Baja Warrior Mini Bike First Start and Top Speed (1080P)
Vložit
- čas přidán 5. 07. 2011
- This is a first start, walk around, and top speed run of my new 6.5hp 196cc Baja Warrior Mini Bike.
My 5 year old Mini Baja is getting really beat and is in rough shape so I thought it was time to retire it and get a new on. Decided to get the baja warrior this time because I like the look of it a bit more.
I'll keep the other one functional as long as I can but it's going to be mostly a parts bike now. The first thing I'm going to steal from it is the torque converter and just give it the stock centrifugal clutch gear reduction system from the new Baja. - Auta a dopravní prostředky
i remember as a kid and racing minibikes at the Saddleback Motorcycle Park in Santiago Canyon, Southern California. I was sponsored and raced for " The Hawk " Racing Team. I rode a modified Zebra Mini Bike, with a 6 horse Techumshe motor punched out with a mikuni 26 carburetor running nitro methane using a torque convertor putting 12 horse to the rear wheel. I was clocked at speeds in access of 60 to 70 miles per hour. Those were the day's.
Y'all have some nice ass grass.
lol thanks
Michael p ha
I wish my grass was soft
I wonder if they put enough warning decals on the thing
Just sayn' the 16 and over rule was broke a long time ago lol
Couple crash n burns n they'll rub off
I'm so excited I'm getting one of these tomorrow and keep watching videos on them and they just make me more hype
Same situation currently😂 mine arrives tomorrow
How has it been?
would be nice to get a group of friends and start a motorcycle club with these..would be pretty bad as$ :)
yo I absolutely agree with you. I said the same thing
gmodesike we have a group here in phoenix Arizona
Search up Honda Grom group rides
gmodesike I’m getting one today
I have one also I painted it
iv had mine about 4years and I have done everything you can think of offroad with it stock and I'm 6'1 200lbs it is a really good trail bike.
Had one of these with Honda 8 hp motor, sounded like a Harley. lol ,it was fun and a bit scary. when clutch kicked in sometimes it would pop a wheelie.
Ive trying to figure out if a 301cc/8hp predator would fit without having to do really any mods to anything or the frame
Awesome. My cousin had one that we used to ride when we were about twelve. Loved that thing!
@dailee3 hmm not sure... gas on and flowing, choke on, kill switch in right position? oil full, gas full and fresh? spark plug connected properly and working? Engine not flooded? Try spraying some quick start into the air intake and seeing if the engine even attempts to start after that?
@braidraid Thanks! Glad you like em!! =-) More to come this summer hopefully!
I got one of these and it is insane. My dad bought it for me when I was 12. I almost never rode it. It got all gunked up and ran like shit.
I recently bought a yamaha ttr 125 and my lil bro wanted to try to get the warrior running and we had done some previous work trying to fix it so we kinda messed up the idling or something but after a bit of messing with it we adjusted the spring so you hold down the brake when you start it and let go of the brake and it just goes until you switch it off. At max speed it goes about as fast as my ttr in like 3rd gear but it is very unsafe so my brother won't be riding it until we can get it fixed properly.
For now it is a little fun machine for me and my friend to ride up and down the street together.
I think it is worth the money especially if you take care of it (unlike I did)
I'm not sure, you might be able to find them online somewhere if you do some searching?
Alright awesome! Thanks marcel! But just 2 more easy questions...well I hope their easy. But whenever I speed up my baja like 3/4 of the way on the throttle the baja wants to slow down idk what it is, might it be the governor or their designed like that? But I might have to clean the carb out too, there might be some junk in it.
you can make them road legal, add brake and tail lights, turn signals, and horn, upgrade the alternator to a 12 volts instead of 6 volts, you could change the front rim with a back rim for an additional front brake, and then it's street legal
It has dual rear drum brakes
I just bought one today for $100 haven’t been rode over a year ! Her husband bought it in 2012 & it’s just rusted on a couple parts , drained the oil today was old as hell , but other than that it’s dope ! Can’t wait to get it up & running so I can cruise on it 😎
Sounds like a good deal!
I have one I got it wen I was ten still runs great
Same thing happened on my old one, I just ignored it and was going to wait until the brakes stopped working before replacing them, that never happened. They've been squeaking for years but it still stops fine. :P
No problem! Awesome! :) I have seen the mb200's at the store every now and then, I've just never took one apart or looked closely at it. :P
I heard it can go up to 50mph?
@Emmonach It can. Just depends on what you do to it, how hard you are on it and how well you take care of it.
great video. i made a pipe out of scrap metal and a spray paint can then painted it with grill paint. now i need to save up for a torque converter! but my warrior is an '06 and the previous owner didnt take care of it and beat the crap out of it so i need to replace the rear tire and cables first...
Where can you get one of these nowadays? I've checked the Baja's website and the stores listed where you can apparently buy them no longer have them in stock.
VERY Kind of You, Thanks so MUCH !
I got one off these all black there sick I suggest getting one
Nice baja!! but ive never saw a 2011 baja 200cc on youtube yet... like i have a 200 warrior, ive got a light switch and it actually says 200cc on it not 196cc. but would i be able to get a torque converter kit too? like mine goes 40 kph and i can beat all my friends, but im wondering if i can get a kit too?
@Mrtechsauce there's a wire coming out of the front of the engine that the light plugs into, that I guess is hooked up to a little generator inside the engine.
i like your vids, i have a question, can this bike climb 60 degres or more hills,
@Emmonach Hmm that's totally up to you. If you plan on modding and customizing it then I'd say it is but If you just plan on keeping it stock then probably not. You could always see if you could find a cheap used one instead of buying new?
Hello, I was wondering, where did you purchase your mini bike?
Where did u get this because if been looking for one and can't find it
tractor supply co.
Second question, but whenever I go downhill and let off the throttle it sounds like the clutch chain or something around that area is rubbing, like when u went down the little hill coming towards the shed, errr, errr, errr. Something like that. Do you know what it might be?
you make really good videos man
Hey, I'm looking into getting one of these. Did this come in a kit? And is it ok to ride on the street around the neighborhood and stuff?
@RSAPshow Hmm not that I know of... Perhaps there's just a difference between the Canadian version and American version?
Damn Nice Bike DUDE!!!!!
It should. I have one from like 2006 that still works fine.
What’s the top speed?
I had one they are great trail bikes I like better then a dirt bike
that's cool does that light actually work?
How fast would this go with just the the torque converter and the throttle stop unscrewed almost all the way but still have the governor in. 35ish maybe???
so do you get a regular motorcycle tag for these?
Thanks! I think the mb200's are still the same 196cc engine as all the rest, at least that's what the specs say on baja's site. They just seem to have a bit different look and a couple extra features. So if that is the case you should be able to get it to do about 54km/h if you were to completely bypass or remove the governor.
And it would blow up
More mini bike vids and mods please. Yours are the best on youtube. Great job man👍
Thanks, good to hear! :D Although future videos from me will be few and far between. Don't have much free time nowadays. :P
*****
..?
*****
I see, lol :P
i think my clutch is whining when i first start accelerating, is that bad or does it just need to be broken in?
is there any more mods that you can put on this to make it go faster that you haven't posted on your channel cuz i want mine to go faster without the use of a torque converter cuz i got no clue how to put it on it looks hard... lets say i did buy one of those torque things does it come with everything inside to get it installed to my bike and where can i buy a brand new one i live in canada
I have the exact same mini bike and it is awesome
oh ok where did you get it? i was wondering because i was wanting to get one after i saved my money and i was looking at some online
@TheRealUyi its probably because its just a cheap centrifugal clutch on the bike? those always tend to make a lot of noise when they are in their friction zone before they fully engage.
Yes they are good for mud and trails. The best tip I have is not to leave it stock and perhaps invest in a torque converter for it because that makes like a night and day difference.
i do and that is cool thanks for the toon up vids i have mine going about 48.5
Awesome!
@monsterMAD42 sweet. :D did you end up getting one?
link to where can I buy this please?
Will these last me a while I want one like I don't want the cement to snap or the motor never to turn on again
in witch part of Canada do you live i was looking for one at a local Canadian tire in Montreal but i didn't find one ?
this might be a stupid question but, where does the light hook up to?
I live around the Hamilton area in Ontario. Hmm they might just not keep them in stock but you might be able to get them to special order you one if you ask someone? Not sure though.
i was wondering, how old is your old baja MarcelsWorkshop? i was just wondering about how long these things last. i was just hopin that it would last about three years?
Thanks! They're pretty cheap, around $600 when on sale. :P
You think it has enough warning stickers?
Im 14 and looking to buy one for light weekend trail riding. if i take care of it will it last?
I modded my last baja heat. It was tricked out but about 7 years old. Pretty rough shape till I bought it. Pretty much upgraded clutch. Made it a ton faster. Especially in asfault
@killerx680 NP. Glad you like em! =-)
nice. hmm its just the baffle you want? not sure.. you could try going to a retailer that sells em like Canadian Tire or TSC stores and see if they could order the part for you?
does this have a battery or does it produce electricity when its running because I want to add a brighter light(l.e.d.) when i get it
+Jake Mccoy Produces electricity as it runs.
Just got mine today from tractor supply throw some oil and gas in it started up 2nd pull and she's a real beast highly ecomend this bike
James Mey pouer
James Meyer how much do you way
Hi! Nice bike! I am planning buying this for myself? Is it decent size I'm a pretty tall guy. How tall are you?
hey i was wonderin if its worth the price or should i just buy a more decent bike?
I have no idea.. maybe not in a store but you may be able to find one online and have it shipped to you? They're a blast when you start customizing them. :D
Wait, this thing has no muffler? Or is it the tube on the right bear the rear wheel?
Depends if you plan on modding it or leaving it stock. Stock they are pretty boring but they get pretty fun once you start modding them.
I have in my other videos of this bike. This was to show what you get from one right off the showroom floor.
i just bought one of these a week ago, i was really lucky becuz somebody returned theres to TSC and they knocked off more than 200$ but ya itsreally fun once i get enough money im gonna get a tourqe converter but i gotta get a new car before that :)
As for the torque converter you should be able to but I've seen a video where it shows that it has a threaded crankshaft rather then tapped. So you need to find a special lug nut to hold on the driver unit and grind down some of the key way on it.
can you get these in the uk??? BECAUSE IT LOOKS SO COOL!!!
Holy jumpins thanks for answering those for me!:) I've never owned a baja so. But ill defiantly make a video of mine. If ya haven't seen an actual 200cc.
it has because i wasent the only one riding it my destructive friend got to go for a ride and his last peddal bike lasted him 2 days it makes no different now thoe i got a 07 dirt runner125 with no baffle got any idea where i could get one in NL canada
@bradbesoballa Which is pretty much the same speed as this one after I threw a torque converter on it.
@paddywagon101 hmm as far as I know just getting a stock torque converter to work is going to need some mods, but If you look hard enough you might be able to find one already modded to fit this? :-\
I live with the new one of a great
Not sure. Probably not until the spring or summer. I don't really do any of this stuff in the winter. Too cold and snowy lol.
whats the difference between a baja warrior and a regular one?
nice bike! how much was it?
@AlexanderBeans Not sure if you can order these through a website...? I got mine at Canadian Tire. I believe in the US you can get them at either Atwoods, Pep Boys, or TSC. Here they go for $700
hi can anyone help me i live in new york and i was wondering how much these take on oil and what kind should i use when chaging it. when i got the bike i got a bottle of baja oil and i put the whole bottle in. i wanted to know if that was bad or not please help thanks.
And I've been looking, and I cannot see the price for these, damn websites so what is the website you ordered from?
Nice! Sounds like you got an actual brand name engine for it. If something were to break on mine I would probably just get another cheap Honda clone engine for it, like what they come with. The 6.5hp 196cc clones are usually around $89-$129 CAD depending on if they are on sale or not.
Trying to figure out if I can put a 301cc/8hp predator on my old 196cc baja without getting into a lot changing of parts and no fab work to frame
Can't help you there, I've never tried. If it physically fits, my guess is you would at least have to drill new mounting holes for the engine or weld up a new mounting plate. You might have to relocate the gas tank and muffler on the engine if it ends up being too big to fit. My guess would be the 8hp probably has a 1" shaft instead of 3/4" like the 6.5hp has, so you would have to get a new clutch. Lastly you would probably have to add or take off a couple links from the chain depending on where everything lines up with the bigger engine.
@AlexanderBeans No Idea, it's not something I've ever calculated or has ever concerned me lol. I think the Baja site used to say approx 30-50mpg for these on their specs page but it doesn't say any more so don't quote me on that. :P
are these a lot more reliable than pocket bikes? i wanted a pocket bike but it seems that everyone who gets one feels ripped off because theres always one problem or another
I have a mini baja from like 2005 (bought it used in 2009) and the original engine's head took a dump. These engines are a dime a dozen so I found a 206 cc engine for 180 bucks brand new. It has alot more torque now. I just wish I could afford a CVT for it!
@horsemania1 Thanks! =-) Hmm, Just keep checking kijiji and stuff, I'm sure a cheaper used one will turn up sooner or later. :-)
Wow nice clear vid thumbs up
@CodieLee93 Ya in stock form it is pretty slow. It's because the engine is governed at 3600rpm and it is geared fairly low and only has the one gear. You can get it to about 31mph in about 5 min just by by passing the governor which brings the rpm up to around 5000rpm but that is hard on the engine for any sort of extended period. You could also remove the gear reduction system and go striaght from clutch to back sprocket and gain a lot of speed but you would loose lots of torque.
@bobchessy I guess thats pretty good then. Less then half price and the fixes seem like pretty easy fixes.
Hmm not sure what you are referring to "to do just that and be out nothing" to do what? They are really slow from the factory and in this video, so maybe you are referring to the video where I put a torque converter on this? If that's the case things like the torque converter not being aligned properly, under inflated tires, driving against the wind, and more weight could be bringing down the speed?
Take the extra gear sprocket off and run a straight one piece chain if you want speed. You will lose torque but the bike will do an easy 50 mph
Or, you can get a torque converter. My mini Baja has enough torque to pull a wheelie and go a little over 50mph. I'm only running a 7hp predator 212cc motor on mine.
Or, you can get a torque converter. My mini Baja has enough torque to pull a wheelie and go a little over 50mph. I'm only running a 7hp predator 212cc motor on mine.
+Owen Beers I have a homemade mini bike with a 3hp teucumse in it. we had to replace the old 5hp motor cause itd do wheelies
jr loza just put a torque converter on it and run the belt drive unhook the governor and you can run 60/65 mph I have a street legal Baja warrior 200
Just push the choke link or what ever it’s called, under the tank. 10+mph right there
That's a nice bike! How much did that set you back? Haha
What do you do for a living like your job?
@fransolis94 Thanks! =-) I don't know for sure if it can bacause theres no hills that steep around my house, but I would think with the stock clutch as long as you were moving a good speed before hitting the hill it would climb fine, but if you were to start on the hill from a dead stop the clutch might just slip. With a torque converter clutch it would prolly do fine though even from a complete stop.