poulan wild thing 2375 le chainsaw carburetor fuel line repair
Vložit
- čas přidán 9. 06. 2021
- carb
amzn.to/3wbaksS
check out my beautiful girlfriends etsy store www.etsy.com/shop/Sprunket.
todays t-shirt brought to you by YOUR NAME HERE
amzn.to/2RLsNcW
if this video helped you donate a buck or two to my GoFundMe account
www.gofundme.com/f/help-me-bu...
The small engine guys are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
This is by far the best video I seen on replaceing my fuel lines.Thanks!!!
Glad it helped
This is the best of the videos on the Poulenc wild thing. It also addresses the carb screw settings
glad i could help
Thanks for helping me double check the fuel line placement started questioning myself. Went through the whole replacement process on everything but the carb and still couldn't get it started. Took carb apart fuel inlet screen was caked. Scraped it off and gave it a blast of cleaner and running like new. Thank you!
I purchased the carburetor kit, and it didn't come with any instructions. I was lost until I found your video. I want to thank you for posting that video. I wouldn't be able to do it without your help. Thank you so much.
This video was exactly what I needed to replace my carb and fuel lines! My fuel lines were broken when I pulled the carburetor off. I should get a few more years out of that cheap little chainsaw now. Thank you so much!!
Glad it helped!
This is by far the most helpful video for replacing fuel lines and carb kit for the Paulin 2375 LE wild thing. It was such a clear cut help. Thanks for showing about the adjustment screw as well.. You da man!
Good video, showed exactly what I needed to do.
Thanks for making this video. I followed your instructions and was able to repair a chainsaw that had been thrown out on our street by someone who was obviously not mechanically minded.
Just pulled my dads out after 10yrs. Just ordered the kit. The fuel lines were wasted. So I'm going to go ahead and do this video exactly. Great video and very educational.
Good luck!
Thank you for taking the time to make this video. Very informative and to the point.
glad to help
Excellent, just what I needed to get my Wild Thing going... Thank you... great video
Followed this video and it worked like a charm! Thanks! The carb kit I ordered did have all the bigger gas line so I ordered some of the smaller stuff to get the job done.
Glad it helped
What I learned the most from this video: “Get it outta there!!” 😂
Extremely good video, very helpful Ty
Glad it was helpful!
Perfect video, thanks!
You're welcome!
you should have added a parts list, specifically which diameter fuel lines needed to fix this make and model of chainsaw. But other than that, you're showing us a pretty detailed explanation of how to get the fuel system fixed!
Everything you need is in the description
Bro one hand on the camera another working on the lines. I have two hands and I could barely do it. Great video!
Lol 44 years bud. Thank you!
clearest video iv'e found ! perfect.
Glad you like it.
Thank You.
You're welcome
Great visuals. Thanks.
Our pleasure!
You did this one handed and I think that's insanely impressive. I took it apart but didn't memorize what went where fuel line wise, helpful. You switched the fuel filter to the other line, I did the same thing before I watched the video just didn't move the filter over since I thought that's were it went in at first
glad i could help
This helped me alot keep the good work up i am subing rn
Thanks for the sub!
This is a real walk-through right here
glad it helped
What is the correct diameter of the fuel line on the right side? I've been trying to use 3/16" OD. I have a garage find, brand new never used one fuel line crumbled filter was rolling around in the tank.
Seems originally they built it with a 2 part hose joined at the port with a nozzle between the 2 lengths. I had to push out the nozzle from the top.
the second one and fourth one amzn.to/3wp71Qs
I have a piulan 2375 wild thing both lines go in the same side how do the lines get ran
filter line goes to right of carb left of carb to short nipple on primmer long nipple on primer to tank no filter
Surprised there's not a whole lot more views of this one, or comments. Near perfect, my only concern will be leakage around new 'In- To-Tank -Hose',, as some guys drill those tank holes for reasons I hope I don't run into or ever need to know about. But near brilliant show. Fast, no tedious slow turned screws while you talk about how tough your day was. Perfect views, even deep in tank and just a damned good video man. And I mean that. If they were all like yours, the world's repairs would be three days ahead. I'm subscribed right now. Some odd reason yours didn't come up first. Must have watched 45 minutes of nothing of use. Two days later, same keywords, yours came up. Whew! Thanks!
newer videos will show up first sometimes. im not sure how it all works yet but trying to get to the top
@@smallengineguys Well, I sure hope you figure that out. Yours was a slam dunk, in your face, fix it, get it done, get it done now and fast and right. It should definitely pop up first .
@@realsecman i think the more thumbs up views and messages i get the further up the list i go.
Good idea to check if intake manifold tight also or will never run right.
I replaced all the fuel lines, and cleaned the car. The saw will not run hot and it's hard to start with cold. Do you think the diaphragm in the carb is week?
I tryed adjusting all the screws, my idle is maxed out just to get it to idle when it can.
carb is shot just get a new one
carb
amzn.to/3wbaksS
@@smallengineguys you the man!
Hey I have got a question, maybe two. Would the fuel line on this saw be the same as a Poulan 2055LE? Secound is there anyway to tell whether a Poulan 2055LE is a Type 1 or 2 without the serial number lable and carburetor?
same fuel line. there are 2 types of carbs 1 has 1 intake por the other has 2 intake ports. look at the intake manifold is it 1 or 2 ports
Help, I need help... my wildthing has different numbers. I need kit like yours. immediately
It's the same kit
Wish the camera filmed the work area more than the bench. Thank you for posting though.
old video one of my first. i have newer ones out.
@@smallengineguys All good my friend, you’re video was better than most out there. I should have said so originally. I was just too fixated on the negative aspect of the video because the internet sucks and I fell into the trap of arrogance and dickishness. I apologize for my ego and I appreciate you taking the time to put this video together. It helped me in more than one way on my rebuild and I’m thankful for your help.
i started this channel because of the corona virus. i figured people were not going to be able to afford to get stuff fixed so i would show them how to do it themselves. its all i am trying to do is help.
So much better video than many others posted on Boobtube. Thanks!
Wow, thank you!