you sir are a godsend , bless you ... I've used a few different videos to prepare for this task but yours i keep coming back to and the fact you did this one handed while filming lol.
Thank you. You will be fine. Just take you time. And find. The right place for you bolts and. Mark them. If you have any questions leave here I will do my best to help you 😀😀😀
If you bolts no rusty. And are easy to get it The do it. Ut you really dont have to. Any question leave here in the comments I will do my best to help you. 😀😀😀😀😀
Thanks man! I’m doing mine today and this helped before I was going to remove exhaust. You may want to clarify it’s for 2wd not 4x4 as it didn’t have the TC. I’m not sure if either is longer tho
I actually started last night. About to take starter off now then the 4 nuts on the TC, then trans bolts. Your video is super helpful man. I may have questions as I go. Installing a used one back in afterward.
I don’t have it up as high as you but have a 3” lift. I took pan and valve body off to give more clearance. Going to try and wiggle out using regular 1/2 tons Jack and some scrap wood with it ratchet strapped
@@1Wayfix how do you connect the TC back to the flywheel? Just bolt one on then spin thru bottom of trans like you did to remove? Or do you have to manual crank engine over with a socket on crank bolt?
Watched the entire video GOOD FUCCIN job !!!!🎉🎉 Now I’m not scared to take mines out! U speak very clear English as well!!!! I take my hat off to you 🧢! Also, my question is on my 04 F150 I have a fly wheel that sounds like it is grinding, but will it be my torque converter because Im loosing power I can send you a video?
Thank you. I believe. That sounds. Is not. Come from you flywheel. I think it comes from you starter. When the gear. Get lose. Moves to the flywheel and start making that noise. I think i got a video. Let. Me find it.
@@chrisb900 i dont have lift. I do it with a jack and 2 stands. I start working on car. At the 16 yrs old. I been. Finding tricks on the way. And. The best trick. Will be love what you doing. And share what you know …Thats make everything easy. 😀. .
you sir are a godsend , bless you ... I've used a few different videos to prepare for this task but yours i keep coming back to and the fact you did this one handed while filming lol.
Thank you. I appreciate. You comment. 🙏. Any question leave here. I will do my best to help. 😀
Great vid and clear step by step instructions. Thanks! I will do mine.
Thank you For you comment. 🙏
Thank you so much for this allot of people are afraid to do such a thing well hope I don’t mess up
Thank you. You will be fine. Just take you time. And find. The right place for you bolts and. Mark them. If you have any questions leave here I will do my best to help you 😀😀😀
Great Video !! Thanks For the clear instructions I'm going to rip out the trans this weekend 👌👊
I glad this video. Will help you. If u got any question. Leave here in the comments. I will do my best to help 😀
Your a beast bro props to you sir
Thank you. 😃😃😃 any question leave here. I will do my best to help you. 💪💪💪
Nice work, I’m gonna remove the exhaust to make it easier.
If you bolts no rusty. And are easy to get it The do it. Ut you really dont have to. Any question leave here in the comments I will do my best to help you. 😀😀😀😀😀
You are awsome! Thanks for the vid!
Thank you. Any question leave here I will do my best to help 😀😀😀
Great information given 👏👏
Thank you. Any question leave here I will do my best to help 😄😃
Bravo amigo! I raise your arm!
Thank you. If got any question. Leave here. I will do my best to help
Very good job my man very good
Thank you for you comment. 😀
Thanks man! I’m doing mine today and this helped before I was going to remove exhaust. You may want to clarify it’s for 2wd not 4x4 as it didn’t have the TC. I’m not sure if either is longer tho
Your welcome. I will. Clarify. But. It will be. All most the same steps. Just some extra work. Any question let me know. Thank you
I actually started last night. About to take starter off now then the 4 nuts on the TC, then trans bolts. Your video is super helpful man. I may have questions as I go. Installing a used one back in afterward.
I don’t have it up as high as you but have a 3” lift. I took pan and valve body off to give more clearance. Going to try and wiggle out using regular 1/2 tons Jack and some scrap wood with it ratchet strapped
@@chrisb900 should work.
@@1Wayfix how do you connect the TC back to the flywheel? Just bolt one on then spin thru bottom of trans like you did to remove? Or do you have to manual crank engine over with a socket on crank bolt?
thanks for the video...how do you get those top bolts back on bell housing ,motor
to trans mission
Sure any time you will have to Drop the motor with out the intake manifold Thats the only way. 😬😃
Watched the entire video GOOD FUCCIN job !!!!🎉🎉 Now I’m not scared to take mines out! U speak very clear English as well!!!! I take my hat off to you 🧢! Also, my question is on my 04 F150 I have a fly wheel that sounds like it is grinding, but will it be my torque converter because Im loosing power I can send you a video?
Thank you. I believe. That sounds. Is not. Come from you flywheel. I think it comes from you starter. When the gear. Get lose. Moves to the flywheel and start making that noise.
I think i got a video. Let. Me find it.
This is. The video. First I thought it was the fly wheel. But. End up the starter. Was bad.
czcams.com/video/nvi_3OToxnQ/video.html
you need to have a gopro or something with a light, your videos are very thorough if you had both hands available it will rock!!
Thank you for you advice. And comment🙏😃
👍👍
Any question leave here I will do my best to help. 😀😀🙏
For a 2010 ford f150 stx 2x2 is it the same removal proccess or atleast close to it?
Yes it will be all most the same. You can use this video as a guide. Any question leave here. I will do my best to help.
Is this the same for a 04 old style body
I not 100%. Sure. But. All ford trucks share. All most the same patterns. So you can. Follow this video As a guide. .
Does nuts are not accessible through that hole for starter
@@relaxinglife8329 can you pint it with the timing line. What part of the video. U are referred please⬅️⬅️⬅️
lots of work
Well like 3 hrs. 😁. If. We got the right tools. Helps alot. 💪💪💪💪
How long to R & R trans
To drop it off. Took me around 1 hr and 30 min. To install. Like 4 hrs.
Any question leave here. I will do my best. To. Help. Thank you
Most time consuming parts are RR stsrter and RR TC from flexplate . Also absolutely must use a trans jack to line up housing properly
Realistically this guy is a pro, but the avg Joe with a trans jack and lifted on jack stands, it’s propbablt a 2-day job or a good 12-15 hours total
@@chrisb900 i dont have lift. I do it with a jack and 2 stands. I start working on car. At the 16 yrs old. I been. Finding tricks on the way. And. The best trick. Will be love what you doing. And share what you know …Thats make everything easy.
😀. .
Can you come and do mine
😬😂. Whats you location.
@@1Wayfix Are you in Ga...near Atlanta😂
@@napoleonarmstrong3648 😂😂😂😂 im in texas