How to install Start-Scan Car LED Hood Light
Vložit
- čas přidán 25. 12. 2022
- Installation tips:
1. Apply double-sided tape to the two inner sides of the cover.
2.Fix the light bar on the double-sided tape.
3.Wire connection:
A. The black wire is connected to the negative pole + the red wire is connected to the ACC = the engine starts to light up.
B. The black wire is connected to the negative pole + the red wire is connected to the DRL = turn on the DRL to light up.
C. You can install anywhere you want
buy it:
sourl.cn/ZHLawz
Making my way down, to China town
When I break down
@@ninjaninja9954 wanton frown
😂
Bruhh i did not come here for this😂😂😂😂😂😂😂
@@ninjaninja9954when you bow down
As a mechanic please don’t wrap wires around fuses buy a fuse block connection that has a in-line fuse please otherwise will have the fire department putting your car out of fire
Would it be best to attach the hot wire to the positive on the battery?.. I’ve tried finding out as much info as possible on how to install this on my dodge dart and they’ve not replied to me anywhere
@@EdKingCole No because then it will be permanently on.
@@EdKingColejust attached to parking light or acc wire
What about just connecting to front side light, then it's just turning them manually on?
This is probably the most unsafe install I've seen of one of these yet. Last two I bought come with a fuse tap. At least now I know which brand not to buy.
Simple enough to do...Thanks
“Organize fixed wires”
Shit is in shambles 😂😂
😂😂😂😂😂😂I was thinking same thing
Thank you for that informative video that was awesome
You definitely don’t want to do it like that far as the fuse.
Get a Fuse TAP Adapter.
What if the light strip you are using already has a fuse attached down the line?
@@TheGoldenPhantom As long as it’s not connected directly to the fuse. I’m confused of why he did this video like this.
What’s a fuse tap adapter?
@@elsamach5616 A fuse tap turns one slot into two slots, Provides one fuse holder to protect the existing circuit, and a second fuse holder to protect the new circuit. You would take the original fuse out and use the adapter then put the original fuse into the adapter and the fuse that comes with the adapter. It keep it from surging.
The way he did it would for sure blow a fuse
@@time4u2losethe-take-over25 thank you. I got one and my nephew the mechanic installed everything … it’s working good so far 🤗🤗🤗thank you…
For a a strip that has the intermittent/directional option, where do you connect them so it not always on?
Thank you for the video.
Nice one💪🤝🔥👍💯
Making my way down, to Transylvania 🧛♂️
what length did you use?
Which one would that be for a Nissan Altima 2019 SL
Front of car, with acumulator i dont have fuse box and what can i do with negative pole
Which Fuse do you connect it to?
I have 2020 F150. Which fuse should we connect the red wire to? Thanks
Hello my car is Ford Edge, can I connect the LED light to my alternator fuse?
Φίλε μού Πολύ καλό!!!!
Congratulations, you just taught everyone how this shouldnt be done.....smh. Do wiring the right way, dont wrap fuses, use an actual jumper with the correct amperage fuse. Teach people the correct ways to do things.
How do I know which fuse to use it. When I hook it up to IG coil it stays lit I want it to turn on with the engine I have Honda accord 2014 plz help
2022 Ford Escape S - any insight on this particular vehicle ?
where can I find the ACCC fuse in Toyota Camry 2016?
What fuse should I connect it to in Nissan Xtral 2017? help please
My led lights won't shut off, and I did exactly what the video said I should.
Probably connected it to a main fuse and not a fuse that connects to the main functions. Try 15
did you figure it out?
@@jmanvengeance No, I ultimately gave up. But that's okay. I'm trying to repair the convertible roof now. Lol
I had the same problem in that I can't seem to find any fuses in the engine fuse box that don't continuously supply power. I wonder if I can just tap this thing into my fog lights instead.
@@lanz637 ya so i figured out the fuses im looking for are on the inside n i have no clue how im supposed to run the wire
I can only see Terry Crews when this song plays haha
Can u use any fuse for red wire
Is this safe to do without disconnecting the battery? Obviously I’d also use a jumper and not a wrap around
You're supposed to use a fuse tap and not have the wires wrapped around the fuse connector like that.
Very good!!
Very bad
How do I find the right fuse
What is the ACC fuse??
And do all car's have it?
Hi, could you help me, I have a Audi a3 s-line 2019, i try so many times to get acc fuse, but I don’t get it, can you help me to find acc fuse please?
How did you know which fuse was for the ACC? I have a 2021 VW Tiguan and would like to do the same. Please respond! Thank you
dont do this .. look up HOW TO SAFELY TAP INTO THE CAR FUSEBOX
@@KutaPuta Thanks Bro! will do
So how did you found which fuse to use?
@@cyqloneonline4855 If you look in your vehicle's manual, you can see the fuse box, the type of fuse and the circuit it is being used for.
In my Swift ACC 20Amps is always ON for dome light & door open sensor without key, so I decided to tap into Ignition fuse so that when key is turned to that powers the drl strip...
can you cut any length?
What fuse was that?
Are you leaving that wiring all messy?
Wiring black to any random "screw" ?
How to Locate the ACC Fuse on 2013 Ford Explorer
Thanks for this video. Installing mines the same way.
Please install the right way and not the Chinese way
So on my fuse box the fuses cant be pulled out, can you attach the positive(red wire) to something else like the positive battery terminal?
Pull harder on the fuses. There is no such thing as a non removable fuse. If there was then they wouldn’t put a fuse. Use pliers. And no you can’t just attach to the positive battery terminal or it will never turn off
@@BillOfAllTrades2016 I have an 2010 lexus ls460 the fuses aren't removable. You have to replace the whole module called junction box. I can see if there's maybe a different fuse box under the hood but the main one next to the battery wont work
@@BillOfAllTrades2016 personally I would use a different fuse I can wire in
If you put it on the battery it won't turn off
Hi, I have got a Ford Fiesta but can’t find the ACC fuse? Any idea what number it is? Thanks
Number? 😂 in the fuse box lid must be printed the diagram. Get the one related to acc
How do I install on a 2022 Volkswagen Tiguan need help
I need help please! Once I connect the wires the light stays on and doesn’t cut off
u ever figure it out? i have the same issue
Can someone help me, how can I know what the ACC fuse is or where it is located, to connect the red wire? The car belongs to my daughter, it is a 2023 Mitsubishi outlander model.
I almost vomited from the music, but thanks for the tutorial.
Lol😂
Hi, i need help to find the ACC fuse on my Mazda CX5 2013 in the fuse box! Any one please, txs.
I cant find ACC fuse, does it have anither name? I have a MGzs ev 2022 plate . Anyine can help which fuse it is?
what gauge wire (red/black) is that?
Probably loose strand aluminum speaker wire...
Probably not enough to power the led strip lol
Just use 20-18 gauge wire every automotive wiring
He even placed the fuse the wrong way.😂
Si lo conectas al fusible no se apagara la luz queda permanente encendida 😢
I have a 2006 Vivaro with both the battery and fuse box inside, how would I feed the wiring inside 🤷🏼♂️
Through the fire wall
How to find where the acc fuse
What is AAC?
What fuse did you connect it to
There going to be different for every car what car/truck are you planing on doing it in
It was the Adaptive cruise control that's number 8 in most cars. On the driver side.
I have a Audi a3 2019 s-line, what fuse I have to connect??
Just use it with relay or smaller
Thanks for easy instructions
how many meters in front of VW Tiguan2017
Please what does ACC mean
I didn’t see it scan. And mine has tape on two sides, which I am not understanding at all.
LMAO don't forget to buy a fire extinguisher to keep under the hood as well....
Je n'ai pas compris à quel fusible je doit brancher le fil rouge ? Une explication merci
Un robinet à fusible transforme un emplacement en deux emplacements, fournit un porte-fusible pour protéger le circuit existant et un deuxième porte-fusible pour protéger le nouveau circuit. Vous retireriez le fusible d'origine et utiliseriez l'adaptateur, puis insérez le fusible d'origine dans l'adaptateur et le fusible fourni avec l'adaptateur. Cela l’empêche de monter en flèche.
Wich fuse?
Can this way wiring to the fuse void your warranty ?
Yes sure
With past experience yes it will and it will also have the fire department pulling you out of your burning car I was lucky I got out before the car was totally gone but it was a total loss a 5 grand loss I had a 2012 nissan loved that car
Mine wont turn off not matter which fuse I used
Essa instalação aqui no Brasil, chamamos de Gambiarra 😂😂😂
Which is the acc fuse? I have 2019 VW Jetta
So I have an issue I have a 2012 nissan sentra but no matter what fuse I connect it to it wont turn off when I turn my car off
Me too for a 2012 Tucson ix35 any fuse in the engine compartment fuse box that I connect it to supplies power when car is not started.
Install it with switch. Just put fuse 7.5 amps or lower
Cómo ubicar el fusible ACC en Ford Explorer 2013
Si conecto el cable rojo al fusible de la radio que está en la caja de fusibles funcionará igual y el cable de color negro al cualquier tierra del auto
Can figure out how to install it on a dodge dart.. anybody know?
I have a nissan rogue 2019 and couldnt locate the ACC fuse or DRL fuse ..what other options do i have to install it
have you made it?
The best way is to try it in the fuse place if it’s turn on it’s not the good one , if it’s not on mean it’s the good one that it will work only when the engine is turn on , I was having the same issu the light stay on then I do some research and find this option !
I have a 2010 acura mdx and the fuse for my radio is a 40 Amp fuse, thats not too much power for this strip?
Absolutely,with 40 Amp you will put the leds on fire and the wire will melt down.The best thing to do is to use around 1 or 2 Amps,otherwise you will need to add a resistance depending of the Ampers you will use.The formula is R=V/I .
@alvarot6058 that makes sense but all these other people who install these LED strips tie into a much higher amperage fuse and don't have issues. It's confusing lol
The smallest fuse I found in the entire car is 7.5amps
@@fortunatedad7695that's enough I recommend use 1 relay or mini relay
I can jump higher than peanut butter
Que bagunça de fios, socorro!
Simplicity at its best 🎉
Black is connected to the screw? What screw is that?
Doesn’t matter as long as it’s on the base metal frame. Just to ground it.
That was a bolt holding the side panel to the frame. Wasn’t even the battery.
@@heydude21687dummy that wasn’t the battery
I have a question so what fuse does the positive wrap around goes on because I have a ford explorer 2016. So which one or does it matter?
Think he missed a step after wrapping wire around the fuse. After you put back the wire wrapped fuse you need to take exactly 1 cup water and pour it over the fuses to help the connection while car is on
Yeah best to use purified water to avoid additional additives.
I knew nothing about installing fuses 30 minutes ago. This is my 3rd video and I already know that isn’t safe. You have to somehow put that stripped wire as add on to a current according fuse. Don’t go over or under the electric power of that color fuse.
I was hoping this video would teach me more about this but you installed the lazy way which isn’t safe. That negative wire isn’t protected or something as far as I know and can short or start a fire.
Someone correct me if I’m wrong I just watched semi long videos so far.
Totally agree . Do you know how we can do it to install it ?
No works on Toyota Rav4 2020
I wish I knew the wiring ahead of time. I had to put it into the shop and pay to much.
This is a scam. The fb ad shows the light scan from side to side when you start the car but in reality it’s just a plane white LED strip that all lights up solid. What a jip!
That’s what I came here to see too it’s be worth it if it had the effects
It should have dynamic lights. It also depends on where you connect it to
There’s 2 kinds, some have start up some dont
What Is ACC? I don't see that in my car manual.
:D
Any wire that turn on when you turn the key on without turning ignition
Gambiarra
I had same issue evrything worked out but my light does not turn off i picked a random fuse as my fuse layout on sentra 2014 is slightly different
Yup the light won't shut off only way to do it is to cut in to the head light wiring and install it that way
thats because you used a fuse that always have voltage in it choose a fuse that only has voltage when you put the key on so when you turn off the key the lights will go off ;)
@@chucotacos661 that seems about right fml 😢
Use a fuse that doesn't stay on all the time,u can check it with a light tester
Mine won’t shut off when I turn the car off?? Why is that??? Help ????
Your not suppose to keep the pos connected direct to the battery. The ground can stay, but you want the positive to be on a switch side of your lights or something that turns on with the car. You can tap into the headlight fuse, i dont reccomend that but just watch some other LED install vids for cars, its all the same for the most part.
Which fuse was that he wrap that wire around that was not a relay what is the name of that fuse location
Absolutely horrendous wiring! Fire waiting to happen
Just what I was thinking.....
This video demonstrates all the things you shouldn't do with vehicle wiring. Good job VW don't do electrics like this when the build the car.
To what fuse has to be connected?
I’ve got an abarth
@@Nickotinas123I recommend use it with small relay or any relay. Here's diagram
30- to the battery terminal with fuse (5or7.5amps)
86- switch (2way connect common wire to ACC wire)
85 - ground
87- drl red wire
Why don't you use a piggyback fuse wire, as opposed to that junk installation. That's tacky.....
🧐🧐🧐
hi great video thank you , but how dose the light comes on and off , is it when you start the car ? or when you open doors ? and you connect red wire to ACC is this aircon ? what is the Acc? I have tried different ways and or I cant get car to start haha hope to get back a quick answer cheers
ACC is "accessory" - So it would turn on when you turn the key past lock into "ACC". So whenever the stereo turns on basically.
How to find ACC inside your fuse box? I checked mine, none of the slots has ACC marking.
Esse fusível é do farol, assim, ele só ascende quando ascender o farol. Dentro da tampa da caixa de fusíveis está indicando qual é.
If you haven’t done so already, Google your vehicle, the trim level and Fuse Box schematic. That should give you what you need.
Me too...none of mine are labeled ACC. and I tried all and found none that aren't always supplying power when the car is off.
Just use testlight. You can't wire automotive without it. May cheaper when you diy it
@@lanz637did u find an option please ?
Oh, it does not turn off it stays on all the time
Holy shit did the Verge install this?
This is a basic, not so safe, inexpensive way of doing it. I’m not to sure about the whole wrapping the wire around the bare metal of the fuse and just shoving it back in place. 😮😳😑🤨🤔
I've done this for over 15 years for many different connections with no issues.
I came for the music.. 🥴
How not to wire leds in your car
Twisting wires onto a fuse like that is extremely dangerous! Its a massive fire hazard!
Any loose connection like that can cause heat and sparks and in a engine bay theres fuel fumes, oil even hydrogen coming off the battery and a stray spark can ignite any of these and with all the plastic of the fuse box it wont take long to turn your car into a burnt out shell!
😂
😂😂😂😂🤦♂️🤦♂️
Use proper tools, wire stripper {not scissors}. Hide cables properly routing beside engine bay and as stated in other comments, use a fuse wire adaptor to tap in. Don't wrap wire around fuse.
use a fuse wire adaptor to tap in... why?
@@alcifrerdewich2323you don’t want to wrap wires around the fuse as it will catch fire . buy fuse tap adapter to connect to main fuse the use the wire connector to connect whatever it is that you are trying to connect.
typical chinese "quality" - best of luck to all the buyers :D