How to Fill/Patch Spoiler Holes
Vložit
- čas přidán 30. 11. 2023
- We are going over the steps to fill OEM spoiler holes for a 2020 Mustang EcoBoost with the intent of installing an aftermarket spoiler. The steps will also include painting the trunk to match the OEM paint.
Important: Rattle can paint is very difficult if not impossible to obtain 100% match as there are just too many variables, especially regarding metallic colors.
1. Intro - 0:01
2. Remove Old Spoiler/Lip - 0:28
3. Step 1 (Chamfer Holes) - 1:07
4. Step 2 (Scuff/Prep Surface) - 1:54
5. Step 3 (Clean Surface) - 2:30
6. Step 4 (Apply Tape) - 2:55
7. Step 5 (Apply Glass Reinforced Filler) - 4:03
8. Step 6 (Sand Glass Filler) - 5:25
9. Step 7 (Clean Surface - IPA) - 5:37
10. Step 8 (Apply Glazing and Spot Putty) - 5:55
11. Step 9 (Sand Spot Putty) - 6:29
12. Step 10 (Wet Sand Surface) - 6:46
13. Step 11 (Clean Surface (In & Out) - IPA) - 7:05
14. Step 12 (Apply Primer (Inside)) - 7:20
------------ Method 1 ------------
15. Step 13 (Prep Surface) - 7:37
16. Step 14 (Apply Sandable Primer) - 7:47
17. Step 15 (Wet Sand Surface) - 8:12
18. Step 16 (Clean Surface - IPA) - 8:28
19. Step 17 (Prep Surface) - 8:39
20. Step 18 (Apply Base Coat) - 9:01
21. Missing Footage Issue
------------ Method 2 ------------
22. Step 19 (Remove Trunk) - 10:28
23. Step 20 (Sand Trunk) - 11:20
24. Step 21 (Wet Sand Trunk) - 14:11
25. Step 22 (Clean Surface - IPA) - 14:56
26. Step 23 (Apply Sandable Primer) - 15:07
27. Step 24 (Wet Sand Surface) - 15:42
28. Step 25 (Clean Surface - IPA) - 16:03
29. Step 26 (Prep Surface) - 16:13
30. Step 27 (Apply Base Coat) - 16:26
31. Step 28 (Prep Surface) - 17:28
32. Step 29 (Apply Clear Coat) - 17:38
33. Step 30 (Install Trunk) - 19:18
34. Show it off! - 19:49
Paint Supplier:
www.automotivetouchup.com/
Products Used:
This video contains affiliate links for which I may receive compensation.
2K Clear Coat - amzn.to/3lxsxgp
2-in-1 Filler & Sandable Primer - amzn.to/3uAreoN
91% Isopropyl Alcohol - amzn.to/414EgY8
Black Nitrile Gloves - amzn.to/3TvBVjI
Body Filler - amzn.to/49ZzSNN
Body Filler Spreaders - amzn.to/4a1B0R0
Center Punch/Stepper Bits - amzn.to/3K70pLt
Deburring Tool - amzn.to/3lJXmif
Disposable Drop Cloth - amzn.to/3wqJ1xk
Eraser Wheel - amzn.to/411MQXk
Fishing Line - amzn.to/3R5oMyt
Glass Reinforced Filler - amzn.to/3Ta94EV
Glazing and Spot Putty - amzn.to/4122HVW
Mixing Board - www.harborfreight.com/mixing-...
Painter's Tape - amzn.to/3MvGM1b
Respirator - amzn.to/3MOE08f
Sandpaper (60-5000grit) - amzn.to/47XJFlI
Tack Cloth - amzn.to/3TiAR2W
Trim Removal Tool Set - amzn.to/35Lry84
Tools:
1/4" Socket Wrench
7mm Socket
10mm Socket
91% Isopropyl Alcohol
40lb Fishing Line
Body Filler Spreaders
Deburring Tool
Disposable Drop Cloth
Drill
Eraser Block
Eraser Wheel
Glass Reinforced Filler
Glazing and Spot Putty
Microfiber Cloth
Mixing Board
Nitrile Gloves
Painter's Tape
Respirator
Safety Glasses
Sandpaper (80-1000 Grit)
Stepper Drill Bits
Soap and Water Solution
Trim Removal Tool Set
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on CZcams is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on CZcams. Use this information at your own risk.
#HolePatch #SpoilerHoles - Auta a dopravní prostředky
Very informative, but what this shows me is that I need to take my trunk in so that a professional can do it, lol
That's always an option
@@mcgurrentertainment Yes, no hate on you/the video, in fact I'm super impressed by your ability and don't think I have the same ability to do this
You are definitely good. I'm just know enough to be dangerous. I greatly appreciate the positive feedback
I always enjoy seeing your videos! I can tell you put in a lot of work into them. Thanks for all your hard work I have lean so much for you!
Thank you for the support
Really enjoyed video
Thank you very much
Great video.
Thank you
Hey man what spoiler did you put on there and does it require drilling, also is there any good 2016 mustang no drill spoilers you recommend?
I believe the spoiler was a GT350R spoiler (www.americanmuscle.com/gt350r-style-spoiler-primed-1517fastback.html), and it did require additional drilling on the edges of the trunk.
There are a few spoilers on the market that use the factory spoiler holes. I dont have a specific brand or style in mind. It all depends on your desired style. Best method, find the style you like, and check the reviews for factory hole usage. We did post two videos for the spoiler install that uses factory holes.
@@mcgurrentertainment cool thanks man, also do you think you can link me the videos of the no drill spoilers?
This is the only one I know of that is still active: czcams.com/video/lrPjiye7t5U/video.html
I sir love your video and insights please what's the actual name of the deeper end tool you're using that looks like a fork???
Are you referring to the Fastener Removal Tool (Step 19 - 10:30)?
@mcgurrentertainment no the tool you used to widened the holes not the one you used with the drill and white marker pen...
Deburring tool?
Could it be done with normal filler or does it have to be the glass filler?
I would recommend glass filler over body filler due to fiberglass fillers offer superior structural support. The rigidity provide excellent reinforcement for repairing holes, cracks and tears. The body filler is more ideal for dents, dings, and leveling surfaces.
@@mcgurrentertainment that’s what I thought I’ve had some tell me the same way you done it basically but with normal bondo. I’m like wouldn’t that cause cracking or falling out considering there’s nothing in it too help hold it and reinforce it?