. #PEACE✌🏾
If we have a 12v 36 w led strobe 2*6 led bars small one. Should i put negative to battery's negative terminal? Or to the chassis?
This wiring will drain the battery every 4 days , I did the same wiring
The leds and wires are worth more in copper than the rust box of a truck you pulled out of the junk yard .
Nice light
How would I wire to the reverse lights (preferably with the tow plug adapter), but keep the toggle switch so can also use as work lights when needed?
+robert reed You could wire in parallel to the relay to power the lights. Thanks for checking us out! 1AAuto.com
So you said use ext wire. But nothing on what number gauge wire you used ?
i bought the harness with 2 male adapters/plugs, the only splicing i did was for extra length...
The magnet is unnecessary it just lays there as u twist in perfect position ,besides that great install video
+Fabian Lara Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Where did you put the relay
Great video!
+Austin Winkles Thanks for checking us out!
What brand name wire stripper is that please?
I never tap on or around the terminals
YEAH!!
+Mark Guerrero Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Do you sell a splitter for 2 lights? Would be a good option.
You can buy a harness with a splice for 2 lights
What is that little red cable attached to the ground 😳......
Oh my gosh I need those mud flaps! Anyone know where I can find emm!?
I would totally run those on my 97, there awesome
🤙
God forbid they would give you enough for the job you want done. All I see is possible failure points.
What gauge wire for your extension wire?
16
U do u boo boo 🤣🤣🤣🤣🤣
Can you put up more videos of you talking to trucks? 12:40
+Will We will get to work on that!
😎👍
Did you just call me boo boo
Not everyone has a nut and bolt but everyone has a compressor so just head over to 1a auto and grab a useless tool.
Calm down sir it's still a dodge