How to Replace Front Engine Mount 2006-2012 Ford Fusion
Vložit
- čas přidán 25. 08. 2024
- Buy Now!
New Engine Mount from 1AAuto.com 1aau.to/ia/1AEM...
This video shows you how to install a new engine mount on your 2006-2012 Ford Fusion. A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts.
This repair was done on a 2007 Ford Fusion SEL 3.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• 10mm Socket 1aau.to/obyM/1A...
• 15mm Socket 1aau.to/obVx/1A...
• 21mm Socket 1aau.to/oaya/1A...
• 8mm Socket 1aau.to/obyM/1A...
• Pliers
• Ratchet 1aau.to/obYD/1A...
• Socket Extensions 1aau.to/obVx/1A...
• Torque Wrench 1aau.to/oa28/1A...
• Cloth Rags 1aau.to/oKL/1AX...
• Fluid Transfer Pump
• Gloves 1aau.to/oaMY/1A...
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oaqi/1A...
• Wheel Chocks
• Wire Brush 1aau.to/owK/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Excellent video. Clear and concise. Great camera shooting and lighting to. You've shown me that I can replace my engine mount myself with relative ease and for that I thank you heartily. Good job!
These videos are seriously helpful
W video bro
Ok where exactly is the area I put the jack to lift the engine?
Does the splash guard have to be removed before placing support on the oil pan?